关于TQ2440添加wifi （RT5370）驱动的问题

usbcore: registered new interface driver rt73usb
usbcore: registered new interface driver zd1211rw
initializing s3c2440 camera interface......
s3c2440 camif init done
Loading OV9650 driver.........
OV9650 address 0x60, manufacture ID 0xFFFF, expect 0x7FA2
OV9650 address 0x60, manufacture ID 0xFFFF, expect 0x7FA2
No OV9650 found!!!
Try to bring eth0 interface up ...

ifconfig: SIOCSIFADDR: No such device
ifconfig wlan0 192.168.1.6 netmask 255.255.255.0 up
route: SIOCADDRT: Network is unreachable
route add default gw 192.168.1.1
Error for wireless request "Set ESSID" (8B1A) :
    SET failed on device wlan0 ; No such device.
iwconfig wlan0 essid EmbedSky key 123456
Done
[15/Feb/2010:15:39:05 +0000] boa: server version Boa/0.94.13
[15/Feb/2010:15:39:05 +0000] boa: server built Jul 29 2009 at 14:27:34.
[15/Feb/2010:15:39:05 +0000] boa: starting server pid=492, port 80
[root@EmbedSky /]# iwconfig

lo        no wireless extensions.
eth0      no wireless extensions.

[root@EmbedSky /]# cd lib
[root@EmbedSky /lib]# insmod rt5370sta.ko

rtusb init --->
===>rt2870_probe()!
--> RTMPAllocAdapterBlock
=== pAd = c4966000, size = 504104 ==
<-- RTMPAllocAdapterBlock, Status=0
NumEndpoints=7
BULK IN MaxPacketSize = 64
EP address = 0x81
BULK OUT MaxPacketSize = 64
EP address = 0x 1
BULK OUT MaxPacketSize = 64
EP address = 0x 2
BULK OUT MaxPacketSize = 64
EP address = 0x 3
BULK OUT MaxPacketSize = 64
EP address = 0x 4
BULK OUT MaxPacketSize = 64
EP address = 0x 5
BULK OUT MaxPacketSize = 64
EP address = 0x 6
STA Driver version-2.4.0.0
NVM is EFUSE
Allocate a net device with private data size=0!
The name of the new ra interface is ra0...
RtmpOSNetDevAttach()--->
ra0 (): not using net_device_ops yet
<---RtmpOSNetDevAttach(), ret=0
<===rt2870_probe()!
usbcore: registered new interface driver rt2870
这里已经显示驱动添加成功，为什么"ifconfig ra0 up“  会出现以下信息呢 ？求大家帮忙
[root@EmbedSky /lib]# ifconfig ra0 up
Allocate 8192 memory for BA reordering
MAC_CSR0  [ Ver:Rev=0x53900502]
<=== RtmpAsicLoadFirmware (status=0)
--> RTMPAllocTxRxRingMemory
--> NICInitTransmit
MGMT Ring: total 32 entry allocated
<-- NICInitTransmit(Status=0)
--> NICInitRecv
<-- NICInitRecv(Status=0)
<-- RTMPAllocTxRxRingMemory, Status=0
--> MLME Initialize
<-- MLME Initialize
--> UserCfgInit
--> UserCfgInit. BACapability = 0x3024040
<-- UserCfgInit
--> NICInitializeAdapter
<== DMA offset 0x208 = 0x75
--> NICInitializeAsic
MAC_CSR0  [ Ver:Rev=0x53900502]
-->RTUSBVenderReset
<--RTUSBVenderReset
BBP version = 67
--->Disable TSF synchronization
<-- NICInitializeAsic
<-- NICInitializeAdapter
CountryRegion=5
CountryRegionABand=7
CountryCode=
RTMPSetProfileParameters::(SSID=11n-AP)
RTMPSetProfileParameters::(NetworkType=1)
Channel=0
PhyMode=5
BeaconPeriod=100
TxPower=100
BGProtection=0
TxPreamble=0
RTSThreshold=2347
FragThreshold=2346
TxBurst=1
PktAggregate=0
WmmCapable=1
