刷linux系统出现的no filesystem could mount root,tried:vfat yaffs yaffs2

我的板子是TQ2440，按照官方手册上开始刷官方提供系统，其实就是想体验下刷机流程和步骤，手册怎么说我就怎么做了，包括使用哪个文件什么的。
刷完uboot\系统镜像\文件系统\开机logo之后，重启系统，系统一直停留在开机界面，反复重启，串口打印出来的信息中有一句
no filesystem could mount root,tried:vfat yaffs yaffs2
Kernel panic-no syncing:VFS:Unable to mount rootfs on unknow block。

期间怀疑是坏块已经做完多次重新格式化处理，还是不好使，求指教。

PS：看了以下上次发的帖，半个月前的，好吧，我这半个月啥进度也没有，郁闷中(由于在公司电脑上，公司电脑不能联网，所以没法上传错误信息和图片，请谅解)

补充下，网上有人说是
原因是：（1）内核的NAND 没有分区 （2）没有对YAFFS的支持

我的问题是 按照官方教程和系统，也需要上述两个条件吗？要修改哪儿啊

把你下载的镜像名称和下载的方法都贴上来

TQ-lkp 发表于 2013-5-15 09:09
把你下载的镜像名称和下载的方法都贴上来

谢谢你，我的是天嵌TQ2440 4.3寸屏，刷写方法按照TQ2440开发板使用手册V2.5——20100611要求的来。
首先往norflash里用Jtag烧入一个uboot 版本为u-boot-1.1.6_Q43_20100601.bin
其次，根据4.4.1章节linux烧写实战usb篇里指示的步骤烧入系统，步骤为：
1.        刷uboot，版本u-boot-1.1.6_Q43_20100601.bin
2.        烧写内核镜像版本zImage_Q43_2.6.30.4_20100531.bin
3.        烧写文件系统版本root_qtopia_2.2.0_2.6.30.4_256MB_20100601.bin
4.        烧写开机logo logo_480_272.bin

烧写完毕之后的启动信息
nandwrite.yaffs 0x30000000 0x50000 0x3325c80 ##### EmbedSky BIOS for SKY2440/TQ2440 ##### Press Space key to Download Mode ! Booting Linux ... Copy linux kernel from 0x00200000 to 0x30008000, size = 0x00300000 ... Copy Kernel to SDRAM done,NOW, Booting Linux......
Uncompressing Linux......................................................................................................................................................... done, booting the kernel.
Linux version 2.6.30.4-EmbedSky (root@EmbedSky) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-176) ) #8 Mon May 31 10:57:52 CST 2010
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
CPU: VIVT data cache, VIVT instruction cache
Machine: TQ2440
ATAG_INITRD is deprecated; please update your bootloader.
Memory policy: ECC disabled, Data cache writeback
CPU S3C2440A (id 0x32440001)
S3C24XX Clocks, (c) 2004 Simtec Electronics
S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttySAC0
NR_IRQS:85
irq: clearing pending ext status 00080000
irq: clearing subpending status 00000002
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
console [ttySAC0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 59860KB available (4320K code, 448K data, 240K init, 0K highmem)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 199.47 BogoMIPS (lpj=498688)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 296 bytes
NET: Registered protocol family 16
S3C2440: Initialising architecture
S3C2440: IRQ Support
S3C24XX DMA Driver, (c) 2003-2004,2006Simtec Electronics
DMA channel 0 at c4808000, irq 33
DMA channel 1 at c4808040, irq 34
DMA channel 2 at c4808080, irq 35
DMA channel 3 at c48080c0, irq 36
S3C244X: Clock Support, DVS off
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
s3c2440-i2cs3c2440-i2c: slave address 0x10
s3c2440-i2cs3c2440-i2c: bus frequency set to 97 KHz
s3c2440-i2cs3c2440-i2c: i2c-0: S3C I2C adapter
cfg80211: Calling CRDA to update world regulatory domain
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
yaffs May 31 2010 10:39:00 Installing.
msgmni has been set to 117
alg: No test for stdrng (krng)
io scheduler noop registered (default)
Console: switching to colour frame buffer device 60x17
fb0: s3c2410fb frame buffer device
backlight initialized
GPIO-Control initialized
PWM-Test initialized
adc initialized
s3c2440-uart.0: tq2440_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440
s3c2440-uart.1: tq2440_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440
s3c2440-uart.2: tq2440_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
loop: module loaded
Driver 'sd' needs updating - please use bus_type methods
dm9000 Ethernet Driver, V1.31
Now use the default MAC address: 10:23:45:67:89:ab
eth0 (dm9000): not using net_device_ops yet
eth0: dm9000e at c4814000,c4818004 IRQ 51 MAC: 10:23:45:67:89:ab (EmbedSky)
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c2440-nands3c2440-nand: Tacls=2, 20ns Twrph0=3 30ns, Twrph1=2 20ns
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
NAND_ECC_NONE selected by board driver. This is not recommended !!
Scanning device for bad blocks
Bad eraseblock 81 at 0x000000a20000
Bad eraseblock 84 at 0x000000a80000
Bad eraseblock 85 at 0x000000aa0000
Bad eraseblock 87 at 0x000000ae0000
Bad eraseblock 88 at 0x000000b00000
Bad eraseblock 90 at 0x000000b40000
Bad eraseblock 461 at 0x0000039a0000
Bad eraseblock 813 at 0x0000065a0000
Bad eraseblock 829 at 0x0000067a0000
Bad eraseblock 1527 at 0x00000bee0000
Creating 3 MTD partitions on "NAND 256MiB 3,3V 8-bit":
0x000000000000-0x000000040000 : "EmbedSky_Board_uboot"
0x000000200000-0x000000500000 : "EmbedSky_Board_kernel"
0x000000500000-0x000010000000 : "EmbedSky_Board_yaffs2"
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohcis3c2410-ohci: S3C24XX OHCI
s3c2410-ohcis3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohcis3c2410-ohci: irq 42, iomem 0x49000000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: S3C24XX OHCI
usb usb1: Manufacturer: Linux 2.6.30.4-EmbedSky ohci_hcd
usb usb1: SerialNumber: s3c24xx
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
s3c2410_udc: debugfsdir creation failed -19
s3c2440-usbgadgets3c2440-usbgadget: S3C2440: increasing FIFO to 128 bytes
mice: PS/2 mouse device common for all mice
TQ2440 TouchScreen successfully loaded
input: TQ2440 TouchScreen as /devices/virtual/input/input0

