210 v4 SD卡更新遇见问题求大神
本帖最后由 迷迷糊糊 于 2014-12-18 10:22 编辑</blockquote></div><blockquote>
系统为LinuxEmbedSky.ini文件如下：#### This is TQ210 SD config files ####
operating condition=install
OS Type=Linux
LED indicator=on
Beep=on
#### Others ####
bootloader=
LOGO=
#### Others end ####
#### Linux ####
kernel=
rootfs=images\Linux\root.bin
#### Linux end ####
#### Windows CE ####
NK=
#### Windows CE end ####
#### Android ####
kernel=
rootfs=
#### Android end ####
#### uCOS-II ####
uCOS-II Image=
#### uCOS-II end ####
#### User Application ####
Application Image=
#### User Application end #####
我只更新root.bin，自动更新。拨位开关正确，串口信息如下：##### EmbedSky BIOS for SKY210/TQ210 #####
This Board: SDRAM is 1024MB; LCD display size is: 800X600
Hit any key to stop autoboot:0
SD and FAT initialize success!
file length is 0x1fe.
LineCount=30
condition=INSTALL
OSType=LINUX
beep state=ON
bootloader=
Don't need to download bootloader
logodir=
Don't need to download logo image.
Linux zImage=images\Linux\root.bin
file length is 0x6b04b40.
NAND erase: device 0 offset 0x500000, size 0x500000
Erasing at 0x9e0000 -- 100% complete.
OK
NAND write: device 0 offset 0x500000, size 0x500000
Writing data at 0x9ff800 -- 100% complete.
5242880 bytes written: OK
Linux rootfs=
Don't need to download Linux rootfs
Start Linux ......
NAND read: device 0 offset 0x500000, size 0x500000
5242880 bytes read: OK
get_format
-------- 0 --------
Wrong Image Format for bootm command
ERROR: can't get kernel image!
##### Boot for TQ210 Main Menu#####
##### EmbedSky USB download mode #####
Download bootloader (u-boot or bootimage) to Nand Flash
Download WinCE NK image (NK.bin) to Nand Flash
Download Linux Kernel (zImage.bin) to Nand Flash
Download LOGO Picture (logo.bin) to NandFlash
Download UBIFS image (root.ubi) to Nand Flash
Download YAFFS image (root.bin) to Nand Flash
Download Program to SDRAM and Run it
Boot the system
Format the Nand Flash
Set the boot parameters
Download User Program
Enter TFTP download mode menu
Reboot u-boot
Test Linux Image (zImage)
] Download bootloader to SD Card
Enter your selection:
问题来了：
为什么出错。谢谢！！
沙了个发。谢谢！{:5_330:}{:5_330:}{:5_330:} 你那ini文件肯定改动过空行了；你直接从光盘拿过一个ini文件，然后改“=”那些就好，不要随便删除空行 Calvin 发表于 2014-12-18 13:44
你那ini文件肯定改动过空行了；你直接从光盘拿过一个ini文件，然后改“=”那些就好，不要随便删除空行
我重新拷贝了，结果还是这样。
ini文件为：
串口信息为：
##### EmbedSky BIOS for SKY210/TQ210 #####
This Board: SDRAM is 1024MB; LCD display size is: 800X600
Hit any key to stop autoboot:0
SD and FAT initialize success!
file length is 0x200.
condition=INSTALL
OSType=LINUX
beep state=ON
bootloader=
Don't need to download bootloader
logodir=
Don't need to download logo image.
Linux zImage=
Don't need to download Linux zImage
Linux rootfs=images\Linux\root.bin
NAND erase: device 0 offset 0xa00000, size 0x3f600000
Erasing at 0x3ffe0000 -- 100% complete.
OK
NAND write: device 0 offset 0xa00000
Writing data at 0x71c6000 -- 100% complete.
112216896 bytes written: OK
Saving Environment to NAND...
Erasing Nand...
Erasing at 0x100000 -- 100% complete.
Writing to Nand... done
Start Linux ......
NAND read: device 0 offset 0x500000, size 0x500000
5242880 bytes read: OK
get_format
-------- 0 --------
Wrong Image Format for bootm command
ERROR: can't get kernel image!
##### Boot for TQ210 Main Menu#####
##### EmbedSky USB download mode #####
Download bootloader (u-boot or bootimage) to Nand Flash
Download WinCE NK image (NK.bin) to Nand Flash
Download Linux Kernel (zImage.bin) to Nand Flash
Download LOGO Picture (logo.bin) to NandFlash
Download UBIFS image (root.ubi) to Nand Flash
Download YAFFS image (root.bin) to Nand Flash
Download Program to SDRAM and Run it
Boot the system
Format the Nand Flash
Set the boot parameters
Download User Program
Enter TFTP download mode menu
Reboot u-boot
Test Linux Image (zImage)
] Download bootloader to SD Card
Enter your selection: 迷迷糊糊 发表于 2014-12-18 14:26
我重新拷贝了，结果还是这样。
ini文件为：
{:5_348:}你看信息嘛 这是正常的，你再烧一次内核就好了 不懂！！！！！
页:
[1]