wince烧写问题求教

请教：2440板，我在nad flash 烧写WINCE，到最后步，烧NK内核时，DNW里选USB下载-UBOOT-选内核文件-下载后不能运行WINCE，是什么问题？
开始下载...

Addr: 0x30000000 ; Size: 0x1AD4CB2
Read Bin Files StartAddr:0x80200000 ; Length: 0x1B3BCDC

Download BIN file information:
-----------------------------------------------------
[0]: Base Address=0x80200000  Length=0x1b3bcdc
-----------------------------------------------------
+=OEMVerifyMemory+ dwStartAddr:0x80200000  dwLength:0x1b3bcdc
RAM image 0xa 0x81d3bcdb

下载完成
rom_offset=0x0.
ROMHDR at Address 80200044h
+WriteOSImageToBootMedia: g_dwTocEntry =1, ImageStart: 0x80200000, ImageLength: 0x1b3bcdc, LaunchAddr:0x80201000
INFO: OEMLaunch: Found chain extenstion: '' @ 0x80200000
Writing single region/multi-region update, dwBINFSPartLength: 28556508
CreatePartition: Enter CreatePartition for 0x21.
LastLogSector: Last log sector is: 0x7e9ff.
CreatePartition: Start = 0x1100, Num = 0xda00.
WriteMBR: MBR block = 0x10.
WriteData: Start = 0x0, Length = 0x1b3bcdc.
Updateded TOC!
CreatePartition: Enter CreatePartition for 0xb.
FindFreeSector: FreeSector is: 0xeb00 after processing part 0x21.
CreatePartition: Num sectors set to 0x6fa00 to allow for compaction blocks.
CreatePartition: Start = 0xeb00, Num = 0x6fa00.
WriteMBR: MBR block = 0x10.
TOC {
dwSignature: 0x434F544E
BootCfg {
  ConfigFlags: 0x2830
  BootDelay: 0x1
  ImageIndex: 1
  IP: 192.168.1.6
  MAC Address: 10:23:45:67:89:AB
  Port: 0.0.0.0
  SubnetMask: 255.255.255.0
}
ID[0] {
  dwVersion: 0x60000
  dwSignature: 0x45424F54
  String: 'eboot.nb0'
  dwImageType: 0x2
  dwTtlSectors: 0x400
  dwLoadAddress: 0x80038000
  dwJumpAddress: 0x80038000
  dwStoreOffset: 0x0
  sgList[0].dwSector: 0x400
  sgList[0].dwLength: 0x400
}
ID[1] {
  dwVersion: 0x1
  dwSignature: 0x43465348
  String: ''
  dwImageType: 0x2
  dwTtlSectors: 0xD9DF
  dwLoadAddress: 0x80200000
  dwJumpAddress: 0x80201000
  dwStoreOffset: 0x0
  sgList[0].dwSector: 0x2100
  sgList[0].dwLength: 0xD9DF
}
chainInfo.dwLoadAddress: 0X00000000
chainInfo.dwFlashAddress: 0X00000000
chainInfo.dwLength: 0X00000000
}
waitforconnect
INFO: OEMLaunch: Jumping to Physical Address 0x30201000h (Virtual Address 0x80201000h)...
到这里不动了

你弄错了吧，wince是烧stepldr,eboot,nk的

原来是屏幕的原因，实际WINCE已加载成功。现在新问题又来了：
用JLINK对nor flash烧写uboot后，开机，3.5 LCD屏启动时只会在最下面显示一道很窄的白条，上面的部分都是黑色的。这又是为何原因？难道是烧写UBOOT问题？但uboot可以正常使用啊。 晕了，之因为这样屏幕这样，才使我误以为NAD flash加载WINCE不成功。

不好意思，解决了。新买的板，以为是3.5寸的屏，实际是4.3的。汗死！