请问，蓝牙打不开是原因

蓝牙模块，使用的是开发板自带的模块，图片如下：
内核使用的是：zImage_3.0.8_for_android_V1.0.bin
文件系统使用的是：rootfs_android_4.0.4_V1.0.bin
把蓝牙模块接入USB0
在android的设置中打开蓝牙开关，一直停在下面的界面中，请问是什么原因？

补充更正：开发板图片，USB接上USB1上，开发板的左上角上面那个USB口。C:\Documents and Settings\Administrator\桌面\TQ210\初始\04.png

开发板图片

蓝牙模块要插着开机的

蓝牙模块一直是插着开机的

使用logcat打开蓝牙时的日志信息，请问是什么原因，谢谢！！！
01-02 00:03:16.159: D/dalvikvm(2556): GREF has increased to 201
01-02 00:03:16.164: I/ActivityManager(2271): START {act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] flg=0x10200000 cmp=com.android.settings/.Settings bnds=[360,332][473,411]} from pid 2556
01-02 00:03:16.189: D/PermissionCache(2163): checking android.permission.READ_FRAME_BUFFER for uid=1000 => granted (1076 us)
01-02 00:03:16.209: D/AudioHardware(2166): AudioHardware pcm playback is exiting standby.
01-02 00:03:16.209: D/AudioHardware(2166): openPcmOut_l() mPcmOpenCnt: 0
01-02 00:03:16.469: D/dalvikvm(2271): GC_CONCURRENT freed 467K, 6% free 9337K/9927K, paused 3ms+25ms
01-02 00:03:16.769: I/Process(2271): Sending signal. PID: 2497 SIG: 3
01-02 00:03:16.774: I/dalvikvm(2497): threadid=3: reacting to signal 3
01-02 00:03:16.844: D/OpenGLRenderer(2556): Flushing caches (mode 1)
01-02 00:03:16.869: I/dalvikvm(2497): Wrote stack traces to '/data/anr/traces.txt'
01-02 00:03:17.009: W/System.err(2497): Removed 2131231186
01-02 00:03:17.009: W/System.err(2497): Removed 2131231194
01-02 00:03:17.024: D/dalvikvm(2497): GC_CONCURRENT freed 156K, 4% free 6997K/7239K, paused 2ms+6ms
01-02 00:03:17.079: D/LocalBluetoothProfileManager(2497): LocalBluetoothProfileManager construction complete
01-02 00:03:17.174: D/dalvikvm(2271): GC_EXPLICIT freed 446K, 11% free 8916K/9927K, paused 2ms+10ms
01-02 00:03:17.209: D/libEGL(2497): loaded /system/lib/egl/libGLES_android.so
01-02 00:03:17.214: D/libEGL(2497): loaded /vendor/lib/egl/libEGL_POWERVR_SGX540_120.so
01-02 00:03:17.214: D/libEGL(2497): loaded /vendor/lib/egl/libGLESv1_CM_POWERVR_SGX540_120.so
01-02 00:03:17.224: D/libEGL(2497): loaded /vendor/lib/egl/libGLESv2_POWERVR_SGX540_120.so
01-02 00:03:17.254: I/Process(2271): Sending signal. PID: 2497 SIG: 3
01-02 00:03:17.254: I/dalvikvm(2497): threadid=3: reacting to signal 3
01-02 00:03:17.284: I/dalvikvm(2497): Wrote stack traces to '/data/anr/traces.txt'
01-02 00:03:17.359: D/OpenGLRenderer(2497): Enabling debug mode 0
01-02 00:03:17.419: D/OpenGLRenderer(2556): Flushing caches (mode 0)
01-02 00:03:17.754: I/Process(2271): Sending signal. PID: 2497 SIG: 3
01-02 00:03:17.759: I/dalvikvm(2497): threadid=3: reacting to signal 3
01-02 00:03:17.764: I/dalvikvm(2497): Wrote stack traces to '/data/anr/traces.txt'
01-02 00:03:17.869: I/ActivityManager(2271): Displayed com.android.settings/.Settings: +1s634ms
01-02 00:03:19.219: D/AudioHardware(2166): AudioHardware pcm playback is going to standby.
01-02 00:03:19.219: D/AudioHardware(2166): closePcmOut_l() mPcmOpenCnt: 1
01-02 00:04:19.184: I/ActivityManager(2271): START {act=android.intent.action.MAIN cmp=com.android.settings/.SubSettings (has extras)} from pid 2497
01-02 00:04:19.209: D/AudioHardware(2166): AudioHardware pcm playback is exiting standby.
01-02 00:04:19.209: D/AudioHardware(2166): openPcmOut_l() mPcmOpenCnt: 0
01-02 00:04:19.309: D/LocalBluetoothManager(2497): setting foreground activity to non-null context
01-02 00:04:19.589: D/dalvikvm(2497): GC_CONCURRENT freed 138K, 4% free 7299K/7559K, paused 2ms+8ms
01-02 00:04:19.664: I/ActivityManager(2271): Displayed com.android.settings/.SubSettings: +447ms
01-02 00:04:19.694: D/OpenGLRenderer(2497): Flushing caches (mode 0)
01-02 00:04:22.214: D/AudioHardware(2166): AudioHardware pcm playback is going to standby.
01-02 00:04:22.214: D/AudioHardware(2166): closePcmOut_l() mPcmOpenCnt: 1

