新手求助 无线网卡移植问题

按照step by step v4.5 做到网卡驱动移植
跳了DM9000，直接做无线网卡TL-WN321G+的配置
配置内核后串口显示如下：
WARNING: at kernel/mutex.c:207 __mutex_lock_slowpath+0x1dc/0x218()
Modules linked in: mac80211(+) input_polldev
[<c002eac4>] (unwind_backtrace+0x0/0xe8) from [<c004c6bc>] (warn_slowpath_common+0x44/0x78)
[<c004c6bc>] (warn_slowpath_common+0x44/0x78) from [<c02e4cd4>] (__mutex_lock_slowpath+0x1dc/0x218)
[<c02e4cd4>] (__mutex_lock_slowpath+0x1dc/0x218) from [<c02e4d1c>] (mutex_lock+0xc/0x20)
[<c02e4d1c>] (mutex_lock+0xc/0x20) from [<bf010abc>] (ieee80211_rate_control_register+0x2c/0xd8 [mac80211])
unwind: Index not found bf010abc
---[ end trace affeab1062c2b864 ]---
Unable to handle kernel paging request at virtual address e92dd830
pgd = c3b44000
[e92dd830] *pgd=00000000
Internal error: Oops: 5 [#1]
Modules linked in: mac80211(+) input_polldev
CPU: 0    Tainted: G        W   (2.6.30.4-EmbedSky #4)
PC is at strcmp+0x8/0x38
LR is at ieee80211_rate_control_register+0x44/0xd8 [mac80211]
pc : [<c0153070>]    lr : [<bf010ad4>]    psr: 20000013
sp : c3b35ec0  ip : e92dd830  fp : c3b35ee4
r10: c040e040  r9 : bf029000  r8 : bf02617c
r7 : bf026240  r6 : bf026188  r5 : 00000000  r4 : c3b34000
r3 : bf000000  r2 : 00000000  r1 : bf01e614  r0 : e92dd830
Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: c000717f  Table: 33b44000  DAC: 00000015
Process insmod (pid: 999, stack limit = 0xc3b34268)
Stack: (0xc3b35ec0 to 0xc3b36000)
5ec0: 00028e68 001e4fa8 bf026270 c3b34000 c0028fc8 bf029000 c3b35ef4 c3b35ee8
5ee0: bf029028 bf010aa0 c3b35f04 c3b35ef8 bf029010 bf029024 00000000 c3b35f08
5f00: c002829c bf029010 c488d3b8 c488d4d0 c488d070 c488cf5f c39face0 c4896ab8
5f20: 0000001c 0000000a 00000467 00000002 00000002 c488d4f8 c03f3178 bf01e620
5f40: 00000023 bf01e74c 00000002 00000000 00000000 00000000 00000000 00000000
5f60: 00028e68 00028e68 001e4fa8 bf026270 00000000 c0028fc8 c3b34000 00000000
5f80: be880e94 c006fae4 00000003 c3a04600 c39f3200 00028e68 be880f74 000002ec
5fa0: 00000080 c0028e20 00028e68 be880f74 40000008 00028e68 001e4fa8 be880f74
5fc0: 00028e68 be880f74 000002ec 00000080 00000000 00000002 00000000 be880e94
5fe0: be880cb8 be880ca8 0002cdbc 00009300 20000010 40000008 00000000 00000000
[<c0153070>] (strcmp+0x8/0x38) from [<bf010ad4>] (ieee80211_rate_control_register+0x44/0xd8 [mac80211])
unwind: Index not found bf010ad4
Code: e8bd0030 e12fff1e e1a0c000 e3a02000 (e7dc0002)
---[ end trace affeab1062c2b865 ]---
Segmentation fault
rt2x00lib: gave up waiting for init of module mac80211.
rt2x00lib: Unknown symbol ieee80211_register_hw
rt2x00lib: gave up waiting for init of module mac80211.
rt2x00lib: Unknown symbol ieee80211_get_hdrlen_from_skb
rt2x00lib: gave up waiting for init of module mac80211.
rt2x00lib: Unknown symbol ieee80211_wake_queue
rt2x00lib: gave up waiting for init of module mac80211.
rt2x00lib: Unknown symbol ieee80211_tx_status_irqsafe
rt2x00lib: gave up waiting for init of module mac80211.
rt2x00lib: Unknown symbol ieee80211_ctstoself_get
rt2x00lib: gave up waiting for init of module mac80211.
rt2x00lib: Unknown symbol ieee80211_wake_queues
rt2x00lib: gave up waiting for init of module mac80211.
rt2x00lib: Unknown symbol ieee80211_iterate_active_interfaces
rt2x00lib: gave up waiting for init of module mac80211.
rt2x00lib: Unknown symbol ieee80211_stop_queue
rt2x00lib: gave up waiting for init of module mac80211.
rt2x00lib: Unknown symbol ieee80211_stop_queues
rt2x00lib: gave up waiting for init of module mac80211.
rt2x00lib: Unknown symbol ieee80211_iterate_active_interfaces_atomic
rt2x00lib: gave up waiting for init of module mac80211.
rt2x00lib: Unknown symbol ieee80211_unregister_hw
rt2x00lib: gave up waiting for init of module mac80211.
rt2x00lib: Unknown symbol ieee80211_rts_get
rt2x00lib: gave up waiting for init of module mac80211.
