无线网卡移植，cannot insert问题

我用的是最新版的光盘资料，2.6.30.4内核，256M nand ，编译器是4.3.3的
网卡移植配置好后，启动终端显示如下（一部分）：
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:2.
Freeing init memory: 180K
insmod: cannot insert '/lib/input_polldev.ko': unknown symbol in module, or unkn
own parameter
rt2x00lib: Unknown symbol input_allocate_polled_device
rt2x00lib: Unknown symbol input_free_polled_device
rt2x00lib: Unknown symbol input_register_polled_device
rt2x00lib: Unknown symbol input_unregister_polled_device
insmod: cannot insert '/lib/rt2x00lib.ko': unknown symbol in module, or unknown
parameter
rt2x00usb: Unknown symbol rt2x00lib_probe_dev
rt2x00usb: Unknown symbol rt2x00lib_rxdone
rt2x00usb: Unknown symbol rt2x00lib_remove_dev
rt2x00usb: Unknown symbol rt2x00lib_txdone
rt2x00usb: Unknown symbol rt2x00queue_get_queue
insmod: cannot insert '/lib/rt2x00usb.ko': unknown symbol in module, or unknown
parameter
rt73usb: Unknown symbol rt2x00mac_add_interface
rt73usb: Unknown symbol rt2x00mac_get_stats
rt73usb: Unknown symbol rt2x00usb_disable_radio
rt73usb: Unknown symbol rt2x00mac_set_key
rt73usb: Unknown symbol rt2x00usb_vendor_request_buff
rt73usb: Unknown symbol rt2x00usb_vendor_request_large_buff
rt73usb: Unknown symbol rt2x00usb_kick_tx_queue
rt73usb: Unknown symbol rt2x00usb_write_tx_data
rt73usb: Unknown symbol rt2x00mac_config_interface
rt73usb: Unknown symbol rt2x00mac_remove_interface
rt73usb: Unknown symbol rt2x00usb_vendor_request
rt73usb: Unknown symbol rt2x00usb_probe
rt73usb: Unknown symbol rt2x00mac_config
rt73usb: Unknown symbol rt2x00queue_get_queue
rt73usb: Unknown symbol rt2x00usb_clear_entry
rt73usb: Unknown symbol rt2x00mac_conf_tx
rt73usb: Unknown symbol rt2x00mac_start
rt73usb: Unknown symbol rt2x00mac_stop
rt73usb: Unknown symbol rt2x00mac_configure_filter
rt73usb: Unknown symbol rt2x00usb_disconnect
rt73usb: Unknown symbol rt2x00mac_tx
rt73usb: Unknown symbol rt2x00usb_vendor_req_buff_lock
rt73usb: Unknown symbol rt2x00mac_get_tx_stats
rt73usb: Unknown symbol rt2x00usb_regbusy_read
rt73usb: Unknown symbol rt2x00usb_kill_tx_queue
rt73usb: Unknown symbol rt2x00usb_uninitialize
rt73usb: Unknown symbol rt2x00usb_initialize
rt73usb: Unknown symbol rt2x00mac_bss_info_changed
insmod: cannot insert '/lib/rt73usb.ko': unknown symbol in module, or unknown pa
rameter
usbcore: registered new interface driver zd1211rw
/etc/init.d/rcS: line 34: /etc/rc.d/init.d/httpd: Permission denied
/etc/init.d/rcS: line 32: net_set: Permission denied

Please press Enter to activate this console.
[\u@\h \W]# ?*** Warning - bad CRC or NAND, using default environment

论坛里的相似帖子也看过了，还是解决不了，请管理员帮忙看一下。

你烧写天嵌科技提供的文件系统吧，你自己做的文件系统问题太多了。

2# 亚瑟王
可能是我那地方做错了吧，这已经是第2次了，我再按照教程重新弄一次！