AckPolicy[0]=0
AckPolicy[1]=0
AckPolicy[2]=0
AckPolicy[3]=0
APSDCapable=0
APSDAC0  0
APSDAC1  0
APSDAC2  0
APSDAC3  0
IEEE80211H=0
WirelessEvent=0
RTMPSetProfileParameters::(AuthMode=0)
RTMPSetProfileParameters::(EncrypType=1)
DefaultKeyID(0~3)=0
Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
HT: MIMOPS Mode  = 3
HT: BA Decline  = Disable
HT: Auto BA  = Enable
HT: RDG = Enable(+HTC)
HT: Tx A-MSDU = Disable
HT: MPDU Density = 4
HT: BA Windw Size = 64
HT: Guard Interval = 400
HT: Operate Mode = Mixed Mode
HT: Channel Width = 40 MHz
HT: Ext Channel = BELOW
HT: MCS = AUTO
HT: STBC = 0
HT: Disallow TKIP mode = ON
PSMode=0
AutoRoaming=0
RoamThreshold=-70  dBm
TGnWifiTest=0
BeaconLostTime=800
1. Phy Mode = 5
2. Phy Mode = 5
--> NICReadEEPROMParameters
NVM is Efuse and its size =2d[2d0-2fc]
MlmeSetPsmBit = 0
eFuseGetFreeBlockCount is 0x2d
NVM is Efuse and the information is too less to bring up interface. Force to use
EEPROM Buffer Mode
FileName=/tmp/RT30xxEEPROM.bin
RtmpOSFileOpen(): Error 2 opening /tmp/RT30xxEEPROM.bin
--> Error opening /tmp/RT30xxEEPROM.bin
NVM is Efuse and force to use EEPROM Buffer Mode=1
--> E2PROM_CSR = 0x20408
--> EEPROMAddressNum = 6
Initialize MAC Address from E2PROM
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
E2PROM MAC: =00:00:00:00:00:00
Use the MAC address what is assigned from EEPROM.
Current MAC: =00:00:00:00:00:00
Read from EEPROM Buffer
Read from EEPROM Buffer
RTMPReadChannelPwr: pAd->TxPower[0].Power = 0x00, pAd->TxPower[0].Tx0FinePowerCt
rl = 0x00, pAd->TxPower[1].Power = 0x00, pAd->TxPower[1].Tx0FinePowerCtrl = 0x00
, pAd->TxPower[0].Power2 = 0x00, pAd->TxPower[0].Tx1FinePowerCtrl = 0x00, pAd->T
xPower[1].Power2 = 0x00, pAd->TxPower[1].Tx1FinePowerCtrl = 0x00,
Read from EEPROM Buffer
Read from EEPROM Buffer
RTMPReadChannelPwr: pAd->TxPower[2].Power = 0x00, pAd->TxPower[2].Tx0FinePowerCt
rl = 0x00, pAd->TxPower[3].Power = 0x00, pAd->TxPower[3].Tx0FinePowerCtrl = 0x00
, pAd->TxPower[2].Power2 = 0x00, pAd->TxPower[2].Tx1FinePowerCtrl = 0x00, pAd->T
xPower[3].Power2 = 0x00, pAd->TxPower[3].Tx1FinePowerCtrl = 0x00,
Read from EEPROM Buffer
Read from EEPROM Buffer
RTMPReadChannelPwr: pAd->TxPower[4].Power = 0x00, pAd->TxPower[4].Tx0FinePowerCt
rl = 0x00, pAd->TxPower[5].Power = 0x00, pAd->TxPower[5].Tx0FinePowerCtrl = 0x00
, pAd->TxPower[4].Power2 = 0x00, pAd->TxPower[4].Tx1FinePowerCtrl = 0x00, pAd->T
xPower[5].Power2 = 0x00, pAd->TxPower[5].Tx1FinePowerCtrl = 0x00,
Read from EEPROM Buffer
Read from EEPROM Buffer
RTMPReadChannelPwr: pAd->TxPower[6].Power = 0x00, pAd->TxPower[6].Tx0FinePowerCt
rl = 0x00, pAd->TxPower[7].Power = 0x00, pAd->TxPower[7].Tx0FinePowerCtrl = 0x00
, pAd->TxPower[6].Power2 = 0x00, pAd->TxPower[6].Tx1FinePowerCtrl = 0x00, pAd->T
xPower[7].Power2 = 0x00, pAd->TxPower[7].Tx1FinePowerCtrl = 0x00,
Read from EEPROM Buffer
Read from EEPROM Buffer
