1支持NAND 启动 支持内核引导 go命令引导无头内核 bootm引导加头内核
2.支持jffs2 yaffs 文件系统
3.支持USB 下载 TFTP下载
4.快捷菜单
功能如下: 设置LCD参数 设置网卡IP等参数 设置启动参数bootargs 快捷挂载LINUX内的文件系统
主菜单如下:
######## ADDED BY DUNKEN,20121120 ########
##### Boot for Nand Flash Main Menu #####
##### USB download mode #####
[1] Download u-boot or other bootloader to Nand Flash
[2] Download Linux Kernel (zImage.bin) to Nand Flash
[3] Download YAFFS image (root.bin) to Nand Flash
[4] Download LOGO Picture (.bin) to Nand Flash 下载相关数据到NAND
[5] Set the boot parameters for TFTP and NFS 设置启动参数
[6] Set the parameters for others 设置其他参数 Boot the system in Nand Flash!! 启动NAND 内的LINUX
[c] Print the information to Serial or VGA 串口和LCD输出切换
[d] Download and boot the system from host by NFS! /*挂载系统,启动参数设置后*/
[e] Enter TFTP download mode menu TFTP下载菜单
[f] Format the Nand Flash 格式化NAND
[l] Set LCD Parameters 设置LCD参数
[r] Reboot u-boot 重启U-BOOT
[p] Print the environment parameters
[q] quit from menu
5.支持LCD参数设置,再也不用重复擦写U-BOOT了
6. 支持LCD输出和串口输出切换 快捷菜单中的“C”
7.支持文件系统挂载和内核下载自动引导
9.支持NOR Flash识别,但NOR FLASH启动没添加,NOR我不打算打它的注意,免得出问题。
10.支持xmodem协议
11.支持开机logo