AV摄像头选什么设备名？
本帖最后由 Wesson 于 2013-5-22 17:11 编辑如题，TQ210跑linux系统，接AV摄像头转换模块，该选什么设备名？ 自己先顶个 /dev/video0,这个手册应该是有的 是的，只是中间出现了点问题，所以再确定一下！ Wesson 发表于 2013-4-15 11:38 static/image/common/back.gif
是的，只是中间出现了点问题，所以再确定一下！
OK
##### EmbedSky BIOS for SKY210/TQ210 #####
This Board: SDRAM is 1024MB; LCD display size is: 800X480
Hit any key to stop autoboot:0
SD and FAT initialize success!
error during transfer: 0x00108001
mmc read failed
SD Read NG
error during transfer: 0x00108001
mmc read failed
SD Read NG
Without this file
return -1
Without EmbedSky.ini !
Start Linux ......
NAND read: device 0 offset 0x500000, size 0x500000
5242880 bytes read: OK
Boot with zImage
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Initializing cgroup subsys cpu
Linux version 2.6.35.7-EmbedSky (root@embedsk-server) (gcc version 4.4.6 (for TQ210 EmbedSky Tech) ) #1 PREEMPT Thu Nov 1 18:47:21 CST 2012
CPU: ARMv7 Processor revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: TQ210
Memory policy: ECC disabled, Data cache writeback
Truncating RAM at 40000000-5fffffff to -53ffffff (vmalloc region overlap).
CPU S5PV210/S5PC110 (id 0x43110220)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
S5PV210: PLL settings, A=1000000000, M=667000000, E=80000000 V=54000000
S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
sclk_dmc: source is sclk_a2m (0), rate is 200000000
sclk_onenand: source is hclk_dsys (1), rate is 166750000
sclk: source is mout_mpll (6), rate is 66700000
sclk: source is mout_mpll (6), rate is 66700000
sclk: source is mout_mpll (6), rate is 66700000
sclk: source is mout_mpll (6), rate is 66700000
sclk_mixer: source is sclk_dac (0), rate is 54000000
sclk_spdif: source is sclk_audio (0), rate is 24000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_cam0: source is ext_xtal (0), rate is 24000000
sclk_cam1: source is ext_xtal (0), rate is 24000000
sclk_fimd: source is mout_epll (7), rate is 80000000
sclk_mmc: source is mout_mpll (6), rate is 47642857
sclk_mmc: source is mout_epll (7), rate is 80000000
sclk_mmc: source is mout_mpll (6), rate is 47642857
sclk_mmc: source is mout_epll (7), rate is 80000000
sclk_mfc: source is sclk_a2m (0), rate is 200000000
sclk_g2d: source is sclk_a2m (0), rate is 200000000
sclk: source is sclk_a2m (0), rate is 200000000
sclk_csis: source is ext_xtal (0), rate is 24000000
sclk_spi: source is ext_xtal (0), rate is 24000000
sclk_spi: source is ext_xtal (0), rate is 24000000
sclk_pwi: source is ext_xtal (0), rate is 24000000
sclk_pwm: source is ext_xtal (0), rate is 24000000
sclk_mdnie: source is ext_xtal (0), rate is 24000000
sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000
s5pv210: 37748736 bytes system memory reserved for mfc at 0x2111a000
s5pv210: 37748736 bytes system memory reserved for mfc at 0x40000000
s5pv210: 25165824 bytes system memory reserved for fimc0 at 0x42400000
s5pv210: 10137600 bytes system memory reserved for fimc1 at 0x43c00000
s5pv210: 25165824 bytes system memory reserved for fimc2 at 0x445ab000
s5pv210: 8388608 bytes system memory reserved for jpeg at 0x45dab000
s5pv210: 12582912 bytes system memory reserved for fimd at 0x465ab000
s5pv210: 3072000 bytes system memory reserved for texstream at 0x471ab000
s5pv210: 3379200 bytes system memory reserved for pmem_gpu1 at 0x47499000
s5pv210: 8388608 bytes system memory reserved for g2d at 0x477d2000
Built 1 zonelists in Zone order, mobility grouping on.Total pages: 211328
Kernel command line: noinitrd root=/dev/mtdblock3 rootfstype=yaffs2 init=/init console=ttySAC0 lcd=X800Y480
user X800Y480 lcd.
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 512MB 320MB = 832MB total
Memory: 665940k/665940k available, 186028k reserved, 0K highmem
Virtual kernel memory layout:
vector: 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap: 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xff000000 - 0xffe00000 (14 MB)
vmalloc : 0xf4800000 - 0xfc000000 ( 120 MB)
lowmem: 0xc0000000 - 0xf4000000 ( 832 MB)
modules : 0xbf000000 - 0xc0000000 (16 MB)
.init : 0xc0008000 - 0xc0037000 ( 188 kB)
.text : 0xc0037000 - 0xc0848000 (8260 kB)
.data : 0xc0848000 - 0xc08982a0 ( 321 kB)
SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:393
VIC @fd000000: id 0x00041192, vendor 0x41
VIC @fd010000: id 0x00041192, vendor 0x41
VIC @fd020000: id 0x00041192, vendor 0x41
VIC @fd030000: id 0x00041192, vendor 0x41
mult
max_delta_ns
min_delta_ns
rate
HZ
Console: colour dummy device 80x30
console enabled
Calibrating delay loop... 998.15 BogoMIPS (lpj=1949696)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys cpuacct
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
regulator: core version 0.5
NET: Registered protocol family 16
S3C Power Management, Copyright 2004 Simtec Electronics
pmstats at 00000000
smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
S5PV210: Initializing architecture
s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000, tin=divclk, base 12
s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000, tin=divclk, base 16
regulator: pd_audio_supply: 5000 mV normal
regulator: pd_cam_supply: 5000 mV normal
regulator: pd_tv_supply: 5000 mV normal
regulator: pd_lcd_supply: 5000 mV normal
regulator: pd_g3d_supply: 5000 mV normal
regulator: pd_mfc_supply: 5000 mV normal
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-gpio i2c-gpio.5: using pins 44 (SDA) and 45 (SCL)
i2c-gpio i2c-gpio.6: using pins 118 (SDA) and 117 (SCL)
s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
Advanced Linux Sound Architecture Driver Version 1.0.23.
Bluetooth: Core ver 2.15 Wesson 发表于 2013-4-15 11:51 static/image/common/back.gif
OK
##### EmbedSky BIOS for SKY210/TQ210 #####
This Board: SDRAM is 1024MB; LCD display size...
亲，和摄像头有关的东西还没有打印出来哦。 亚瑟王 发表于 2013-4-15 11:54 static/image/common/back.gif
亲，和摄像头有关的东西还没有打印出来哦。
:hug:下面打印的放到另外这个贴子里了，麻烦到那解答“[问题咨询] AV(CCD)摄像头问题，求版主解答！1 [复制链接] ”，辛苦~~~ Wesson 发表于 2013-4-15 12:00 static/image/common/back.gif
下面打印的放到另外这个贴子里了，麻烦到那解答“[问题咨询] AV(CCD)摄像头问题，求版主解答！1 [复 ...
你到底想问什么问题？标题的问题在3楼已经给你回复了。然后又开个帖子。
页:
[1]