RTMPReadChannelPwr: pAd->TxPower[8].Power = 0x00, pAd->TxPower[8].Tx0FinePowerCt
rl = 0x00, pAd->TxPower[9].Power = 0x00, pAd->TxPower[9].Tx0FinePowerCtrl = 0x00
, pAd->TxPower[8].Power2 = 0x00, pAd->TxPower[8].Tx1FinePowerCtrl = 0x00, pAd->T
xPower[9].Power2 = 0x00, pAd->TxPower[9].Tx1FinePowerCtrl = 0x00,
Read from EEPROM Buffer
Read from EEPROM Buffer
RTMPReadChannelPwr: pAd->TxPower[10].Power = 0x00, pAd->TxPower[10].Tx0FinePower
Ctrl = 0x00, pAd->TxPower[11].Power = 0x00, pAd->TxPower[11].Tx0FinePowerCtrl =
0x00, pAd->TxPower[10].Power2 = 0x00, pAd->TxPower[10].Tx1FinePowerCtrl = 0x00,
pAd->TxPower[11].Power2 = 0x00, pAd->TxPower[11].Tx1FinePowerCtrl = 0x00,
Read from EEPROM Buffer
Read from EEPROM Buffer
RTMPReadChannelPwr: pAd->TxPower[12].Power = 0x00, pAd->TxPower[12].Tx0FinePower
Ctrl = 0x00, pAd->TxPower[13].Power = 0x00, pAd->TxPower[13].Tx0FinePowerCtrl =
0x00, pAd->TxPower[12].Power2 = 0x00, pAd->TxPower[12].Tx1FinePowerCtrl = 0x00,
pAd->TxPower[13].Power2 = 0x00, pAd->TxPower[13].Tx1FinePowerCtrl = 0x00,
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
E2PROM: Version = 0, FAE release #0
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
NICReadEEPROMParameters: RxPath = 0, TxPath = 0
phy mode> Error! The chip does not support 5G band 0!
RTMPSetPhyMode : PhyMode=9, channel=0
country code=5/7, RFIC=0, PHY mode=9, support 14 channels
BuildChannel # 1 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 2 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 3 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 4 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 5 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 6 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 7 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 8 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 9 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 10 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 11 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 12 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 13 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 14 :: Pwr0 = 0, Pwr1 =0,
RTMPSetPhyMode: channel is out of range, use first channel=1
RTMPSetHT : HT_mode(0), ExtOffset(3), MCS(33), BW(1), STBC(0), SHORTGI(1)
RTMPSetHT : RxBAWinLimit = 64
RTMPSetHT : AMsduSize = 0, MimoPs = 3, MpduDensity = 4, MaxRAmpduFactor = 3
EDCA [#0]: AIFSN CWmin CWmax  TXOP(us)  ACM
     AC_BE       3      4      6         0     0
     AC_BK       7      4     10         0     0
     AC_VI       1      3      4      3008     0
     AC_VO       1      2      3      1504     0
RTMPSetIndividualHT : Desired MCS = 33
MlmeUpdateHtTxRates===>
MlmeUpdateHtTxRates<=== Use Fixed MCS = 32
MlmeUpdateHtTxRates<---.AMsduSize = 0
TX: MCS[0] = 0 (choose 32), BW = 1, ShortGI = 1, MODE = 2,
MlmeUpdateHtTxRates<===
Chip specific bbpRegTbSize=0!
