tftp模式烧写tq3358开发板问题

群主，我烧写了tq3358的开发板，烧写成功后提示信息如下，请帮忙分析

NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)

usbcore: registered new interface driver Philips webcam
gspca_main: v2.14.0 registered
usbcore: registered new interface driver benq
usbcore: registered new interface driver conex
usbcore: registered new interface driver cpia1
usbcore: registered new interface driver etoms
usbcore: registered new interface driver finepix
usbcore: registered new interface driver jeilinj
usbcore: registered new interface driver kinect
usbcore: registered new interface driver konica
usbcore: registered new interface driver mars
usbcore: registered new interface driver mr97310a
usbcore: registered new interface driver nw80x
usbcore: registered new interface driver ov519
usbcore: registered new interface driver ov534
usbcore: registered new interface driver ov534_9
usbcore: registered new interface driver pac207
usbcore: registered new interface driver pac7302
usbcore: registered new interface driver pac7311
usbcore: registered new interface driver se401
usbcore: registered new interface driver sn9c2028
usbcore: registered new interface driver sn9c20x
usbcore: registered new interface driver sonixb
usbcore: registered new interface driver sonixj
usbcore: registered new interface driver spca500
usbcore: registered new interface driver spca501
usbcore: registered new interface driver spca505
usbcore: registered new interface driver spca506
usbcore: registered new interface driver spca508
usbcore: registered new interface driver spca561
usbcore: registered new interface driver spca1528
usbcore: registered new interface driver sq905
usbcore: registered new interface driver sq905c
usbcore: registered new interface driver sq930x
usbcore: registered new interface driver sunplus
usbcore: registered new interface driver stk014
usbcore: registered new interface driver stv0680
usbcore: registered new interface driver t613
usbcore: registered new interface driver gspca_topro
usbcore: registered new interface driver tv8532
usbcore: registered new interface driver vc032x
usbcore: registered new interface driver vicam
usbcore: registered new interface driver xirlink-cit
usbcore: registered new interface driver zc3xx
usbcore: registered new interface driver ALi m5602
usbcore: registered new interface driver STV06xx
usbcore: registered new interface driver gspca_gl860
usbcore: registered new interface driver s2255
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
Linux telephony interface: v1.00
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCILL protocol initialized
Bluetooth: BlueFRITZ! USB driver ver 1.2
usbcore: registered new interface driver bfusb
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
_regulator_get: 1-0018 supply IOVDD not found, using dummy regulator
_regulator_get: 1-0018 supply DVDD not found, using dummy regulator
_regulator_get: 1-0018 supply AVDD not found, using dummy regulator
_regulator_get: 1-0018 supply DRVDD not found, using dummy regulator
asoc: tlv320aic3x-hifi <-> davinci-mcasp.1 mapping ok
ALSA device list:
  #0: AM335X EVM
oprofile: hardware counters not available
oprofile: using timer interrupt.
nf_conntrack version 0.5.0 (7968 buckets, 31872 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20090105 abi 8)
NET: Registered protocol family 29
can: raw protocol (rev 20090105)
can: broadcast manager protocol (rev 20090105 t)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
lib80211: common routines for IEEE802.11 drivers
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
ThumbEE CPU extension supported.
mux: Failed to setup hwmod io irq -22
Power Management for AM33XX family
Trying to load am335x-pm-firmware.bin (60 secs timeout)
Copied the M3 firmware to UMEM
omap_hwmod: wkup_m3: wkup_m3: hwmod data error: OMAP4 does not support st_shift
clock: disabling unused clocks to save power
Detected MACID=bc:6a:29:83:e0:b1
input: gpio-keys as /devices/platform/gpio-keys/input/input1
Goodix-TS 2-005d: Install gt811 driver.
Goodix-TS 2-005d: Driver Release Date:2012-02-08
Goodix-TS 2-005d: GT811 Verion:0x2010
Goodix-TS 2-005d: chip_type=0x11
Goodix-TS 2-005d: version=0x1010
Goodix-TS 2-005d: rom_version=0x45
Goodix-TS 2-005d: start_addr=0x4100
Goodix-TS 2-005d: file_size=0x0ef0
Goodix-TS 2-005d: fw_checksum=0x0624ad
Goodix-TS 2-005d: gt811_downloader
Goodix-TS 2-005d: current version 0x2010, target verion 0x1010
Goodix-TS 2-005d: Rom version not match,exidownloader
Goodix-TS 2-005d: GT811 init info:X_MAX=800,Y_MAX=480,TRIG_MODE=RISING EDGE
input: Capacitance_ts as /devices/virtual/input/input2
Goodix-TS 2-005d: GT811 Verion:0x2010
Goodix-TS 2-005d: Create proc entry success!
Goodix-TS 2-005d: Start Capacitance_ts in interrupt mode,Driver Modify Date:2012-01-05
Failed to request GPIO:58, ERRNO:-16
gx801: probe of 2-0055 failed with error -16
omap_rtc omap_rtc: setting system clock to 2013-06-05 06:57:39 UTC (1370415459)
yaffs: dev is 32505864 name is "mtdblock8" rw
yaffs: yaffs: Attempting MTD mount of 31.8,"mtdblock8"
yaffs: yaffs_read_super: is_checkpointed 0
VFS: Mounted root (yaffs2 filesystem) on device 31:8.
Freeing init memory: 364K
Failed to execute /init.  Attempting defaults...
Kernel panic - not syncing: No init found.  Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
Backtrace:
[<c00181e0>] (dump_backtrace+0x0/0x10c) from [<c0594c24>] (dump_stack+0x18/0x1c)
r7:00000013 r6:c003f55c r5:c084d9d0 r4:c084d9d0
[<c0594c0c>] (dump_stack+0x0/0x1c) from [<c0594c8c>] (panic+0x64/0x198)
[<c0594c28>] (panic+0x0/0x198) from [<c0008804>] (init_post+0x84/0xd4)
r3:fffffffe r2:00000005 r1:00000080 r0:c06e1740
[<c0008780>] (init_post+0x0/0xd4) from [<c07962fc>] (kernel_init+0xf4/0x124)
r5:c07f03ec r4:c084cac0
[<c0796208>] (kernel_init+0x0/0x124) from [<c003f55c>] (do_exit+0x0/0x69c)

你的文件系统没有挂起，只想init时出错了，你的镜像是自己做的吧

我已经从咱们销售那拿到了新的加载文件，发现和我光盘里带的文件时一样的。加载后还是出现上面的问题，求解答:'(

wangs@gtwins.cn 发表于 2013-6-5 17:59
我已经从咱们销售那拿到了新的加载文件，发现和我光盘里带的文件时一样的。加载后还是出现上面的问题，求解 ...

那就只能你仔细阅读开发手册，一点有地方没操作对造成的。

wangs@gtwins.cn 发表于 2013-6-5 17:59
我已经从咱们销售那拿到了新的加载文件，发现和我光盘里带的文件时一样的。加载后还是出现上面的问题，求解 ...

亲，你是怎么烧写的？