本帖最后由 木♀木 于 2013-1-31 21:59 编辑
?
*** Warning - bad CRC or NAND, using default environment
##### EmbedSky BIOS for SKY6410/TQ6410 #####
This Board: SDRAM is 256MB; LCD display size is: 480X272
Press Space key to Download Mode !
SD and FAT initialize success!
file length is 0x36d.
condition=INSTALL
OSType=LINUX
beep state=ON
bootloader=images\bootloader\u-boot_nand_256MB_T43_V1.3.bin
file length is 0x64000.
NAND erase: device 0 offset 0x0, size 0x80000
Erasing at 0x0 -- 100% complete.
OK
NAND write: device 0 offset 0x0, size 0xd000
Writing data at 0xc000 -- 100% complete.
53248 bytes written: OK
logodir=images\logo\logo_T43.bin
file length is 0x3fc00.
NAND erase: device 0 offset 0x100000, size 0x200000
Erasing at 0x280000 -- 100% complete.
OK
NAND write: device 0 offset 0x100000, size 0x8000
Writing data at 0x107000 -- 100% complete.
32768 bytes written: OK
Linux zImage=images\linux\zImage_3.0_T43_V1.3.bin
file length is 0x337c80.
NAND erase: device 0 offset 0x300000, size 0x400000
Erasing at 0x680000 -- 100% complete.
OK
NAND write: device 0 offset 0x300000, size 0x67000
Writing data at 0x366000 -- 100% complete.
421888 bytes written: OK
Linux rootfs=images\root\root_TQ6410_PDA_MLC2GB_V1.3.ubi
NAND erase: device 0 offset 0x700000, size 0x7f900000
Erasing at 0x7ff80000 -- 100% complete.
OK
Creating 1 MTD partitions on "nand0":
0x00700000-0x80000000 : "mtd=4"
Creating dynamic volume rootfs of size 2083995648
Volume "rootfs" found at volume id 0.
UBIFS image length is 0x485a000, Write UBIFS to rootfs, please wait.
Writing 100% complete.
UBIFS write compilete!
Saving Environment to NAND...
Erasing Nand...
Erasing at 0x80000 -- 100% complete.
Writing to Nand... done
Start Linux ......
NAND read: device 0 offset 0x300000, size 0x400000
................................................................................
.....................
4194304 bytes read: OK
Boot with zImage
Starting kernel ...
|
/1 
IP卡
狗仔卡
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
抢沙发
千斤顶
显身卡