才到手的板子，烧写有问题啊，有谁来解决？？

*** Warning - bad CRC or NAND, using default environment



##### EmbedSky BIOS for SKY2440/TQ2440 #####
Press Space key to Download Mode !

#####    Boot for Nor Flash Main Menu   #####
[1] Download u-boot or STEPLDR.nb1 or other bootloader to Nand Flash
[2] Download Eboot to Nand Flash
[3] Download Linux Kernel to Nand Flash
[5] Download CRAMFS image to Nand Flash
[6] Download YAFFS image to Nand Flash
[7] Download Program (uCOS-II or TQ2440_Test) to SDRAM and Run it
[8] Boot the system
[9] Format the Nand Flash
[0] Set the boot parameters
[a] Download User Program (eg: uCOS-II or TQ2440_Test)
[b] Download LOGO Picture (.bin) to Nand  Flash
[l] Set LCD Parameters
[o] Download u-boot to Nor Flash
[r] Reboot u-boot
[q] quit from menu
Enter your selection: 1
USB host is connected. Waiting a download.

Now, Downloading [ADDRESS:30000000h,TOTAL:4106]
RECEIVED FILE SIZE:    4106 (4KB/S, 1S)

NAND erase: device 0 offset 0x0, size 0x40000
Skipping bad block at  0x00000000                                            
Skipping bad block at  0x00020000                                            

OK

NAND write: device 0 offset 0x0, size 0x1000

Bad block at 0x0 in erase block from 0x0 will be skipped
Bad block at 0x20000 in erase block from 0x20000 will be skipped
Bad block at 0x40000 in erase block from 0x40000 will be skipped
Bad block at 0x60000 in erase block from 0x60000 will be skipped
Bad block at 0x80000 in erase block from 0x80000 will be skipped
Bad block at 0xa0000 in erase block from 0xa0000 will be skipped
Bad block at 0xc0000 in erase block from 0xc0000 will be skipped
Bad block at 0xe0000 in erase block from 0xe0000 will be skipped
Bad block at 0x100000 in erase block from 0x100000 will be skipped
Bad block at 0x120000 in erase block from 0x120000 will be skipped
Bad block at 0x140000 in erase block from 0x140000 will be skipped
Bad block at 0x160000 in erase block from 0x160000 will be skipped
Bad block at 0x180000 in erase block from 0x180000 will be skipped
Bad block at 0x1a0000 in erase block from 0x1a0000 will be skipped
Bad block at 0x1c0000 in erase block from 0x1c0000 will be skipped
Bad block at 0x1e0000 in erase block from 0x1e0000 will be skipped
Bad block at 0x200000 in erase block from 0x200000 will be skipped
Bad block at 0x220000 in erase block from 0x220000 will be skipped
Bad block at 0x240000 in erase block from 0x240000 will be skipped
Bad block at 0x260000 in erase block from 0x260000 will be skipped
Bad block at 0x280000 in erase block from 0x280000 will be skipped
Bad block at 0x2a0000 in erase block from 0x2a0000 will be skipped
Bad block at 0x2c0000 in erase block from 0x2c0000 will be skipped
Bad block at 0x2e0000 in erase block from 0x2e0000 will be skipped
Bad block at 0x300000 in erase block from 0x300000 will be skipped
Bad block at 0x320000 in erase block from 0x320000 will be skipped
Bad block at 0x340000 in erase block from 0x340000 will be skipped
Bad block at 0x360000 in erase block from 0x360000 will be skipped
Bad block at 0x380000 in erase block from 0x380000 will be skipped
Bad block at 0x3a0000 in erase block from 0x3a0000 will be skipped
Bad block at 0x3c0000 in erase block from 0x3c0000 will be skipped
Bad block at 0x3e0000 in erase block from 0x3e0000 will be skipped
Bad block at 0x400000 in erase block from 0x400000 will be skipped
Bad block at 0x420000 in erase block from 0x420000 will be skipped
Bad block at 0x440000 in erase block from 0x440000 will be skipped
Bad block at 0x460000 in erase block from 0x460000 will be skipped
Bad block at 0x480000 in erase block from 0x480000 will be skipped
Bad block at 0x4a0000 in erase block from 0x4a0000 will be skipped
Bad block at 0x4c0000 in erase block from 0x4c0000 will be skipped
Bad block at 0x4e0000 in erase block from 0x4e0000 will be skipped
Writing data at 0x500800 -- 100% complete.
4096 bytes written: OK

你应该烧写过wince吧，eboot设置了保护分区导致的假坏块。解决方法使用：命令9-》命令1-》y-》回车，彻底格式化Nand Flash，然后重新对Nand镜像烧写。

哦，想不到烧wince还有这种情况，多謝。。

手册里面写了原因的。

你应该烧写过wince吧，eboot设置了保护分区导致的假坏块。解决方法使用：命令9-》命令1-》y-》回车，彻底格式化Nand Flash，然后重新对Nand镜像烧写。
亚瑟王 发表于 2009-9-22 11:32

保护分区是谁设置的？

eboot