Fcl-喜悦 发表于 2015-3-25 13:33:28

Wince6.0最新BSP问题

本帖最后由 Fcl-喜悦 于 2015-4-29 09:54 编辑

前几天收到你们的BSP包，重新编译后，发现打开NK调试信息后，系统无法启动，关闭NK调试信息后，系统启动正常。
Windows CE Kernel for ARM (Thumb Enabled) Built on Sep 25 2009 at 11:04:23
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb
DDRRAM capacity is 64MB
DCache: 128 sets, 4 ways, 32 line size, 16384 size
ICache: 128 sets, 4 ways, 32 line size, 16384 size
FCLK:400000000, HCLK:133333333, PCLK:66666666
Arguments area has some values
-OEMInit
FMD_OEMIoControl: IOCTL_FMD_GET_INTERFACE
FMD_OEMIoControl: unrecognized IOCTL (0x71c24).
OEM: Not clearing storage
OEM: Not cleaning system hive
OEM: Not cleaning user profiles
OEM: Not cleaning system hive
+OALIoCtlHalGetHWEntropy
DEBUG: CreateSerialObject 0
?
   鄍Windows CE Kernel for ARM (Thumb Enabled) Built on Sep 25 2009 at 11:04:23
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb
DDRRAM capacity is 64MB
DCache: 128 sets, 4 ways, 32 line size, 16384 size
ICache: 128 sets, 4 ways, 32 line size, 16384 size
FCLK:400000000, HCLK:133333333, PCLK:66666666
Arguments area has some values
-OEMInit
FMD_OEMIoControl: IOCTL_FMD_GET_INTERFACE
FMD_OEMIoControl: unrecognized IOCTL (0x71c24).
OEM: Not clearing storage
OEM: Not cleaning system hive
OEM: Not cleaning user profiles
OEM: Not cleaning system hive
+OALIoCtlHalGetHWEntropy
DEBUG: CreateSerialObject 0

======================================
就启动到    DEBUG: CreateSerialObject 0 这个位置就不走了。何原因？？？？？？？？？？？？？？？？？？

TQ-lkp 发表于 2015-3-25 15:27:14

是否是引起了死循环，串口0是调试串口会接收到其他的打印信息

Fcl-喜悦 发表于 2015-3-25 16:00:02

没有引起死循环，这条信息在CreateSerialObject（LPTSTR。。。。）这个函数里没啥问题啊。。。没有其他调试信息。
页: [1]
查看完整版本: Wince6.0最新BSP问题