TQ-lkp 发表于 2013-5-15 09:09
把你下载的镜像名称和下载的方法都贴上来

S3C24XX RTC, (c) 2004,2006Simtec Electronics
s3c2410-rtcs3c2410-rtc: rtc disabled, re-enabling
s3c2410-rtcs3c2410-rtc: rtc core: registered s3c as rtc0
i2c /dev entries driver
Linux video capture interface: v2.00
cx231xx v4l2 driver loaded.
usbcore: registered new interface driver cx231xx
usbcore: registered new interface driver usbvision
USBVision USB Video Device Driver for Linux : 0.9.10
usbcore: registered new interface driver ov511
ov511: v1.64 for Linux 2.5:ov511 USB Camera Driver
SE401 usb camera driver version 0.24 registering
usbcore: registered new interface driver se401
usbcore: registered new interface driver stv680
stv680 [usb_stv680_init:1550]
STV(i): usb camera driver version v0.25 registering<6>stv680: v0.25:STV0680 USB Camera Driver
w9968cf: V4L driver for W996[87]CF JPEG USB Dual Mode Camera Chip 1:1.34-basic
usbcore: registered new interface driver w9968cf
usbcore: registered new interface driver zr364xx
zr364xx: Zoran 364xx
usbcore: registered new interface driver stkwebcam
sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47pre49
usbcore: registered new interface driver sn9c102
et61x251: V4L2 driver for ET61X[12]51 PC Camera Controllers v1:1.09
usbcore: registered new interface driver et61x251
pwc: Philips webcam module version 10.0.13 loaded.
pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
usbcore: registered new interface driver Philips webcam
zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10
usbcore: registered new interface driver zc0301
gspca: main v2.5.0 registered
usbcore: registered new interface driver conex
conex: registered
usbcore: registered new interface driver etoms
etoms: registered
usbcore: registered new interface driver finepix
finepix: registered
usbcore: registered new interface driver mars
mars: registered
usbcore: registered new interface driver mr97310a
mr97310a: registered
usbcore: registered new interface driver ov519
ov519: registered
usbcore: registered new interface driver ov534
ov534: registered
usbcore: registered new interface driver pac207
pac207: registered
usbcore: registered new interface driver pac7311
pac7311: registered
usbcore: registered new interface driver sonixb
sonixb: registered
usbcore: registered new interface driver sonixj
sonixj: registered
usbcore: registered new interface driver spca500
spca500: registered
usbcore: registered new interface driver spca501
spca501: registered
usbcore: registered new interface driver spca505
spca505: registered
usbcore: registered new interface driver spca506
spca506: registered
usbcore: registered new interface driver spca508
spca508: registered
usbcore: registered new interface driver spca561
spca561: registered
usbcore: registered new interface driver sq905
sq905: registered
usbcore: registered new interface driver sq905c
sq905c: registered
usbcore: registered new interface driver sunplus
sunplus: registered
usbcore: registered new interface driver stk014
stk014: registered
