qtopia启动不了，我已经摸索两天了，还没解决，各位大神，求助啊

chenzhe805 · 发表于 2013-10-23 16:54:24

我是按照天嵌的手册-《QT程序开发完全手册之24小时超级版本》的操作完成向文件系统添加qtopia-2.2.0，实际执行，文件系统可以使用，tq2440开发板屏幕校准后，黑屏，几秒后系统重启，串口打印信息如下：
TCP cubic registered
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
lib80211: common routines for IEEE802.11 drivers
s3c2410-rtc s3c2410-rtc: hctosys: invalid date/time
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs: auto selecting yaffs2
block 358 is bad
block 388 is bad
block 1851 is bad
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:2.
Freeing init memory: 240K
Start Qtopia-2.2.0

Please press Enter to activate this console.
[root@Enjoylinux /]# ls
bin       home       mnt       sbin       udisk
dev       lib       opt       sddisk    usr
etc       linuxrc    proc       sys       var
hello    lost+found  root       tmp
[root@Enjoylinux /]# *** Warning - bad CRC or NAND, using default environment

##### EmbedSky BIOS for SKY2440/TQ2440 #####
Press Space key to Download Mode !
Booting Linux ...
Copy linux kernel from 0x00200000 to 0x30008000, size = 0x00300000 ... Copy Kernel to

SDRAM done,NOW, Booting Linux......
Uncompressing

Linux...................................................................................

...................................................................... done, booting the

kernel.

chenzhe805 · 发表于 2013-10-23 16:59:05

控制台还可以用命令操作，可以打印出目录：
[root@Enjoylinux /]# ls
bin       home       mnt       sbin       udisk
dev       lib       opt       sddisk    usr
etc       linuxrc    proc       sys       var
hello    lost+found  root       tmp

说明文件系统制作没问题，编译qtopia时，也没看到编译出错啊，问题出在哪里了？