TQ210 Install Android From SD , Boot Failure!!!

##### EmbedSky BIOS for SKY210/TQ210 #####
This Board: SDRAM is 1024MB; LCD display size is: 800X480
Hit any key to stop autoboot:  0
SD and FAT initialize success!
file length is 0x374.
condition=INSTALL
OSType=ANDROID
beep state=ON

bootloader=images\bootloader\u-boot_TQ210_v1.0.bin
file length is 0x6c000.

NAND erase: device 0 offset 0x0, size 0x100000
Erasing at 0xe0000 -- 100% complete.
OK

NAND write: device 0 offset 0x0, size 0x6c000
Main area read (4 blocks):
Checksum is calculated.
Main area write (4 blocks):
524288 bytes written: OK

logodir=images\logo\logo_800x480.bin
file length is 0x177000.

NAND erase: device 0 offset 0x200000, size 0x300000
Erasing at 0x4e0000 -- 100% complete.
OK

NAND write: device 0 offset 0x200000, size 0x177000

Writing data at 0x9d6800 -- 100% complete.
5074596 bytes written: OK

Android rootfs=images\android\rootfs_TQ210_Android_4.0.4_V1.4_20140321.bin

NAND erase: device 0 offset 0xa00000, size 0x3f600000
Writing data at 0xa3a2800 -- 100% complete.
166134144 bytes written: OK
Saving Environment to NAND...
Erasing Nand...
Erasing at 0x100000 -- 100% complete.
Writing to Nand... done

NAND read: device 0 offset 0x500000, size 0x500000


5242880 bytes read: OK
Boot with zImage

Starting kernel ...

Android File : zImage_Kernel_3.0.8_TQ210_for_Android_v2.1_CoreB_20140410.bin and
                    rootfs_TQ210_Android_4.0.4_V1.4_20140321.bin

你没有烧写zImage，启动时候找不到