做QT移植提示错误信息，还有很多坏块怎么解决？

TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
usb 1-1: new full speed USB device using s3c2410-ohci and address 2
s3c2410-rtc s3c2410-rtc: setting system clock to 2009-11-12 14:03:40 UTC (1258034620)
usb 1-1: configuration #1 chosen from 1 choice
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs: auto selecting yaffs2
block 260 is bad
block 337 is bad
block 338 is bad
block 339 is bad
block 340 is bad
block 341 is bad
block 342 is bad
block 343 is bad
block 344 is bad
block 345 is bad
block 346 is bad
block 347 is bad
block 348 is bad
block 349 is bad
block 350 is bad
block 351 is bad
block 352 is bad
block 353 is bad
block 354 is bad
block 355 is bad
block 356 is bad
block 357 is bad
block 358 is bad
block 359 is bad
block 360 is bad
block 361 is bad
block 362 is bad
block 363 is bad
block 364 is bad
block 365 is bad
block 366 is bad
block 367 is bad
block 368 is bad
block 369 is bad
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:2.
Freeing init memory: 528K
Failed to execute /linuxrc.  Attempting defaults...
yaffs tragedy: no more erased blocks
!!!!!!!!! Allocator out !!!!!!!!!!!!!!!!!
yaffs tragedy: no more erased blocks
!!!!!!!!! Allocator out !!!!!!!!!!!!!!!!!
yaffs tragedy: no more erased blocks
!!!!!!!!! Allocator out !!!!!!!!!!!!!!!!!
mkdir: cannot create directory '/var/lock': Cannot allocate memory
xres = 800, yres = 480
Took 6 samples...
Top left : X =  179 Y =  102
Took 4 samples...
Top right : X =  202 Y =  919
Took 7 samples...
Bot right : X =  818 Y =  908
Took 4 samples...
Bot left : X =  822 Y =  107
Took 3 samples...
Center : X =  508 Y =  515
-43.323486 0.003859 0.865096
-61.495941 0.603337yaffs tragedy: no more erased blocks
!!!!!!!!! Allocator out !!!!!!!!!!!!!!!!!
yaffs tragedy: no more erased blocks
!!!!!!!!! Allocator out !!!!!!!!!!!!!!!!!
-0.007196
Calibration constants: -2839248 252 56694 -4030198 39540 -471 65536
wiggly: error while loading shared libraries: libts-0.0.so.0: cannot open shared object file: No such file or directory
dm9000 dm9000.0: WARNING: no IRQ resource flags set.
eth0: link down
route: SIOCADDRT: Network is unreachable

Please press Enter to activate this console.
Processing /etc/profile...
Done
mount: mounting /dev/sda1 on /mnt/udisk1 failed: No such file or directory
umount: can't umount /mnt/udisk1: No such file or directory

坏块一般是由多次烧写引起的假坏块，你格式化一下nand就可以了

TQ-lkp 发表于 2013-3-27 09:04
坏块一般是由多次烧写引起的假坏块，你格式化一下nand就可以了

出现那么多的坏块，格式化没用，需要清除坏块标志
进入u-boot命令行模式，执行命令
nand scrub

zjhsucceed_329 发表于 2013-3-27 12:36
出现那么多的坏块，格式化没用，需要清除坏块标志
进入u-boot命令行模式，执行命令
nand scrub

很久没上过论坛，忘了回复，确实是你说的那样，已经解决啦，谢啦