linux-2.6.30.4 usb驱动移植

按照2.6.25.8去移植，怎么无法挂载U盘呢？

1# jwx555


啥呢？
原来的内核源代码是可以的呀。
你对比一下，做开发时多对比一下吧。

2# embedsky_lxt


[root@EmbedSky /]# usb 1-1: new full speed USB device using s3c2410-ohci and address 2
usb 1-1: configuration #1 chosen from 1 choice
插上u盘以后只显示以上信息，不出现那个sda的。
加载U盘后显示No such file or directory。

3# jwx555


有没有/dev/sda*    *代表数字

4# embedsky_lxt

没有的

5# jwx555


那说明驱动不对呀

我也是按照2.6.25.8 移植的，也是挂不上

Please press Enter to activate this console. usb 1-1: new full speed USB device using s3c2410-ohci and address 2
usb 1-1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
scsi 0:0:0:0: Direct-Access                               1.00 PQ: 0 ANSI: 4
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 15171584 512-byte hardware sectors: (7.76 GB/7.23 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!

[root@EmbedSky /]#
[root@EmbedSky /]# mount /dev/sda1 /mnt/udisk/
mount: mounting /dev/sda1 on /mnt/udisk/ failed: No such file or directory