WINCE 不能进入的问题

提示信息如下：
##### Eboot for TQ2440/SKY2440 #####
#####     www.embedsky.net     #####
Microsoft Windows CE Bootloader for TQ2440/SKY2440 Version 6.0 Built Jun 12 2010
Press [ENTER] to launch image stored on boot media, or [SPACE] to enter boot monitor.
Initiating image launch in 1 seconds. 0 seconds.
Launching image from boot media ...
OEMPlatformInit: IMAGE_TYPE_RAMIMAGE
+=OEMVerifyMemory+ dwStartAddr:0x80200000  dwLength:0x4
RAM image 0xa 0x80200003
+=OEMVerifyMemory+ dwStartAddr:0x80201000  dwLength:0x4
RAM image 0xa 0x80201003
waitforconnect
INFO: OEMLaunch: Jumping to Physical Address 0x30201000h (Virtual Address 0x80201000h)...
.C

刚刚电话沟通过了，如果是只有个别板子这样的信息，就邮回来检查一下。

求教！！！两周前在贵公司买的TQ2440，利用USB烧录WINCE6.0，第一次烧录好用，第二次再烧录就启动不了，液晶是4.3寸的屏
现象：
下载NK.bin过程中液晶一半白屏，一半logo
重启后只显示logo,无法启动系统

下面是串口助手里的信息：
    ##### Eboot for TQ2440/SKY2440 #####
#####     www.embedsky.net     #####

Microsoft Windows CE Bootloader for TQ2440/SKY2440 Version 6.0 Built Apr 12 2013

Press [ENTER] to launch image stored on boot media, or [SPACE] to enter boot monitor.

Initiating image launch in 0 seconds.
Launching image from boot media ...
OEMPlatformInit: IMAGE_TYPE_RAMIMAGE
+=OEMVerifyMemory+ dwStartAddr:0x0  dwLength:0x4
Stepldr image
+=OEMVerifyMemory+ dwStartAddr:0x0  dwLength:0x4
Stepldr image
ReadOSImageFromBootMedia: ERROR_INVALID_ADDRESS: (address=0x0, sectors=0x0, launch address=0x0)...
OEMPlatformInit ERROR: Failed to load kernel region into RAM.

遇到同样的问题，希望有人出来解决下；