SD卡启动问题
##### EmbedSky BIOS for SKY210/TQ210 #####This Board: SDRAM is 1024MB; LCD display size is: 800X480
Hit any key to stop autoboot:0
SD and FAT initialize success!
file length is 0x23a.
LineCount=32
condition=INSTALL
OSType=ANDROID
beep state=ON
bootloader=u-boot.bin
file length is 0x6c000.
NAND erase: device 0 offset 0x0, size 0x100000
Erasing at 0xe0000 -- 100% complete.
OK
NAND write: device 0 offset 0x0, size 0x6c000
Main area read (4 blocks):
Checksum is calculated.
Main area write (4 blocks):
524288 bytes written: OK
logodir=images\logo.bin
file length is 0x1d4c00.
NAND erase: device 0 offset 0x200000, size 0x300000
Erasing at 0x4e0000 -- 100% complete.
OK
NAND write: device 0 offset 0x200000, size 0x1d4c00
Writing data at 0x3d4800 -- 100% complete.
1920000 bytes written: OK
Android zImage=images\android\zImage.bin
file length is 0x4d6ea4.
NAND erase: device 0 offset 0x500000, size 0x500000
Erasing at 0x9e0000 -- 100% complete.
OK
NAND write: device 0 offset 0x500000, size 0x4d6ea4
Writing data at 0x9d6800 -- 100% complete.
5074596 bytes written: OK
Android rootfs=images\android\rootfs.bin
NAND erase: device 0 offset 0xa00000, size 0x3f600000
Skipping bad block at0x07ca0000
Skipping bad block at0x154e0000
Erasing at 0x3ffe0000 -- 100% complete.
OK
NAND write: device 0 offset 0xa00000
Bad block at 0x7ca0000 in erase block from 0x7ca0000 will be skipped
Writing data at 0xa3c2800 -- 100% complete.
166134144 bytes written: OK
Saving Environment to NAND...
Erasing Nand...
Erasing at 0x100000 -- 100% complete.
Writing to Nand... done
NAND read: device 0 offset 0x500000, size 0x500000
5242880 bytes read: OK
Boot with zImage
Starting kernel ...
然后就一直停在这, 用其它 方式烧同样的镜像,能不能启动? TQ-ZQL 发表于 2015-1-4 16:31
用其它 方式烧同样的镜像,能不能启动?
用USB可以正常启动 TQ-ZQL 发表于 2015-1-4 16:31
用其它 方式烧同样的镜像,能不能启动?
还有我从tftp下载,ping不通,你们提供的uboot里面是不是没有网卡驱动。
页:
[1]