<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>天嵌 ARM开发社区 - Linux</title>
    <link>http://www.armbbs.net/forum.php?mod=forumdisplay&amp;fid=128</link>
    <description>Latest 20 threads of Linux</description>
    <copyright>Copyright(C) 天嵌 ARM开发社区</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Sat, 13 Jun 2026 22:10:27 +0000</lastBuildDate>
    <ttl>120</ttl>
    <image>
      <url>http://www.armbbs.net/static/image/common/logo_88_31.gif</url>
      <title>天嵌 ARM开发社区</title>
      <link>http://www.armbbs.net/</link>
    </image>
    <item>
      <title>2416大于4g的u盘在dev下不显示</title>
      <link>http://www.armbbs.net/forum.php?mod=viewthread&amp;tid=23257</link>
      <description><![CDATA[2416大于4g的u盘在dev下不显示，小于4g的都能正常，dev下有sda]]></description>
      <category>Linux</category>
      <author>jjjcmxz</author>
      <pubDate>Tue, 30 Oct 2018 08:38:06 +0000</pubDate>
    </item>
    <item>
      <title>我们买了你们的TQ2416，但是系统运行一段时间后ls等命令出现了段错误。</title>
      <link>http://www.armbbs.net/forum.php?mod=viewthread&amp;tid=23170</link>
      <description><![CDATA[]]></description>
      <category>Linux</category>
      <author>hexinjun</author>
      <pubDate>Tue, 19 Jun 2018 06:37:13 +0000</pubDate>
    </item>
    <item>
      <title>S3C2416开发板，用SD卡不能烧写UBOOT</title>
      <link>http://www.armbbs.net/forum.php?mod=viewthread&amp;tid=23007</link>
      <description><![CDATA[S3C2416开发板，把u-boot_movi_64MB_V1.4.bn，用EmbedSky卡制作工具V2.1.0制作到SD卡中, SD卡烧写UBOOT，重启显示屏显示天嵌logo,  重启时按空格键SecureCRT 7.1（设置波特率115200，PC与开发板用原配串口线联接好）没有任何信息输出，这个问题如何解决？部分截图如下。 ...]]></description>
      <category>Linux</category>
      <author>insect</author>
      <pubDate>Wed, 14 Mar 2018 01:21:07 +0000</pubDate>
    </item>
    <item>
      <title>SD卡启动失败</title>
      <link>http://www.armbbs.net/forum.php?mod=viewthread&amp;tid=22973</link>
      <description><![CDATA[采用了一张8G的SD卡，制作了一张sd启动卡，提示制作成功。
但是开发板选择SD开启，没有任何反应，液晶屏是黑色的，串口没有信息输出，按空格键了，也尝试了回车，都没反应。]]></description>
      <category>Linux</category>
      <author>学者</author>
      <pubDate>Thu, 01 Feb 2018 11:21:05 +0000</pubDate>
    </item>
    <item>
      <title>nfs使能问题</title>
      <link>http://www.armbbs.net/forum.php?mod=viewthread&amp;tid=22910</link>
      <description><![CDATA[Fedor10下的NFS已经配置通过了，和开发板也可以正常挂载。
但是服务配置里面的nfs不让启用，点击启用按钮没有反应，一直都是红色。]]></description>
      <category>Linux</category>
      <author>学者</author>
      <pubDate>Mon, 29 Jan 2018 11:19:35 +0000</pubDate>
    </item>
    <item>
      <title>2416 的USB device 可以改为HOST用吗</title>
      <link>http://www.armbbs.net/forum.php?mod=viewthread&amp;tid=22462</link>
      <description><![CDATA[2416 的USB device 可以改为HOST用吗]]></description>
      <category>Linux</category>
      <author>qqqno1</author>
      <pubDate>Wed, 20 Sep 2017 08:50:01 +0000</pubDate>
    </item>
    <item>
      <title>TQ2416提供的uboot源码的.module是什么类型文件</title>
      <link>http://www.armbbs.net/forum.php?mod=viewthread&amp;tid=22230</link>
