求助。TQ210烧WinCE的NK一直失败
{:2_139:}{:2_139:}完全按照手册上做的。。然而就是做到烧NK的时候，结果不对T T
求助。。用的NK是光盘里给的。。
烧NK时的错误：
Download bootloader (u-boot or bootimage) to Nand Flash
Download WinCE NK image (NK.bin) to Nand Flash
Download Linux Kernel (zImage.bin) to Nand Flash
Download LOGO Picture (logo.bin) to NandFlash
Download UBIFS image (root.ubi) to Nand Flash
Download YAFFS image (root.bin) to Nand Flash
Download Program to SDRAM and Run it
Boot the system
Format the Nand Flash
Set the boot parameters
Download User Program
Enter TFTP download mode menu
Reboot u-boot
Test Linux Image (zImage)
Download bootloader to SD Card
Enter your selection: 2
OTG cable Connected!
Now, Waiting for DNW to transmit data
Now, Downloading
Please waiting ............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................Download Done!!
Download Address: 0x41000000, Download Filesize:0x3cce66c
Checksum is being calculated.............................................................Checksum O.K.
Found single BIN signature.
Image start is 0x80020000, length is 0x03d69a14
Relocate NK.bin, please wait .................................................................................................................................................................................................................................................................................................................. Done!
Saving NK to NandFlash......
Failed to find a supported NAND flash memory.
Manufacturer code : 0x58
Device code : 0x 1
### ERROR ### Please RESET the board ### 这种情况我也碰到过，我是用SD卡烧录的，“ Download bootloader (u-boot or bootimage) to Nand Flash”要选择“\TQ210_CD\出厂烧录镜像合集\WinCE镜像\bootimage\bootimage_A70_V1.5_20140828.nb0”就解决了，具体选择哪个bootimage，参考该路径下的readme.txt。{:5_294:}
页:
[1]