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
E2PROM: G Tssi[-4 .. +4] = 0 0 0 0 - 0 -0 0 0 0, step=0, tuning=0
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
E2PROM: A Tssi[-4 .. +4] = 0 0 0 0 - 0 -0 0 0 0, step=0, tuning=0
Read from EEPROM Buffer
E2PROM: RF FreqOffset=0x0
RTMPSetPhyMode : PhyMode=9, channel=1
country code=128/128, RFIC=0, PHY mode=9, support 11 channels
BuildChannel # 1 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 2 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 3 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 4 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 5 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 6 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 7 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 8 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 9 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 10 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 11 :: Pwr0 = 0, Pwr1 =0,
RTMPSetHT : HT_mode(0), ExtOffset(3), MCS(33), BW(1), STBC(0), SHORTGI(1)
RTMPSetHT : RxBAWinLimit = 64
RTMPSetHT : AMsduSize = 0, MimoPs = 3, MpduDensity = 4, MaxRAmpduFactor = 3
EDCA [#0]: AIFSN CWmin CWmax  TXOP(us)  ACM
     AC_BE       3      4      6         0     0
     AC_BK       7      4     10         0     0
     AC_VI       1      3      4      3008     0
     AC_VO       1      2      3      1504     0
RTMPSetIndividualHT : Desired MCS = 33
MlmeUpdateHtTxRates===>
MlmeUpdateHtTxRates<=== Use Fixed MCS = 32
MlmeUpdateHtTxRates<---.AMsduSize = 0
TX: MCS[0] = 0 (choose 32), BW = 1, ShortGI = 1, MODE = 2,
MlmeUpdateHtTxRates<===
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Read from EEPROM Buffer
Txpower per Rate
Read from EEPROM Buffer
Gpwrdelta = 0, Apwrdelta = 0 .
Read from EEPROM Buffer
Read from EEPROM Buffer
20MHz BW, 2.4G band-0,  Adata = 0,  Gdata = 0
Read from EEPROM Buffer
Read from EEPROM Buffer
20MHz BW, 2.4G band-0,  Adata = 0,  Gdata = 0
Read from EEPROM Buffer
Read from EEPROM Buffer
20MHz BW, 2.4G band-0,  Adata = 0,  Gdata = 0
Read from EEPROM Buffer
Read from EEPROM Buffer
20MHz BW, 2.4G band-0,  Adata = 0,  Gdata = 0
Read from EEPROM Buffer
Read from EEPROM Buffer
20MHz BW, 2.4G band-0,  Adata = 0,  Gdata = 0
<-- NICReadEEPROMParameters
3. Phy Mode = 9
--> NICInitAsicFromEEPROM
NICInitRT5390RFRegisters: Initialize the RF registers to the default valuesAsicS
etRxAnt, switch to main antenna
--> RT5390_PostBBPInitialization
RT5390_PostBBPInitialization: BBP_R105: BBPR105.field.EnableSIGRemodulation = 0,
BBPR105.field.MLDFor2Stream = 1
<-- RT5390_PostBBPInitialization
RTMPSetLED::Mode=0,HighByte=0x20,LowByte=0x00
NICInitAsicFromEEPROM: pAd->TxPowerCtrl.bInternalTxALC = 0
Use Hw Radio Control Pin=0; if used Pin=0;
NICInitAsicFromEEPROM: pAd->FreqCalibrationCtrl.bEnableFrequencyCalibration = 1
TxPath = 0, RxPath = 0, RFIC=0, Polar+LED mode=0
<-- NICInitAsicFromEEPROM
---> InitFrequencyCalibration
---> StopFrequencyCalibration
StopFrequencyCalibration: pAd->FreqCalibrationCtrl.AdaptiveFreqOffset = 0x0
<--- StopFrequencyCalibration
InitFrequencyCalibration: frequency offset in the EEPROM = 0
<--- InitFrequencyCalibration
RTMPSetPhyMode : PhyMode=9, channel=1
country code=128/128, RFIC=0, PHY mode=9, support 11 channels
BuildChannel # 1 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 2 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 3 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 4 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 5 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 6 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 7 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 8 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 9 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 10 :: Pwr0 = 0, Pwr1 =0,
BuildChannel # 11 :: Pwr0 = 0, Pwr1 =0,
RTMPSetHT : HT_mode(0), ExtOffset(3), MCS(33), BW(1), STBC(0), SHORTGI(1)
RTMPSetHT : RxBAWinLimit = 64
RTMPSetHT : AMsduSize = 0, MimoPs = 3, MpduDensity = 4, MaxRAmpduFactor = 3
EDCA [#0]: AIFSN CWmin CWmax  TXOP(us)  ACM
     AC_BE       3      4      6         0     0
     AC_BK       7      4     10         0     0
     AC_VI       1      3      4      3008     0
     AC_VO       1      2      3      1504     0
RTMPSetIndividualHT : Desired MCS = 33
MlmeUpdateHtTxRates===>
MlmeUpdateHtTxRates<=== Use Fixed MCS = 32
MlmeUpdateHtTxRates<---.AMsduSize = 0
TX: MCS[0] = 0 (choose 32), BW = 1, ShortGI = 1, MODE = 2,
MlmeUpdateHtTxRates<===
MCS Set = 00 00 00 00 01
NDIS_STATUS_MEDIA_DISCONNECT Event B!
