请问usb wifi问题

板主您好

我的硬件配置：
核心板　Core B
底板　　V3
源码  TQ210_V2.2_for_CoreB_C_Android4.0

问题：
使用USB WIFI(RT5370) 连不上。

有先试过　光盘的img　是不行的。

我用源码编译修改的过程如下
=init.rc=
insmod /system/lib/modules/rt5370sta.ko
取消注释

＝device.mk=
#    device/embedsky/tq210/configs/Capacitance_ts.idc:system/usr/idc/Capacitance_ts.idc \
整行移除

=wpa_supplicant.conf=
fast_reauth=1
ctrl_interface=wlan0
update_config=1
ap_scan=1

network={
        ssid="250-18"
        scan_ssid=1
        key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
        pairwise=TKIP CCMP
        group=CCMP TKIP WEP104 WEP40
        psk="2121686878"
}

请板主　指导一下　是不是还需要修改　其它地方？还是要检查什麽？
谢谢




＝下面是部份　开机信息＝
root@android:/ # reboot
SysRq : Emergency Remount R/O
Emergency Remount complete
Restarting system.
OK
##### EmbedSky BIOS for SKY210/TQ210 #####
This Board: SDRAM is 1024MB; LCD display size is: 800X480
Hit any key to stop autoboot:  0
Start Linux ......
NAND read: device 0 offset 0x500000, size 0x500000


5242880 bytes read: OK
Boot with zImage

Starting kernel ...


s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-01 01:14:31 UTC (946689271)
FIMC0 registered successfully
FIMC1 registered successfully
FIMC2 registered successfully
S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
s5p-tvout s5p-tvout: hpd status is cable removed
yaffs: dev is 32505859 name is "mtdblock3" rw
yaffs: yaffs: Attempting MTD mount of 31.3,"mtdblock3"
yaffs: yaffs_read_super: is_checkpointed 1
VFS: Mounted root (yaffs2 filesystem) on device 31:3.
Freeing init memory: 172K
init: cannot open '/initlogo.rle'
[init] SMB380 is error!
Acceleration_sensor: probe of Acceleration_sensor failed with error -1
input: Android Temperature Sensor as /devices/virtual/input/input4
rtusb init rt2870 --->
usbcore: registered new interface driver rt2870
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
android_usb: already disabled
/system/bin/sh: No controlling tty (open /dev/tty: No such device or address)
/system/bin/sh: warning: won't have full job control
adb_open
adb_bind_config
android_work: did not send uevent (0 0   (null))
root@android:/ # android_work: sent uevent USB_STATE=CONNECTED
android_usb gadget: high speed config #1: android
android_work: sent uevent USB_STATE=CONFIGURED
asoc: wm8960-hifi <-> samsung-i2s.0 mapping ok
asoc: wm8960-hifi <-> samsung-i2s.0 mapping ok
warning: `rild' uses 32-bit capabilities (legacy support in use)
PVR_K:(Warning): SysFinalise: Version string: SGX540 S5PC110 [543, drivers/gpu/pvr/s5pc110/sysconfig.c]
win->id=0, pmem_start=0x50989000
s3cfb s3cfb: [fb0] dma: 0x50989000, cpu: 0xf8800000, size: 0x00465000
s3cfb s3cfb: [fb1] dma: 0x4e000000, cpu: 0xff900000, size: 0x002ee000
pmem: request for physical address of pmem region from process 2522.
er.ServerThread (2584): /proc/2570/oom_adj is deprecated, please use /proc/2570/oom_score_adj instead.
request_suspend_state: wakeup (3->0) at 58523342782 (2000-01-01 01:15:27.454722885 UTC)
acc_open
acc_release
0x1300 = 00064300
0x1300 = 00064300
0x1300 = 00064300
0x1300 = 00064300
0x1300 = 00064300
0x1300 = 00064300
MacValue1=e
MacValue2=c
0x1300 = 00064300
0x1300 = 00064300
0x1300 = 00064300


＝用logcat查看＝

E/WifiHW  ( 2463): wifi_change_fw_path: STA
D/SoftapController( 2463): Softap fwReload - Ok
D/NetworkManagementService( 2570): rsp <213 00:23:c0:03:fd:ed 0.0.0.0 0 [up broadcast multicast]>
D/CommandListener( 2463): Setting iface cfg
D/CommandListener( 2463): Trying to bring down wlan0
D/NetworkManagementService( 2570): flags <[up broadcast multicast]>
D/CommandListener( 2463): broadcast flag ignored
D/CommandListener( 2463): multicast flag ignored
E/CommandListener( 2463): Failed to open /proc/sys/net/ipv6/conf/wlan0/use_tempaddr: No such file or directory
E/WifiStateMachine( 2570): Unable to change interface settings: java.lang.IllegalStateException: Unable to communicate with native daemon to }
D/WifiHW  ( 2570): get_wifi_ifname_from_proc: wlan0
D/WifiHW  ( 2570): get_wifi_ifname_from_proc: wlan0
E/WifiHW  ( 2570): rtw_issue_driver_cmd_fd: failed to issue private command: error:100 Network is down
D/WifiHW  ( 2570): get_wifi_ifname_from_proc: wlan0
D/WifiHW  ( 2570): get_wifi_ifname_from_proc: wlan0
D/WifiHW  ( 2570): get_wifi_ifname_from_proc: wlan0
D/WifiHW  ( 2570): get_wifi_ifname_from_proc: wlan0
D/WifiHW  ( 2570): get_wifi_ifname_from_proc: wlan0
D/WifiHW  ( 2570): get_wifi_ifname_from_proc: wlan0
0x1300 = 00064300
0x1300 = 00064300
0x1300 = 00064300
0x1300 = 00064300
0x1300 = 00064300

210v3默认是sdiowifi的.不支持usbwifi的

TQ-ZQL 发表于 2015-7-15 17:08
210v3默认是sdiowifi的.不支持usbwifi的

有修改方法 提供吗？

TQ210 v4的板子支持吗