求助:TQ2440下载wince问题

刚开始玩arm，选择了tq2440 3.5寸开发板，求助下为什么下载Linux很好，下载wince就会这样？
##### Eboot for TQ2440/SKY2440 #####
#####     www.embedsky.net     #####

Microsoft Windows CE Bootloader for TQ2440/SKY2440 Version 6.0 Built Jun 12 2010

Press [ENTER] to launch image stored on boot media, or [SPACE] to enter boot monitor.

Initiating image launch in 1 seconds.
Launching image from boot media ...
OEMPlatformInit: IMAGE_TYPE_RAMIMAGE
+=OEMVerifyMemory+ dwStartAddr:0x0  dwLength:0x4
Stepldr image
+=OEMVerifyMemory+ dwStartAddr:0x0  dwLength:0x4
Stepldr image
ReadOSImageFromBootMedia: ERROR_INVALID_ADDRESS: (address=0x0, sectors=0x0, launch address=0x0)...
OEMPlatformInit ERROR: Failed to load kernel region into RAM.
各位大大救命啊

wince下载请严格按照手册中的顺序，一步都不能少的哦

TQ-lkp 发表于 2012-7-3 09:11
wince下载请严格按照手册中的顺序，一步都不能少的哦

就是一步步来的啊，烧写Linux都成功了，wince就是不行

把详细过程写一下，包括现象

有个同样的问题 ，我用usb能很好的烧 wince 但是我用TFTP烧那个启动文件和eboot根本烧钱不进去，一启动就白屏

TQ-lkp 发表于 2012-7-3 09:11
wince下载请严格按照手册中的顺序，一步都不能少的哦

求助！！！两周前在贵公司买的TQ2440，利用USB烧录WINCE6.0，第一次烧录好用，第二次再烧录就启动不了，液晶是4.3寸的屏
现象：
下载NK.bin过程中液晶一半白屏，一半logo
重启后只显示logo,无法启动系统

下面是串口助手里的信息：
    ##### Eboot for TQ2440/SKY2440 #####
#####     www.embedsky.net     #####

Microsoft Windows CE Bootloader for TQ2440/SKY2440 Version 6.0 Built Apr 12 2013

Press [ENTER] to launch image stored on boot media, or [SPACE] to enter boot monitor.

Initiating image launch in 0 seconds.
Launching image from boot media ...
OEMPlatformInit: IMAGE_TYPE_RAMIMAGE
+=OEMVerifyMemory+ dwStartAddr:0x0  dwLength:0x4
Stepldr image
+=OEMVerifyMemory+ dwStartAddr:0x0  dwLength:0x4
Stepldr image
ReadOSImageFromBootMedia: ERROR_INVALID_ADDRESS: (address=0x0, sectors=0x0, launch address=0x0)...
OEMPlatformInit ERROR: Failed to load kernel region into RAM.

非也 发表于 2012-7-3 11:04
把详细过程写一下，包括现象

求教！！！两周前在贵公司买的TQ2440，利用USB烧录WINCE6.0，第一次烧录好用，第二次再烧录就启动不了，液晶是4.3寸的屏
现象：
下载NK.bin过程中液晶一半白屏，一半logo
重启后只显示logo,无法启动系统

下面是串口助手里的信息：
    ##### Eboot for TQ2440/SKY2440 #####
#####     www.embedsky.net     #####

Microsoft Windows CE Bootloader for TQ2440/SKY2440 Version 6.0 Built Apr 12 2013

Press [ENTER] to launch image stored on boot media, or [SPACE] to enter boot monitor.

Initiating image launch in 0 seconds.
Launching image from boot media ...
OEMPlatformInit: IMAGE_TYPE_RAMIMAGE
+=OEMVerifyMemory+ dwStartAddr:0x0  dwLength:0x4
Stepldr image
+=OEMVerifyMemory+ dwStartAddr:0x0  dwLength:0x4
Stepldr image
ReadOSImageFromBootMedia: ERROR_INVALID_ADDRESS: (address=0x0, sectors=0x0, launch address=0x0)...
OEMPlatformInit ERROR: Failed to load kernel region into RAM.

我之前也是这个问题。。不知道你的USB是不是用的台式机后面的USB接口，我改用后面的接口之后就好了。

怎么回到原来的uboot下载界面