dariush_abbasi 发表于 2014-4-25 21:26:24

How to change the WINCE for VGA Output?

Hi.
I want to change the file but i can't find it in "C:\WINCE600\PLATFORM\COMMON\SRC\SOC\S5PV210_SEC_V1\OAL\INC" PATH , i can just find the file "lcd_params.h" in "C:\WINCE600\PLATFORM\E8\SRC\INC" and i changed it to"#define LCD_DEFAULT_MODULE    (LCD_MODULE_VGA800600)" but after compilation makes no difference!
Would you please tell me where should be modified?

dariush_abbasi 发表于 2014-4-25 23:15:59

本帖最后由 dariush_abbasi 于 2014-4-25 23:55 编辑

Is it enough to Change the "NK.bin" or the "bootimage.nb0" Also must be changed in Order to Take Effect When changing the "bootimage.nb0" the following Error happens:? ERROR: OALVAtoPA: invalid virtual address 0x00000000 Thanks.


dariush_abbasi 发表于 2014-4-26 16:36:59

本帖最后由 dariush_abbasi 于 2014-4-26 19:01 编辑

Is "bootimage.nb0" responsible for display output type OR u-boot_E8_CE_20131228 OR ....?What is the default WINCE ip address?

dariush_abbasi 发表于 2014-4-28 21:28:18

Hi.
Dose E8 's BSP really support VGA or HDMI???{:2_135:}

RTPrope 发表于 2021-9-14 12:26:00

-

Hi,

with or without extension card, what should one get to display the video output of a Zero on a VGA display?
I thought of using a jack to female rca cable, but then... I have not found a cable from rca to vga, but found some boxes that seem to be able to convert the signal.

Thanks.
页: [1]
查看完整版本: How to change the WINCE for VGA Output?