我在wince6.0的时候出现如下是什么情况

我将程序烧写进去，走到这里不懂了-------------------------------------------------[0]: Base Address=0x80200000  Length=0x1dd0a9c
-----------------------------------------------------
+=OEMVerifyMemory+ dwStartAddr:0x80200000  dwLength:0x1dd0a9c
RAM image 0xa 0x81fd0a9b
rom_offset=0x0.
ROMHDR at Address 80200044h
+WriteOSImageToBootMedia: g_dwTocEntry =1, ImageStart: 0x80200000, ImageLength: 0x1dd0a9c, LaunchAddr:0x80201000
INFO: OEMLaunch: Found chain extenstion: '' @ 0x80200000
Writing single region/multi-region update, dwBINFSPartLength: 31263388
CreatePartition: Enter CreatePartition for 0x21.
LastLogSector: Last log sector is: 0x7ecff.
CreatePartition: Start = 0x1100, Num = 0xef00.
WriteMBR: MBR block = 0x10.
WriteData: Start = 0x0, Length = 0x1dd0a9c.
Updateded TOC!
CreatePartition: Enter CreatePartition for 0xb.
FindFreeSector: FreeSector is: 0x10000 after processing part 0x21.
CreatePartition: Num sectors set to 0x6e800 to allow for compaction blocks.
CreatePartition: Start = 0x10000, Num = 0x6e800.
WriteMBR: MBR block = 0x10.
TOC {
dwSignature: 0x434F544E
BootCfg {
  ConfigFlags: 0x2830
  BootDelay: 0x1
  ImageIndex: 1
  IP: 192.168.1.6
  MAC Address: 10:23:45:67:89:AB
  Port: 0.0.0.0
  SubnetMask: 255.255.255.0
}
ID[0] {
  dwVersion: 0x60000
  dwSignature: 0x45424F54
  String: 'eboot.nb0'
  dwImageType: 0x2
  dwTtlSectors: 0x400
  dwLoadAddress: 0x80038000
  dwJumpAddress: 0x80038000
  dwStoreOffset: 0x0
  sgList[0].dwSector: 0x400
  sgList[0].dwLength: 0x400
}
ID[1] {
  dwVersion: 0x1
  dwSignature: 0x43465348
  String: ''
  dwImageType: 0x2
  dwTtlSectors: 0xEE86
  dwLoadAddress: 0x80200000
  dwJumpAddress: 0x80201000
  dwStoreOffset: 0x0
  sgList[0].dwSector: 0x2100
  sgList[0].dwLength: 0xEE86
}
chainInfo.dwLoadAddress: 0X00000000
chainInfo.dwFlashAddress: 0X00000000
chainInfo.dwLength: 0X00000000
}
waitforconnect
INFO: OEMLaunch: Jumping to Physical Address 0x30201000h (Virtual Address 0x80201000h)...

不知道为啥下面的东西发表不上去了，总之是走到这里的时候就不行了
Explorer(V2.0) taskbar thread started.
NDISPWR:: Found adapter [DM9CE1]

我知道了，本人解决了，原来是我的屏幕的分辨率不对，