RTUSBBulkReceive!
<==== rt28xx_init, Status=0
==> RTMPEnableRxTx
<== WRITE DMA offset 0x208 = 0x75
<== RTMPEnableRxTx
0x1300 = 00064300
Driver auto reconnect to last OID_802_11_SSID setting - 11n-AP, len - 6
CntlOidSsidProc():CNTL - 0 BSS of 0 BSS match the desire (6)SSID - 11n-AP
CntlOidSsidProc():CNTL - No matching BSS, start a new scan
SCANNING, suspend MSDU transmission ...
[root@EmbedSky /lib]# SYNC - BBP R4 to 20MHz.l
AsicSwitchChannel: 5390: SwitchChannel#1(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF1, K=0x
02, R=0x02
AsicSwitchChannel: 5390: SwitchChannel#2(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF1, K=0x
07, R=0x02
AsicSwitchChannel: 5390: SwitchChannel#3(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF2, K=0x
02, R=0x02
AsicSwitchChannel: 5390: SwitchChannel#4(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF2, K=0x
07, R=0x02
AsicSwitchChannel: 5390: SwitchChannel#5(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF3, K=0x
02, R=0x02
AsicSwitchChannel: 5390: SwitchChannel#6(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF3, K=0x
07, R=0x02
AsicSwitchChannel: 5390: SwitchChannel#7(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF4, K=0x
02, R=0x02
AsicSwitchChannel: 5390: SwitchChannel#8(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF4, K=0x
07, R=0x02
AsicSwitchChannel: 5390: SwitchChannel#9(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF5, K=0x
02, R=0x02
AsicSwitchChannel: 5390: SwitchChannel#10(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF5, K=0
x07, R=0x02
AsicSwitchChannel: 5390: SwitchChannel#11(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF6, K=0
x02, R=0x02
AsicSwitchChannel: 5390: SwitchChannel#1(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF1, K=0x
02, R=0x02
SYNC - End of SCAN, restore to channel 1, Total BSS[00]
SCAN done, resume MSDU transmission ...
Driver auto reconnect to last OID_802_11_SSID setting - 11n-AP, len - 6
CntlOidSsidProc():CNTL - 0 BSS of 0 BSS match the desire (6)SSID - 11n-AP
CntlOidSsidProc():CNTL - No matching BSS, start a new scan
SCANNING, suspend MSDU transmission ...
SYNC - BBP R4 to 20MHz.l
AsicSwitchChannel: 5390: SwitchChannel#1(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF1, K=0x
02, R=0x02
02, R=0x02
07, R=0x02
AsicSwitchChannel: 5390: SwitchChannel#3(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF2, K=0x
02, R=0x02
AsicSwitchChannel: 5390: SwitchChannel#4(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF2, K=0x
07, R=0x02
AsicSwitchChannel: 5390: SwitchChannel#5(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF3, K=0x
02, R=0x02
AsicSwitchChannel: 5390: SwitchChannel#6(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF3, K=0x
07, R=0x02
AsicSwitchChannel: 5390: SwitchChannel#7(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF4, K=0x
02, R=0x02
AsicSwitchChannel: 5390: SwitchChannel#8(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF4, K=0x
07, R=0x02
AsicSwitchChannel: 5390: SwitchChannel#9(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF5, K=0x
02, R=0x02
AsicSwitchChannel: 5390: SwitchChannel#10(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF5, K=0
x07, R=0x02
AsicSwitchChannel: 5390: SwitchChannel#11(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF6, K=0
x02, R=0x02
AsicSwitchChannel: 5390: SwitchChannel#1(RF=0, Pwr0=0, Pwr1=0, 0T), N=0xF1, K=0x
02, R=0x02
SYNC - End of SCAN, restore to channel 1, Total BSS[00]
SCAN done, resume MSDU transmission ...

以下信息是因为你编绎驱动的时候打开了os/linux/config.mk里面的
WFLAGS += -DCONFIG_STA_SUPPORT -DDBG
将这行屏掉就没有调试信息输出了
详细的过程:http://www.armbbs.net/forum.php? ... &highlight=wifi

正在调试中，谢谢版主的及时回复