开发板已已寄给您们，请帮忙解决蓝牙不能驱动的问题，谢谢
下面这段就是在setting中操作打开蓝牙模块的日志，和上面日志中的信息相同，请看看是不是这段日志
01-02 00:16:38.819: I/ActivityManager(2271): START {act=android.intent.action.MAIN cmp=com.android.settings/.SubSettings (has extras)} from pid 2479
01-02 00:16:38.849: D/AudioHardware(2166): AudioHardware pcm playback is exiting standby.
01-02 00:16:38.849: D/AudioHardware(2166): openPcmOut_l() mPcmOpenCnt: 0
01-02 00:16:38.929: D/LocalBluetoothManager(2479): setting foreground activity to non-null context
01-02 00:16:39.079: I/ActivityManager(2271): Displayed com.android.settings/.SubSettings: +225ms
01-02 00:16:39.099: D/OpenGLRenderer(2479): Flushing caches (mode 0)
01-02 00:16:41.854: D/AudioHardware(2166): AudioHardware pcm playback is going to standby.
01-02 00:16:41.854: D/AudioHardware(2166): closePcmOut_l() mPcmOpenCnt: 1
01-02 00:16:46.019: D/AudioHardware(2166): AudioHardware pcm playback is exiting standby.
01-02 00:16:46.019: D/AudioHardware(2166): openPcmOut_l() mPcmOpenCnt: 0
01-02 00:16:46.034: D/LocalBluetoothManager(2479): setting foreground activity to null
01-02 00:16:46.159: D/OpenGLRenderer(2479): Flushing caches (mode 0)
01-02 00:16:46.439: D/dalvikvm(2479): GC_EXPLICIT freed 155K, 4% free 7379K/7623K, paused 2ms+14ms
01-02 00:16:46.459: E/StrictMode(2479): class com.android.settings.SubSettings; instances=2; limit=1
01-02 00:16:46.459: E/StrictMode(2479): android.os.StrictMode$InstanceCountViolation: class com.android.settings.SubSettings; instances=2; limit=1
01-02 00:16:46.459: E/StrictMode(2479):         at android.os.StrictMode.setClassInstanceLimit(StrictMode.java:1)
01-02 00:16:49.029: D/AudioHardware(2166): AudioHardware pcm playback is going to standby.
01-02 00:16:49.029: D/AudioHardware(2166): closePcmOut_l() mPcmOpenCnt: 1

日志不对，板子到了我们试下你的蓝牙模块
我们随便从市场上买了几个都是可以用的，不过android的蓝牙是有bug的，到4.2才修复了
鼠标可以正常使用，可以发文件，但收文件会有问题。我们正在跟进解决。

好的，感谢支持

蓝牙问题，不知定位到原因没有，我寄回来的开发板，什么时候能寄回，谢谢！！！