|
大家好~
想請教一下, 我手上是4月份購買的TQ210 V4電容屏的平台. 光盤是 TQ210 V1.1版的
用SD卡刷機之後, 無法開機. 我爬過文, 發現有相同或類似情況的帖子裡面的建議嘗試過後仍就失敗.
燒錄全是光盤上的檔案.
u-boot_TQ210_v1.1.bin
logo_800x480.bin
zImage_3.0.8_for_android_V1.0.bin
rootfs_android_4.0.4_V1.0.bin
有一點很奇怪. zImage的檔名, 如果用原來zImage_3.0.8_for_android_V1.0.bin就說找不到檔案, 改名zImage_3.0.8.bin就OK.
以下log, 請各位大德幫幫忙看看有沒有什麼問題. 感謝!
##### EmbedSky BIOS for SKY210/TQ210 #####
This Board: SDRAM is 1024MB; LCD display size is: 800X480
Hit any key to stop autoboot: 0
SD and FAT initialize success!
file length is 0x363.
condition=INSTALL
OSType=ANDROID
beep state=ON
bootloader=images\bootloader\u-boot_TQ210_v1.1.bin
file length is 0x64000.
NAND erase: device 0 offset 0x0, size 0x100000
Erasing at 0x0 -- 12% complete.
:
:
Erasing at 0xe0000 -- 100% complete.
OK
NAND write: device 0 offset 0x0, size 0x64000
Main area read (4 blocks):
Checksum is calculated.
Main area write (4 blocks):
524288 bytes written: OK
logodir=images\logo\logo_800x480.bin
file length is 0x177000.
NAND erase: device 0 offset 0x200000, size 0x300000
Erasing at 0x200000 -- 4% complete.
:
:
Erasing at 0x4e0000 -- 100% complete.
OK
NAND write: device 0 offset 0x200000, size 0x177000
Writing data at 0x200000 -- 0% complete.
:
:
Writing data at 0x376800 -- 100% complete.
1536000 bytes written: OK
Android zImage=images\android\zImage_3.0.8.bin
file length is 0x3a459c.
NAND erase: device 0 offset 0x500000, size 0x500000
Erasing at 0x500000 -- 2% complete.
:
:
Erasing at 0x9e0000 -- 100% complete.
OK
NAND write: device 0 offset 0x500000, size 0x3a459c
Writing data at 0x500000 -- 0% complete.
:
:
Writing data at 0x8a4000 -- 100% complete.
3818908 bytes written: OK
Android rootfs=images\android\rootfs_android_4.0.4_V1.0.bin
NAND erase: device 0 offset 0xa00000, size 0x3f600000
Erasing at 0xa00000 -- 0% complete.
:
:
Skipping bad block at 0x09b40000
Erasing at 0xa200000 -- 15% complete.
:
:
Erasing at 0x3ffe0000 -- 100% complete.
OK
NAND write: device 0 offset 0xa00000
Writing data at 0xa00000 -- 0% complete.
:
:
Bad block at 0x9b40000 in erase block from 0x9b40000 will be skipped
:
:
Writing data at 0xa0eb000 -- 100% complete.
163061184 bytes written: OK
Saving Environment to NAND...
Erasing Nand...
Erasing at 0x100000 -- 100% complete.
Writing to Nand... done
NAND read: device 0 offset 0x500000, size 0x500000
5242880 bytes read: OK
Boot with zImage
Starting kernel ...
|
|