wince 6.0 启动不显示桌面
本帖最后由 qidaimengxing 于 2013-8-27 15:03 编辑我自己编译的wince6.0，启动以后，不显示桌面，串口输出如下，大家是否遇到过这样的问题？
WinCE 6.0 Steploader for TQ2416
Microsoft Windows CE Bootloader Common Library Version 1.4 Built Sep 15 2012 15:38:06
Microsoft Windows CE Bootloader for the EmbedSky TQ2416 Version 2.4 Built Sep 15 2012
Press to launch image stored on boot media, or to enter boot monitor.
Initiating image launch in 0 seconds.
Launching image from boot media ...
OEMPlatformInit: IMAGE_TYPE_RAMIMAGE
INFO: Using static IP address 121816.
INFO: Using subnet mask 2525250.
waitforconnect
INFO: using TOC dwJumpAddress: 0x80205ec0
INFO: OEMLaunch: Jumping to Physical Address 0x30205EC0h (Virtual Address 0x80205EC0h)...
Windows CE Kernel for ARM (Thumb Enabled) Built on Sep 14 2011 at 17:32:03
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb
DDRRAM capacity is 64MB
DCache: 128 sets, 4 ways, 32 line size, 16384 size
ICache: 128 sets, 4 ways, 32 line size, 16384 size
FCLK:400000000, HCLK:133333333, PCLK:66666666
Arguments area has some values
-OEMInit
FMD_OEMIoControl: IOCTL_FMD_GET_INTERFACE
FMD_OEMIoControl: unrecognized IOCTL (0x71c24).
OEM: Not clearing storage
OEM: Not cleaning system hive
OEM: Not cleaning user profiles
OEM: Not cleaning system hive
DEBUG: CreateSerialObject 0
启动一半就死了，lz要追查代码找原因吧 问题是我没有改动任何东西，你们光盘里面的代码编译完了 下载好了 就这样{:2_135:} qidaimengxing 发表于 2013-8-27 15:34 static/image/common/back.gif
问题是我没有改动任何东西，你们光盘里面的代码编译完了 下载好了 就这样
http://www.armbbs.net/forum.php?mod=viewthread&tid=16445
页:
[1]