      <description><![CDATA[TQ2416提供的uboot源码的.module是什么类型文件，比如CPU/S3C24XX目录下，我看到一个mmu_table.module和mmu_table.c文件，现在我要修改一个地方，正好它在mmu_table.c，但是修改了后，下载进去没变化，是不是编译UBOOT时候是用到mmu_table.module，并且mmu_table.module ...]]></description>
      <category>Linux</category>
      <author>xcm19880720</author>
      <pubDate>Thu, 01 Jun 2017 08:37:25 +0000</pubDate>
    </item>
    <item>
      <title>IROM的nand启动和普通nand启动</title>
      <link>http://www.armbbs.net/forum.php?mod=viewthread&amp;tid=22215</link>
      <description><![CDATA[关于IROM的nand启动和普通nand启动：TQ2416它的SD卡烧写系统到nand，然后从nand启动，看原理图，他是对OM4-1进行配置（主要是OM3，OM4），这种事普通方式的nand。如果我采用irom模式的nand启动（这种方式是0M4-0是固定，通过GPC5-7脚来选择SD还是NAND),则SD卡烧写后，从 ...]]></description>
      <category>Linux</category>
      <author>xcm19880720</author>
      <pubDate>Wed, 24 May 2017 02:10:13 +0000</pubDate>
    </item>
    <item>
      <title>急！急！急！如何修改TQ2416的UBOOT中SD卡自动烧录的分区地址？</title>
      <link>http://www.armbbs.net/forum.php?mod=viewthread&amp;tid=22163</link>
      <description><![CDATA[最近需要研究TQ2416的u-boot-2009.11_TQ2416在SD卡自动烧录模式，发现TQ2416配套资料上的u-boot-2009.11_TQ2416_V1.4源码并不是全部开放，
关于UBOOT中的SD卡自动烧录、以及FAT文件系统的代码，一点都没有开放出来，很多东西想改一下都不行。

目前TQ2416的UBOOT的SD卡 ...]]></description>
      <category>Linux</category>
      <author>hunhunzi</author>
      <pubDate>Sun, 30 Apr 2017 15:05:22 +0000</pubDate>
    </item>
    <item>
      <title>TQ2416使用fatload命令出错，基于u-boot-2009.11_TQ2416_V1.4</title>
      <link>http://www.armbbs.net/forum.php?mod=viewthread&amp;tid=22130</link>
      <description><![CDATA[在TQ2416下执行fatload出错了，UBOOT版本是u-boot-2009.11_TQ2416_V1.4。

TQ2416 # fatload mmc 0 0xc0000000 zImage.bin

** Unable to use mmc 0:1 for fatload **

可以确定SD卡是插着的，也可以自动从SD卡下载LINUX系统，但是单独执行fatload就不行，错误如上面所 ...]]></description>
      <category>Linux</category>
      <author>hunhunzi</author>
      <pubDate>Tue, 18 Apr 2017 13:51:02 +0000</pubDate>
    </item>
    <item>
      <title>u-boot-2009.11_TQ2416_V1.4如何修改从SD卡烧写到NAND的地址</title>
      <link>http://www.armbbs.net/forum.php?mod=viewthread&amp;tid=22115</link>
      <description><![CDATA[TQ2416的开发板，UBOOT代码是u-boot-2009.11_TQ2416_V1.4，发现UBOOT的源码把从SD卡烧写镜像的地址都写死了，代码不开放，串口LOG显示写死的烧写地址如下：
0x000000-0x100000 : \&quot;uboot\&quot;
0x300000-0x700000 : \&quot;zImage\&quot;
0x700000-END : \&quot;rootfs\&quot;
请问如果我想修改zImage ...]]></description>
      <category>Linux</category>
      <author>hunhunzi</author>
      <pubDate>Mon, 17 Apr 2017 03:20:09 +0000</pubDate>
    </item>
    <item>
      <title>SPI驱动移植问题</title>
      <link>http://www.armbbs.net/forum.php?mod=viewthread&amp;tid=21970</link>
      <description><![CDATA[TQ2416移植SPI驱动时，显示
s3c2416-spi s3c2416-spi.0:No clock for device
s3c2416-spi :probe of s3c2416-spi.0 failed with error -2]]></description>
      <category>Linux</category>
      <author>fenglcheng</author>
      <pubDate>Tue, 13 Dec 2016 06:19:23 +0000</pubDate>
    </item>
    <item>
      <title>TQ2416的IO口部分不能输出控制</title>
      <link>http://www.armbbs.net/forum.php?mod=viewthread&amp;tid=21432</link>
