SD卡启动问题

1. ##### EmbedSky BIOS for SKY210/TQ210 #####
   
2. This Board: SDRAM is 1024MB; LCD display size is: 800X480
   
3. Hit any key to stop autoboot:  0
   
4. SD and FAT initialize success!
   
5. file length is 0x23a.
   
6. LineCount=32
   
7. condition=INSTALL
   
8. OSType=ANDROID
   
9. beep state=ON
   
10. 
    
11. bootloader=u-boot.bin
    
12. file length is 0x6c000.
    
13. 
    
14. NAND erase: device 0 offset 0x0, size 0x100000
    
15. Erasing at 0xe0000 -- 100% complete.
    
16. OK
    
17. 
    
18. NAND write: device 0 offset 0x0, size 0x6c000
    
19. Main area read (4 blocks):
    
20. Checksum is calculated.
    
21. Main area write (4 blocks):
    
22. 524288 bytes written: OK
    
23. 
    
24. logodir=images\logo.bin
    
25. file length is 0x1d4c00.
    
26. 
    
27. NAND erase: device 0 offset 0x200000, size 0x300000
    
28. Erasing at 0x4e0000 -- 100% complete.
    
29. OK
    
30. 
    
31. NAND write: device 0 offset 0x200000, size 0x1d4c00
    
32. 
    
33. Writing data at 0x3d4800 -- 100% complete.
    
34. 1920000 bytes written: OK
    
35. 
    
36. Android zImage=images\android\zImage.bin
    
37. file length is 0x4d6ea4.
    
38. 
    
39. NAND erase: device 0 offset 0x500000, size 0x500000
    
40. Erasing at 0x9e0000 -- 100% complete.
    
41. OK
    
42. 
    
43. NAND write: device 0 offset 0x500000, size 0x4d6ea4
    
44. 
    
45. Writing data at 0x9d6800 -- 100% complete.
    
46. 5074596 bytes written: OK
    
47. 
    
48. Android rootfs=images\android\rootfs.bin
    
49. 
    
50. NAND erase: device 0 offset 0xa00000, size 0x3f600000
    
51. Skipping bad block at  0x07ca0000                                            
    
52. Skipping bad block at  0x154e0000                                            
    
53. Erasing at 0x3ffe0000 -- 100% complete.
    
54. OK
    
55. 
    
56. NAND write: device 0 offset 0xa00000
    
57. 
    
58. Bad block at 0x7ca0000 in erase block from 0x7ca0000 will be skipped
    
59. Writing data at 0xa3c2800 -- 100% complete.
    
60. 166134144 bytes written: OK
    
61. Saving Environment to NAND...
    
62. Erasing Nand...
    
63. Erasing at 0x100000 -- 100% complete.
    
64. Writing to Nand... done
    
65. 
    
66. NAND read: device 0 offset 0x500000, size 0x500000
    
67. 
    
68. 
    
69. 5242880 bytes read: OK
    
70. Boot with zImage
    
71. 
    
72. Starting kernel ...
    

复制代码

然后就一直停在这，

用其它 方式烧同样的镜像,能不能启动?

TQ-ZQL 发表于 2015-1-4 16:31
用其它 方式烧同样的镜像,能不能启动?

用USB可以正常启动

TQ-ZQL 发表于 2015-1-4 16:31
用其它 方式烧同样的镜像,能不能启动?

还有我从tftp下载，ping不通，你们提供的uboot里面是不是没有网卡驱动。