nand Flash 发出地址信号的疑惑？
#define GSTATUS1 (*(volatile unsigned int *)0x560000B0)#define BUSY 1
typedef unsigned int S3C24X0_REG32;
/* NAND FLASH (see S3C2410 manual chapter 6) */
typedef struct {
S3C24X0_REG32 NFCONF;
S3C24X0_REG32 NFCMD;
S3C24X0_REG32 NFADDR;
S3C24X0_REG32 NFDATA;
S3C24X0_REG32 NFSTAT;
S3C24X0_REG32 NFECC;
} S3C2410_NAND;
/* NAND FLASH (see S3C2440 manual chapter 6, www.100ask.net) */
typedef struct {
S3C24X0_REG32 NFCONF;
S3C24X0_REG32 NFCONT;
S3C24X0_REG32 NFCMD;
S3C24X0_REG32 NFADDR;
S3C24X0_REG32 NFDATA;
S3C24X0_REG32 NFMECCD0;
S3C24X0_REG32 NFMECCD1;
S3C24X0_REG32 NFSECCD;
S3C24X0_REG32 NFSTAT;
S3C24X0_REG32 NFESTAT0;
S3C24X0_REG32 NFESTAT1;
S3C24X0_REG32 NFMECC0;
S3C24X0_REG32 NFMECC1;
S3C24X0_REG32 NFSECC;
S3C24X0_REG32 NFSBLK;
S3C24X0_REG32 NFEBLK;
} S3C2440_NAND;
typedef struct {
void (*nand_reset)(void);
void (*wait_idle)(void);
void (*nand_select_chip)(void);
void (*nand_deselect_chip)(void);
void (*write_cmd)(int cmd);
void (*write_addr)(unsigned int addr);
unsigned char (*read_data)(void);
}t_nand_chip;
static S3C2410_NAND * s3c2410nand = (S3C2410_NAND *)0x4e000000;
static S3C2440_NAND * s3c2440nand = (S3C2440_NAND *)0x4e000000;
static t_nand_chip nand_chip;
/* 供外部调用的函数 */
void nand_init(void);
void nand_read(unsigned char *buf, unsigned long start_addr, int size);
/* NAND Flash操作的总入口, 它们将调用S3C2410或S3C2440的相应函数 */
static void nand_reset(void);
static void wait_idle(void);
static void nand_select_chip(void);
static void nand_deselect_chip(void);
static void write_cmd(int cmd);
static void write_addr(unsigned int addr);
static unsigned char read_data(void);
/* S3C2410的NAND Flash处理函数 */
static void s3c2410_nand_reset(void);
static void s3c2410_wait_idle(void);
static void s3c2410_nand_select_chip(void);
static void s3c2410_nand_deselect_chip(void);
static void s3c2410_write_cmd(int cmd);
static void s3c2410_write_addr(unsigned int addr);
static unsigned char s3c2410_read_data();
/* S3C2440的NAND Flash处理函数 */
static void s3c2440_nand_reset(void);
static void s3c2440_wait_idle(void);
static void s3c2440_nand_select_chip(void);
static void s3c2440_nand_deselect_chip(void);
static void s3c2440_write_cmd(int cmd);
static void s3c2440_write_addr(unsigned int addr);
static unsigned char s3c2440_read_data(void);
/* S3C2410的NAND Flash操作函数 */
/* 复位 */
static void s3c2410_nand_reset(void)
{
s3c2410_nand_select_chip();
s3c2410_write_cmd(0xff); // 复位命令
s3c2410_wait_idle();
s3c2410_nand_deselect_chip();
}
/* 等待NAND Flash就绪 */
static void s3c2410_wait_idle(void)
{
int i;
volatile unsigned char *p = (volatile unsigned char *)&s3c2410nand->NFSTAT;
while(!(*p & BUSY))
for(i=0; i<10; i++);
}
/* 发出片选信号 */
static void s3c2410_nand_select_chip(void)
{
int i;
s3c2410nand->NFCONF &= ~(1<<11);
for(i=0; i<10; i++);
}
/* 取消片选信号 */
static void s3c2410_nand_deselect_chip(void)
{
s3c2410nand->NFCONF |= (1<<11);
}
/* 发出命令 */
static void s3c2410_write_cmd(int cmd)
{
volatile unsigned char *p = (volatile unsigned char *)&s3c2410nand->NFCMD;
*p = cmd;
}
/* 发出地址 */
static void s3c2410_write_addr(unsigned int addr)
{
int i;
volatile unsigned char *p = (volatile unsigned char *)&s3c2410nand->NFADDR;
*p = addr & 0xff;
for(i=0; i<10; i++);
*p = (addr >> 9) & 0xff;
