天嵌 ARM开发社区

 找回密码
 注册
查看: 4038|回复: 5

Nand Flash启动不了

[复制链接]
0013180 发表于 2012-12-18 06:48:07 | 显示全部楼层 |阅读模式
无法从Nand Flash启动

我的Nand Flash型号为K9GAG08UOD
按照手册上的说明把拨码开关拨到如下位置
1 2 3 ON 4 OFF
启动软件SecureCRT 在从新启动开发板 看不到启动信息
拨回正常位置 启动开发板 按空格键 显示信息如下
Microsoft Windows CE Bootloader Common Library Version 1.4 Built Jan 14 2012 17:29:21
Microsoft Windows CE Bootloader for the EmbedSky TQ6410 Version 3.6 Built Jan 14 2012
DDRRAM capacity is 256MB
Press [ENTER] to launch image stored on boot media, or [SPACE] to enter boot monitor.

Initiating image launch in 1 seconds.

Ethernet Boot Loader Configuration:


----------- Connectivity Settings ------------
0) IP address  : [192.168.1.6]
1) Subnet mask : [255.255.255.0]
2) DHCP : [*Enabled]
3) Program DM9000A MAC address : [10:23:45:67:89:AB]
--------- Boot Configuration Section ---------
4) Reset to factory default configuration
5) Startup Action after Boot delay : [Launch Existing OS image from Storage]
6) Boot delay: 1 seconds
R) Read Configuration(TOC)
W) Write Configuration Data(TOC) Right Now
------- Kernel Booting Option Section --------
K) KITL Configuration           : [Disabled]
I) KITL Connection Mode         : [*Interrupt]
C) Force Clean Boot Option      : [*True]
H) Hive Clean on Boot-time      : [*False]
P) Format Partition on Boot-time: [*False]
------------- NAND Flash Section -------------
A) Erase All Blocks(Format FIL)
7) Format VFL (Format FIL + VFL Format)
8) Format FTL (Erase FTL Area + FTL Format)
M) MLC Low level test
--------- Download and Launch Section --------
S) Switch Boot Device : [*Ethernet]  
        { Options : *Ethernet, USB_DNW, SD/MMC }
J) Progress Bar Type : [Deongaree]  
        { Options : Yellow,  Gray,  CambridgeBlue,  Deongaree,  Green,  reserve1,  reserve2, }
T) Download Target: [*Download to RAM]
D) Download or Program image(OS image will be launched)
B) Download and Write Logo Picture to NAND Storage
Q) SD Download or Program image(OS image will be launched)
L) LAUNCH existing Boot Media image

Enter your selection:

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?注册

x
TQ-lkp 发表于 2012-12-18 09:18:26 | 显示全部楼层
本帖最后由 TQ-lkp 于 2012-12-18 09:18 编辑

对照下图中所示,
在您选择从 Nand Flash 启动(MLC:2GB)时,需要将 OM3_OM4 这一路拨到 ON 端,然后将 EINT13
这路拨到编号端,EINT14 到 EINT15 这两路拨到 ON 端,构成 OM3OM4 为 11,EINT13~EINT15 为
011,也就是上面截图中的 Nand Flash 启动(MLC 2GB)栏。


另外你所说的正常位置是从SD卡启动吗?

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?注册

x
 楼主| 0013180 发表于 2012-12-18 14:07:40 | 显示全部楼层
正常位置 指的是 出厂设置的位置
 楼主| 0013180 发表于 2012-12-18 14:19:22 | 显示全部楼层
本帖最后由 0013180 于 2012-12-18 14:24 编辑

又核对了一下 出厂设置是从Nand Flash 启动。但是SecureCRT的显示的信息和手册上不一样
Microsoft Windows CE Bootloader Common Library Version 1.4 Built Jan 14 2012 17:29:21
Microsoft Windows CE Bootloader for the EmbedSky TQ6410 Version 3.6 Built Jan 14 2012
DDRRAM capacity is 256MB
Press [ENTER] to launch image stored on boot media, or [SPACE] to enter boot monitor.

Initiating image launch in 1 seconds.

Ethernet Boot Loader Configuration:


----------- Connectivity Settings ------------
0) IP address  : [192.168.1.6]
1) Subnet mask : [255.255.255.0]
2) DHCP : [*Enabled]
3) Program DM9000A MAC address : [10:23:45:67:89:AB]
--------- Boot Configuration Section ---------
4) Reset to factory default configuration
5) Startup Action after Boot delay : [Launch Existing OS image from Storage]
6) Boot delay: 1 seconds
R) Read Configuration(TOC)
W) Write Configuration Data(TOC) Right Now
------- Kernel Booting Option Section --------
K) KITL Configuration           : [Disabled]
I) KITL Connection Mode         : [*Interrupt]
C) Force Clean Boot Option      : [*True]
H) Hive Clean on Boot-time      : [*False]
P) Format Partition on Boot-time: [*False]
------------- NAND Flash Section -------------
A) Erase All Blocks(Format FIL)
7) Format VFL (Format FIL + VFL Format)
8) Format FTL (Erase FTL Area + FTL Format)
M) MLC Low level test
--------- Download and Launch Section --------
S) Switch Boot Device : [*Ethernet]  
        { Options : *Ethernet, USB_DNW, SD/MMC }
J) Progress Bar Type : [Deongaree]  
        { Options : Yellow,  Gray,  CambridgeBlue,  Deongaree,  Green,  reserve1,  reserve2, }
T) Download Target: [*Download to RAM]
D) Download or Program image(OS image will be launched)
B) Download and Write Logo Picture to NAND Storage
Q) SD Download or Program image(OS image will be launched)
L) LAUNCH existing Boot Media image

Enter your selection:
手册上烧写选项

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?注册

x
 楼主| 0013180 发表于 2012-12-18 14:20:37 | 显示全部楼层
本帖最后由 0013180 于 2012-12-18 14:22 编辑


file:///C:/Documents%20and%20Settings/注意病毒_2/Application%20Data/Tencent/Users/810893409/QQ/WinTemp/RichOle/M@EZRD1X_9Q7_$4BQD%J2SX.jpg
 楼主| 0013180 发表于 2012-12-21 05:40:04 | 显示全部楼层
自己顶 自己顶
您需要登录后才可以回帖 登录 | 注册

本版积分规则

关闭

i.MX8系列ARM cortex A53 M4 工控板上一条 /1 下一条

Archiver|手机版|小黑屋|天嵌 嵌入式开发社区 ( 粤ICP备11094220号 )

GMT+8, 2024-4-30 00:01 , Processed in 1.046875 second(s), 23 queries .

Powered by Discuz! X3.4

Copyright © 2001-2020, Tencent Cloud.

快速回复 返回顶部 返回列表