fengc234 发表于 2014-4-29 15:38:54

系统奔溃了

系统突然出现这样的报错
CPSW phy found : id is : 0x7c0f1
PHY 0:01 not found
ADDRCONF(NETDEV_UP): eth0: link is not ready
PHY: 0:00 - Link is Up - 100/Full
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IP-Config: Complete:
   device=eth0, addr=192.168.9.250, mask=255.255.255.0, gw=192.168.9.250,
   host=www, domain=, nis-domain=embedsky.net,
   bootserver=192.168.9.93, rootserver=192.168.9.93, rootpath=
VFS: Mounted root (nfs filesystem) on device 0:14.
Freeing init memory: 248K
Failed to execute /init.Attempting defaults...
can not open device: No such file or directory
Kernel panic - not syncing: Attempted to kill init!
Backtrace:
[<c00181e0>] (dump_backtrace+0x0/0x10c) from [<c05ada10>] (dump_stack+0x18/0x1c)
r7:df82bc00 r6:c08156c8 r5:c084d650 r4:c084d650
[<c05ad9f8>] (dump_stack+0x0/0x1c) from [<c05ada78>] (panic+0x64/0x198)
[<c05ada14>] (panic+0x0/0x198) from [<c003fb5c>] (do_exit+0x680/0x69c)
r3:df82bd24 r2:df82df28 r1:df82df64 r0:c070c490
[<c003f4dc>] (do_exit+0x0/0x69c) from [<c003fbc8>] (do_group_exit+0x50/0xac)
[<c003fb78>] (do_group_exit+0x0/0xac) from [<c003fc3c>] (sys_exit_group+0x18/0x20)
r5:40288774 r4:00000001
[<c003fc24>] (sys_exit_group+0x0/0x20) from [<c0014340>] (ret_fast_syscall+0x0/0x30)
eth0: no IPv6 routers present
请问有谁知道吗?

fengc234 发表于 2014-4-29 18:13:34

在IP-Config: Complete:
   device=eth0, addr=192.168.9.250, mask=255.255.255.0, gw=192.168.9.250,中,gw感觉不对,我的网关是192.168.9.1,为啥会成这个的呢?如何设置?
页: [1]
查看完整版本: 系统奔溃了