linux2.6内核编译后烧写，跑起来出错

将android烧成2.3版本的，然后尝试用linux源码包下的2..35.7的内核进行调试。步骤如下：
make defconfig tq210_defconfig
make zImage
烧到板子里后，错误Log如下： 此外，安卓系统可以启动，串口可以使用，但触摸屏无效，无法正常调试
[    3.283402] hub 1-1:1.0: 4 ports detected
[    3.932982] mmc3: new SDIO card at address 0001
[    6.974694] VFS: Mounted root (yaffs2 filesystem) on device 31:3.
[    6.974813] Freeing init memory: 200K
[    7.916785] rt5370sta: Unknown symbol __tracepoint_module_get (err 0)
[    8.172857] init: cannot find '/system/bin/vchanneld', disabling 'vchanneld-daemon'
[    8.406312] libertas: e0:2a:82:73:cf:da, fw 9.70.3p24, cap 0x00000303
[    8.429843] libertas: wlan0: Marvell WLAN 802.11 adapter
sh: can't access tty; job control turned off
# [    9.002407] Enabled => usb_mass_storage
[    9.002449] Enabled => adb
[    9.625927] wm8960: Unknown symbol kmem_cache_alloc_notrace (err 0)
[    9.674662] wm8960: Unknown symbol __tracepoint_kmalloc (err 0)
[    9.721594] warning: `rild' uses 32-bit capabilities (legacy support in use)
[    9.890188] s5pv210_hdmi: Unknown symbol soc_codec_dev_wm8960 (err 0)
[    9.892327] s5pv210_hdmi: Unknown symbol wm8960_dai (err 0)
[   10.167917] ds18b20: Unknown symbol input_allocate_polled_device (err 0)
[   10.168248] ds18b20: Unknown symbol input_free_polled_device (err 0)
[   10.168825] ds18b20: Unknown symbol input_register_polled_device (err 0)
[   10.471265] PVR_K:(Warning): SysFinalise: Version string: SGX540 S5PC110 [478, drivers/gpu/pvr/s5pc110/sysconfig.c]
[   11.202314] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   16.900628] android_usb gadget: high speed config #1: Android Composite

希望能得到满意回答，非常感谢

用根目录下的config_TQ210_linux_V1.1，连启动都无法完成

yaotianzhan 发表于 2012-12-18 22:40
用根目录下的config_TQ210_linux_V1.1，连启动都无法完成

你的编译器用的是光盘的编译器吗？arm-linux-gcc -v 看下，无法启动有什么串口调试信息么，贴出来方便大家跟帖