      <description><![CDATA[现我想将2416开发底板上的camera接口上的口线作为普通IO口使用，在你们的使用手册里面也有讲到在2416的板子上无摄像头功能，均为普通IO，我在tq2416_leds.c和regs-gpio.h文件中分别做了修改，修改如下tq2416_leds.c文件内进行了一些添加
static unsigned long gpio_tabl ...]]></description>
      <category>Linux</category>
      <author>0backspace0</author>
      <pubDate>Tue, 22 Dec 2015 16:03:19 +0000</pubDate>
    </item>
    <item>
      <title>异步通知</title>
      <link>http://www.armbbs.net/forum.php?mod=viewthread&amp;tid=21317</link>
      <description><![CDATA[按键驱动程序使用中断的方式 来产生异步事件   只能产生中断不能产生异步事件  应该怎么办？]]></description>
      <category>Linux</category>
      <author>逝水无反</author>
      <pubDate>Thu, 08 Oct 2015 10:49:22 +0000</pubDate>
    </item>
    <item>
      <title>内核模块如何编译</title>
      <link>http://www.armbbs.net/forum.php?mod=viewthread&amp;tid=21270</link>
      <description><![CDATA[使用2416开发板 自带的 内核源码 编译内核模块 出现如下错误时什么原因？Makefile 文件如图]]></description>
      <category>Linux</category>
      <author>逝水无反</author>
      <pubDate>Sun, 13 Sep 2015 14:32:53 +0000</pubDate>
    </item>
    <item>
      <title>音频问题</title>
      <link>http://www.armbbs.net/forum.php?mod=viewthread&amp;tid=21241</link>
      <description><![CDATA[我们使用话音模块时，发现需要每50包话音数据丢弃一包话音数据，否则，话音延时会逐渐加大，请有相关经验的人指教。]]></description>
      <category>Linux</category>
      <author>fenglcheng</author>
      <pubDate>Fri, 21 Aug 2015 07:33:58 +0000</pubDate>
    </item>
    <item>
      <title>TQ2416 LCD驱动</title>
      <link>http://www.armbbs.net/forum.php?mod=viewthread&amp;tid=21016</link>
      <description><![CDATA[公司用的TQ2416的核心板 + 7寸屏，但是显示屏的逐行扫描的效果很明显（显示一帧画面有明显的下拉动作），网上搜了些资料说是用framebuffer的双缓冲，但我发现天嵌TQ2416 的LCD部分直接做成了一个tq2416.module，不知道为什么 ，或者开嵌能不能提供一个上述问题的解决办 ...]]></description>
      <category>Linux</category>
      <author>扫帚菜～～</author>
      <pubDate>Tue, 12 May 2015 05:30:58 +0000</pubDate>
    </item>
    <item>
      <title>触摸屏响应问题</title>
      <link>http://www.armbbs.net/forum.php?mod=viewthread&amp;tid=21001</link>
      <description><![CDATA[最近用TQ2416 128M核心板+10.4寸屏开发，发现触摸屏响应速度不好，而且快的话，软键盘经常出现按A键，结果B键触发的情况，不知有何解决方法？]]></description>
      <category>Linux</category>
      <author>yydkknd911</author>
      <pubDate>Thu, 07 May 2015 13:04:17 +0000</pubDate>
    </item>
    <item>
      <title>触摸屏为什么会莫名其妙死机了</title>
      <link>http://www.armbbs.net/forum.php?mod=viewthread&amp;tid=20770</link>
      <description><![CDATA[用着，用着，触摸屏会偶尔不能触摸了]]></description>
      <category>Linux</category>
      <author>linlideyu</author>
      <pubDate>Sat, 07 Feb 2015 07:31:32 +0000</pubDate>
    </item>
    <item>
      <title>2416 SPI驱动移植</title>
      <link>http://www.armbbs.net/forum.php?mod=viewthread&amp;tid=20764</link>
      <description><![CDATA[使用天嵌2416开发板的BSP中的kernel 3.1在做SPI移植时遇到这样的问题，求指教
1、内核配置支持SPI
2、修   linux-3.1-kernel/arch/arm/mach-s3c2416/mach-tq2416.c
添加了 
69 #include 
 70 #include 
 71 
 72 static struct spi_board_info s3c2410_spi0_board[] = { ...]]></description>
      <category>Linux</category>
      <author>lihx</author>
      <pubDate>Tue, 03 Feb 2015 06:49:09 +0000</pubDate>
    </item>
  </channel>
</rss>