usbcore: registered new interface driver t613
t613: registered
usbcore: registered new interface driver tv8532
tv8532: registered
usbcore: registered new interface driver vc032x
vc032x: registered
usbcore: registered new interface driver zc3xx
zc3xx: registered
usbcore: registered new interface driver ALi m5602
ALi m5602: registered
usbcore: registered new interface driver STV06xx
STV06xx: registered
usbcore: registered new interface driver ibmcam
usbcore: registered new interface driver ultracam
konicawc: v1.4:Konica Webcam driver
usbcore: registered new interface driver konicawc
usbcore: registered new interface driver vicam
quickcam_messenger: v0.01:LogitechQuickcam Messenger USB
usbcore: registered new interface driver QCM
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdts3c2410-wdt: starting watchdog timer
s3c2410-wdts3c2410-wdt: watchdog active, reset abled, irq enabled
mapped channel 0 to 0
s3c2440-sdis3c2440-sdi: powered down.
s3c2440-sdis3c2440-sdi: initialisation done.
s3c2440-sdis3c2440-sdi: powered down.
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.18a.
No device for DAI UDA134X
No device for DAI s3c24xx-i2s
S3C24XX_UDA134X SoC Audio driver
UDA134X SoC Audio Codec
asoc: UDA134X <-> s3c24xx-i2s mapping ok
ALSA device list:
  #0: S3C24XX_UDA134X (UDA134X)
TCP cubic registered
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
lib80211: common routines for IEEE802.11 drivers
s3c2410-rtcs3c2410-rtc: hctosys: invalid date/time
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs: auto selecting yaffs2
block 42 is bad
block 45 is bad
block 46 is bad
block 48 is bad
block 49 is bad
block 51 is bad
block 422 is bad
block 774 is bad
block 790 is bad
block 1488 is bad
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
block 42 is bad
block 45 is bad
block 46 is bad
block 48 is bad
block 49 is bad
block 51 is bad
block 422 is bad
block 774 is bad
block 790 is bad
block 1488 is bad
List of all partitions:
1f00             256 mtdblock0 (driver?)
1f01            3072 mtdblock1 (driver?)
1f02          257024 mtdblock2 (driver?)
No filesystem could mount root, tried:  vfatyaffs yaffs2
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,2)
Backtrace:
[<c0048fd4>] (dump_backtrace+0x0/0x10c) from [<c0349710>] (dump_stack+0x18/0x1c)
r7:c380c0cb r6:c04b7d40 r5:c380c000 r4:c381df40
[<c03496f8>] (dump_stack+0x0/0x1c) from [<c0349760>] (panic+0x4c/0x124)
[<c0349714>] (panic+0x0/0x124) from [<c0008e90>] (mount_block_root+0x1d8/0x234)
r3:00000029 r2:c381df53 r1:c381df40 r0:c0411d28
[<c0008cb8>] (mount_block_root+0x0/0x234) from [<c0008f9c>] (mount_root+0xb0/0xf4)
[<c0008eec>] (mount_root+0x0/0xf4) from [<c00090d8>] (prepare_namespace+0xf8/0x18c)
r7:c04b7724 r6:c002083c r5:c002083c r4:c002084c
[<c0008fe0>] (prepare_namespace+0x0/0x18c) from [<c0008478>] (kernel_init+0xc8/0xf4)
r7:00000000 r6:c001f05c r5:c001ec40 r4:c001f05c
[<c00083b0>] (kernel_init+0x0/0xf4) from [<c0059f30>] (do_exit+0x0/0x620)
r7:00000000 r6:00000000 r5:00000000 r4:00000000

顶起，怎么没有人回复呀？