TQ210的交叉工具链的安装有点问题

我这里安装的ubuntu12.04的64位的系统，安装完之后，在终端输入gcc -v
如下
安装交叉编译器但是输入arm-linxu-gcc -v之后安装成功

运行下脚本会自动安装的，有问题吗？

我是运行了这个ubuntu_env_install。sh的脚本 然后配置/etc/envonment下的文本，但是不能识别arm-linux-gcc -v命令

那个是修改gcc的吧，要装arm－linux－gcc还是要像以前那样，解压4.4.6_TQ210_release_20120720.tar.bz2，修改/etc/envonment（改这个envonment要小心，改错了有可能会使你系统都进不了）

好像论坛没办法发图片？

我将开发板的光盘里面的给的出厂映像文件烧录到开发板上但是屏幕是白屏  开发板可以可以启动的
android_usb gadget: high speed config #1: Android Composite
android_usb gadget: common->fsg is NULL in fsg_setup at 606
android_usb gadget: common->fsg is NULL in fsg_setup at 606
android_usb gadget: common->fsg is NULL in fsg_setup at 606
android_usb gadget: high speed config #1: Android Composite
android_usb gadget: high speed config #1: Android Composite
android_usb gadget: high speed config #1: Android Composite
android_usb gadget: high speed config #1: Android Composite
hub 1-0:1.0: over-current change on port 1
android_usb gadget: high speed config #1: Android Composite
VFS: Mounted root (yaffs2 filesystem) on device 31:3.
Freeing init memory: 188K
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
wm8960 0-001a: Failed to issue reset
wm8960: probe of 0-001a failed with error -5
DAI WM8960 not registered
input: Android Temperature Sensor as /devices/virtual/input/input4
rtusb init rt2870 --->
usbcore: registered new interface driver rt2870
smdkc110-rtc smdkc110-rtc: rtc disabled, re-enabling
Try to bring net interface up ...
sh: 1: unknown operand
ifconfig eth0 hw ether 10:23:45:67:89:ab
eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
ifconfig eth0 192.168.1.6 netmask 255.255.255.0 up
add default gw 192.168.1.2
Done
[05/Jan/1970:10:57:14 +0000] boa: server version Boa/0.94.13
[05/Jan/1970:10:57:14 +0000] boa: server built Jun  5 2012 at 15:18:10.
[05/Jan/1970:10:57:14 +0000] boa: starting server pid=96, port 80
Start Qt4 PDA

Please press Enter to activate this console.
[root@EmbedSky /]#
[root@EmbedSky /]#
[root@EmbedSky /]#
[root@EmbedSky /]#
[root@EmbedSky /]#

烧写的7寸电容屏 linux的映像文件

搞定 原来是的我之前拔下来过核心板没插紧