本帖最后由 zhubo 于 2015-9-21 22:51 编辑
我买了ov9650 摄像模块,使用了光板上的相关驱动和测试代码,但运行时无任何反应
Camera Test Program, Start !
fb memory info=xres (480) x yres (272), 16 bpp
Press Ctrl+C to stop !
set format to EMBEDSKY_PREVIEW
set bright data=160
camera type :0 ov9650==0,saa7113==1
set red=64
set blue=64
到此处就停止了,屏幕上也没有显示图像,请问是我哪里弄错了吗
ov9650 address 0x60, manufacture ID 0xFFFF, expect 0x7FA2
SAA7113 address 0x4A, manufacture 0xFF, expect 0x11
unreconize id found!show ID
ov9650 address 0x60, product ID 0xFF, expect 0x7FA2
ov9650 init done!
这显示驱动是正常吗?
mjpg_streamer -i "/lib/WebCam/input_cmoscamera.so -r 320x256" -o "/lib/WebCam/
output_http.so -w 192.168.1.110:8080"
MJPG-streamer [606]: starting application
MJPG Streamer Version.: 2.0
MJPG-streamer [606]: MJPG Streamer Version.: 2.0
i: Using CMOS Camera device.: /dev/camera
MJPG-streamer [606]: Using CMOS Camera device.: /dev/camera
i: Desired Resolution: 320 x 256
MJPG-streamer [606]: Desired Resolution: 320 x 256
i: Frames Per Second.: 5
MJPG-streamer [606]: Frames Per Second.: 5
i: Format............: YUV
MJPG-streamer [606]: Format............: YUV
i: JPEG Quality......: 80
MJPG-streamer [606]: JPEG Quality......: 80
OV9650 Close
o: www-folder-path...: 192.168.1.110:8080/
MJPG-streamer [606]: www-folder-path...: 192.168.1.110:8080/
o: HTTP TCP port.....: 8080
MJPG-streamer [606]: HTTP TCP port.....: 8080
运行的时候 ov9650 close
|