wince 挂起唤不醒
最近在做6410（wince6.0）下应用程序，发现个问题是程序打开关闭后，再次打开，挂起成功但无法唤醒，不打开程序挂起，唤醒都成功。正常挂起唤醒：
MFC] Sleep! (NumOfInstance=0)
ufsdio_power_off()
GPIO_Control: GPIO_PowerDown
WAV_PowerDown
++OEMPowerOff(--BSPPowerOn()
--OEMPowerOff()WAV_PowerUp
Power Up the HSMMC Host Controller
Power Up the HSMMC Host Controller
GPIO_Control: GPIO_PowerUp
UsbFnMdd!UfnMdd_Notify: Ignoring notification 0x00000001 - 0x00000000 from PDD
SDHCControllerIst - Card is Inserted!
SDHCControllerIst - Card is Removed!
DSK_PowerUp: FTL_ReadReclaim
DSK_PowerUp: FTL_ReadReclaim
WakeUP! (NumOfInstance=0)
KeyValue=80
Key all up
WakeUp Source = 0xffffffff
ufsdio_power_off()
ufsdio_unload()
ufsdio_load( Drivers\Active\77 )
。。。。。。。。。。。。
唤醒失败：
Sleep! (NumOfInstance=0)
ufsdio_power_off()
GPIO_Control: GPIO_PowerDown
WAV_PowerDown
++OEMPowerOff(--BSPPowerOn()
--OEMPowerOff()WAV_PowerUp
Power Up the HSMMC Host Controller
Power Up the HSMMC Host Controller
GPIO_Control: GPIO_PowerUp
UsbFnMdd!UfnMdd_Notify: Ignoring notification 0x00000001 - 0x00000000 from PDD
SDHCControllerIst - Card is Inserted!
SDHCControllerIst - Card is Removed!
就卡住了 可能有的程序会影响休眠唤醒吧。我们开发板中提供的休眠唤醒功能仅供参考，如果要产品级别的，还需要进一步调试。
页:
[1]