天嵌 ARM开发社区

 找回密码
 注册
查看: 5647|回复: 9

天嵌指定的crosstools_3.4.5_softfloat工具光盘里是不是没有啊

[复制链接]
卓奇虫虫 发表于 2013-1-12 16:35:56 | 显示全部楼层 |阅读模式
麻烦问下 天嵌指定的crosstools_3.4.5_softfloat工具光盘里是不是没有啊
我找了好久没找到 哪里能下载到么
 楼主| 卓奇虫虫 发表于 2013-1-12 16:37:31 | 显示全部楼层
我用的3.3.2的编译了通不过,指定的那个编译工具又找不到
TQ-lkp 发表于 2013-1-14 08:52:21 | 显示全部楼层
在这个压缩包中EABI-4.3.3_EmbedSky_20100610.tar.bz2
亚瑟王 发表于 2013-1-14 11:15:39 | 显示全部楼层
卓奇虫虫 发表于 2013-1-12 16:37
我用的3.3.2的编译了通不过,指定的那个编译工具又找不到

解压后的路径是/opt/EmbedSky/crosstools_3.4.5_softfloat。
 楼主| 卓奇虫虫 发表于 2013-1-14 15:17:24 | 显示全部楼层
亚瑟王 发表于 2013-1-14 11:15
解压后的路径是/opt/EmbedSky/crosstools_3.4.5_softfloat。

好的 感谢贵公司技术,我用这个3.4.5的试试。周末我用3.3.2的编译过了  
 楼主| 卓奇虫虫 发表于 2013-1-14 15:44:21 | 显示全部楼层
亚瑟王 发表于 2013-1-14 11:15
解压后的路径是/opt/EmbedSky/crosstools_3.4.5_softfloat。

我使用天嵌的编译器编译后提示错误:make: execvp: /root/Desktop/u-boot-1.1.6/mkconfig: Permission denied
make: *** [EmbedSky_config] Error 127
我用 chmod 777 mkconfig
后成功,在make时提示错误/opt/EmbedSky/crosstools_3.4.5_softfloat/gcc-3.4.5-glibc-2.3.6/arm-linux/bin/arm-linux-ld: hello_world.o: No such file: No such file or directory
make[1]: *** [hello_world] Error 1
make[1]: Leaving directory `/root/Desktop/u-boot-1.1.6/examples'
make: *** [examples] Error 2
请问如何解决
亚瑟王 发表于 2013-1-14 16:48:36 | 显示全部楼层
卓奇虫虫 发表于 2013-1-14 15:44
我使用天嵌的编译器编译后提示错误:make: execvp: /root/Desktop/u-boot-1.1.6/mkconfig: Permission de ...

先make distclean,然后再重新配置后编译。
 楼主| 卓奇虫虫 发表于 2013-1-15 09:05:41 | 显示全部楼层
亚瑟王 发表于 2013-1-14 16:48
先make distclean,然后再重新配置后编译。

我已经make distclean过了 ,make EmbedSky_config时是成功的,最后make还是显示/opt/EmbedSky/crosstools_3.4.5_softfloat/gcc-3.4.5-glibc-2.3.6/arm-linux/bin/arm-linux-ld: hello_world.o: No such file: No such file or directory
make[1]: *** [hello_world] Error 1
make[1]: Leaving directory `/root/Desktop/u-boot-1.1.6/examples'
make: *** [examples] Error 2
亚瑟王 发表于 2013-1-15 17:41:57 | 显示全部楼层
卓奇虫虫 发表于 2013-1-15 09:05
我已经make distclean过了 ,make EmbedSky_config时是成功的,最后make还是显示/opt/EmbedSky/crosstool ...

你的u-boot不是天嵌科技提供的吧?
你看一下你的uboot源码下的example目录下是否存在hello_world.c文件,如果不存在,请从天嵌科技光盘中的u-boot中拷贝过去。
xubeiping0930 发表于 2014-8-28 21:16:28 | 显示全部楼层
要注意那个u-boot-1.1.6里面Makefile文件中的CROSS_COMPILE的路径要更改为/etc/profile里面你修改的路径,要特别注意这个,否则就编译不出来。
您需要登录后才可以回帖 登录 | 注册

本版积分规则

关闭

i.MX8系列ARM cortex A53 M4 工控板上一条 /1 下一条

Archiver|手机版|小黑屋|天嵌 嵌入式开发社区 ( 粤ICP备11094220号 )

GMT+8, 2024-3-29 21:11 , Processed in 1.031250 second(s), 18 queries .

Powered by Discuz! X3.4

Copyright © 2001-2020, Tencent Cloud.

快速回复 返回顶部 返回列表