for(i=0; i<10; i++);
*p = (addr >> 17) & 0xff;
for(i=0; i<10; i++);
*p = (addr >> 25) & 0xff;
for(i=0; i<10; i++);
}
/* 读取数据 */
static unsigned char s3c2410_read_data(void)
{
volatile unsigned char *p = (volatile unsigned char *)&s3c2410nand->NFDATA;
return *p;
}
/* 在第一次使用NAND Flash前，复位一下NAND Flash */
static void nand_reset(void)
{
nand_chip.nand_reset();
}
static void wait_idle(void)
{
nand_chip.wait_idle();
}
static void nand_select_chip(void)
{
int i;
nand_chip.nand_select_chip();
for(i=0; i<10; i++);
}
static void nand_deselect_chip(void)
{
nand_chip.nand_deselect_chip();
}
static void write_cmd(int cmd)
{
nand_chip.write_cmd(cmd);
}
static void write_addr(unsigned int addr)
{
nand_chip.write_addr(addr);
}
static unsigned char read_data(void)
{
return nand_chip.read_data();
}
/* 初始化NAND Flash */
void nand_init(void)
{
#define TACLS 0
#define TWRPH0 3
#define TWRPH1 0
/* 判断是S3C2410还是S3C2440 */
if ((GSTATUS1 == 0x32410000) || (GSTATUS1 == 0x32410002))
{
nand_chip.nand_reset = s3c2410_nand_reset;
nand_chip.wait_idle = s3c2410_wait_idle;
nand_chip.nand_select_chip = s3c2410_nand_select_chip;
nand_chip.nand_deselect_chip = s3c2410_nand_deselect_chip;
nand_chip.write_cmd = s3c2410_write_cmd;
nand_chip.write_addr = s3c2410_write_addr;
nand_chip.read_data = s3c2410_read_data;
/* 使能NAND Flash控制器, 初始化ECC, 禁止片选, 设置时序 */
s3c2410nand->NFCONF = (1<<15)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0);
}
else
{
nand_chip.nand_reset = s3c2440_nand_reset;
nand_chip.wait_idle = s3c2440_wait_idle;
nand_chip.nand_select_chip = s3c2440_nand_select_chip;
nand_chip.nand_deselect_chip = s3c2440_nand_deselect_chip;
nand_chip.write_cmd = s3c2440_write_cmd;
nand_chip.write_addr = s3c2440_write_addr;
nand_chip.read_data = s3c2440_read_data;
/* 设置时序 */
s3c2440nand->NFCONF = (TACLS<<12)|(TWRPH0<<8)|(TWRPH1<<4);
/* 使能NAND Flash控制器, 初始化ECC, 禁止片选 */
s3c2440nand->NFCONT = (1<<4)|(1<<1)|(1<<0);
}
/* 复位NAND Flash */
nand_reset();
}
#define NAND_SECTOR_SIZE 512
#define NAND_BLOCK_MASK (NAND_SECTOR_SIZE - 1)
/* 读函数 */
void nand_read(unsigned char *buf, unsigned long start_addr, int size)
{
int i, j;
if ((start_addr & NAND_BLOCK_MASK) || (size & NAND_BLOCK_MASK)) {
return ; /* 地址或长度不对齐 */
}
/* 选中芯片 */
nand_select_chip();
for(i=start_addr; i < (start_addr + size);) {
/* 发出READ0命令 */
write_cmd(0);
/* Write Address */
write_addr(i);
wait_idle();
for(j=0; j < NAND_SECTOR_SIZE; j++, i++) {
*buf = read_data();
buf++;
}
}
/* 取消片选信号 */
nand_deselect_chip();
return ;
}
为什么写地址的时候要循环呢？ 主要是这段代码不懂：
static void s3c2410_write_addr(unsigned int addr)
{
int i;
volatile unsigned char *p = (volatile unsigned char *)&s3c2410nand->NFADDR;
*p = addr & 0xff;
for(i=0; i<10; i++);
*p = (addr >> 9) & 0xff;
for(i=0; i<10; i++);
*p = (addr >> 17) & 0xff;
for(i=0; i<10; i++);
*p = (addr >> 25) & 0xff;
for(i=0; i<10; i++);
}
我知道nand Flash 的地址分为A0~A7A9~A16 A17~A24 A25对应于 半页 block Flash的位置，但是就不知道为什么地址要右移位。第一次： *p = addr & 0xff;保留地址的低8位，第二次
*p = (addr >> 9) & 0xff; 并通过右移保存了A9~A16位，这样的话，都保存到P指向的寄存器中，那么第一次保存的低8位的地址不是被覆盖了吗？
注：本代码是韦东山的“嵌入式Linux应用开发完全手册”第8章关于nand Flash的控制操作这一章的代码 nand flash的芯片手册告诉我们，操作nand时要先传输命令，再传输地址。而地址是用4个或5个周期完成的(这得看具体芯片的手册)，每个周期传输一个地址序列。 哎，你还不了解啥就串行发送数据吧呵呵 :):):D:D解啥就串行发送数据吧呵呵
页:
[1]