rt2x00lib: Unknown symbol ieee80211_beacon_get
rt2x00lib: gave up waiting for init of module mac80211.
rt2x00lib: Unknown symbol ieee80211_rx_irqsafe
insmod: can't insert '/lib/rt2x00lib.ko': unknown symbol in module, or unknown parameter
rt2x00usb: Unknown symbol rt2x00lib_probe_dev
rt2x00usb: gave up waiting for init of module mac80211.
rt2x00usb: Unknown symbol ieee80211_free_hw
rt2x00usb: gave up waiting for init of module mac80211.
rt2x00usb: Unknown symbol ieee80211_alloc_hw
rt2x00usb: Unknown symbol rt2x00lib_rxdone
rt2x00usb: Unknown symbol rt2x00lib_remove_dev
rt2x00usb: Unknown symbol rt2x00lib_txdone
rt2x00usb: Unknown symbol rt2x00queue_get_queue
insmod: can't insert '/lib/rt2x00usb.ko': unknown symbol in module, or unknown parameter
rt73usb: Unknown symbol rt2x00mac_add_interface
rt73usb: Unknown symbol crc_itu_t_table
rt73usb: Unknown symbol rt2x00mac_get_stats
rt73usb: Unknown symbol rt2x00usb_disable_radio
rt73usb: Unknown symbol rt2x00mac_set_key
rt73usb: Unknown symbol rt2x00usb_vendor_request_buff
rt73usb: Unknown symbol rt2x00usb_vendor_request_large_buff
rt73usb: Unknown symbol rt2x00usb_kick_tx_queue
rt73usb: Unknown symbol rt2x00usb_write_tx_data
rt73usb: Unknown symbol rt2x00mac_config_interface
rt73usb: Unknown symbol rt2x00mac_remove_interface
rt73usb: Unknown symbol rt2x00usb_vendor_request
rt73usb: Unknown symbol rt2x00usb_probe
rt73usb: Unknown symbol rt2x00mac_config
rt73usb: Unknown symbol rt2x00queue_get_queue
rt73usb: Unknown symbol rt2x00usb_clear_entry
rt73usb: Unknown symbol rt2x00mac_conf_tx
rt73usb: Unknown symbol rt2x00mac_start
rt73usb: Unknown symbol rt2x00mac_stop
rt73usb: Unknown symbol rt2x00mac_configure_filter
rt73usb: Unknown symbol rt2x00usb_disconnect
rt73usb: Unknown symbol rt2x00mac_tx
rt73usb: Unknown symbol rt2x00usb_vendor_req_buff_lock
rt73usb: Unknown symbol rt2x00mac_get_tx_stats
rt73usb: Unknown symbol rt2x00usb_regbusy_read
rt73usb: Unknown symbol rt2x00usb_kill_tx_queue
rt73usb: Unknown symbol crc_itu_t
rt73usb: Unknown symbol rt2x00usb_uninitialize
rt73usb: Unknown symbol rt2x00usb_initialize
rt73usb: Unknown symbol rt2x00mac_bss_info_changed
insmod: can't insert '/lib/rt73usb.ko': unknown symbol in module, or unknown parameter
zd1211rw: gave up waiting for init of module mac80211.
zd1211rw: Unknown symbol ieee80211_free_hw
zd1211rw: gave up waiting for init of module mac80211.
zd1211rw: Unknown symbol ieee80211_alloc_hw
zd1211rw: gave up waiting for init of module mac80211.
zd1211rw: Unknown symbol ieee80211_register_hw
zd1211rw: gave up waiting for init of module mac80211.
zd1211rw: Unknown symbol ieee80211_tx_status_irqsafe
zd1211rw: gave up waiting for init of module mac80211.
zd1211rw: Unknown symbol ieee80211_wake_queues
zd1211rw: gave up waiting for init of module mac80211.
zd1211rw: Unknown symbol ieee80211_stop_queues
zd1211rw: gave up waiting for init of module mac80211.
zd1211rw: Unknown symbol ieee80211_unregister_hw
zd1211rw: gave up waiting for init of module mac80211.
zd1211rw: Unknown symbol ieee80211_beacon_get
zd1211rw: gave up waiting for init of module mac80211.
zd1211rw: Unknown symbol ieee80211_rx_irqsafe
insmod: can't insert '/lib/zd1211rw.ko': unknown symbol in module, or unknown parameter
initializing s3c2440 camera interface......
s3c2440 camif init done
Loading OV9650 driver.........
OV9650 address 0x60, manufacture ID 0xFFFF, expect 0x7FA2
OV9650 address 0x60, manufacture ID 0xFFFF, expect 0x7FA2
No OV9650 found!!!
Try to bring eth0 interface up ...
ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCSIFHWADDR: No such device
ifconfig eth0 hw ether 10:23:45:67:89:ab
open device leds: No such file or directory
ifconfig: SIOCSIFADDR: No such device
ifconfig eth0 192.168.1.6 netmask 255.255.255.0 up
route: SIOCADDRT: Network is unreachable
add default gw 192.168.1.2
Done
[01/Jan/1970:00:12:43 +0000] boa: server version Boa/0.94.13
[01/Jan/1970:00:12:43 +0000] boa: server built Jul 29 2009 at 14:27:34.
[01/Jan/1970:00:12:43 +0000] boa: starting server pid=1027, port 80
Please press Enter to activate this console.
[root@EmbedSky /]#

这个是什么情况？