|
PA FB = 0x4F905000, bits per pixel = 32
screen width=800 height=480 va=0xef905000 pa=0x4f905000
xres_virtual = 800, yres_virtual = 960, xoffset = 0, yoffset = 0
fb_size=3072000
Back frameBuffer[0].VAddr=efa7c000 PAddr=4fa7c000 size=1536000
brd: module
s5p-ehci s5p-ehci: S5P EHCI Host Controller
s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
s5p-ehci s5p-ehci: irq 87, io mem 0xec200000
s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s5p-ohci s5p-ohci: EXYNOS OHCI Host Controller
s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
s5p-ohci s5p-ohci: irq 87, io mem 0xec300000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
s3c-udc : version 15 March 2009 (DMA Mode)
android_usb gadget: Mass Storage Function, version: 2009/09/11
android_usb gadget: Number of LUNs=1
lun0: LUN: removable file: (no medium)
android_usb gadget: android_usb ready
Registered gadget driver 'android_usb'
mousedev: PS/2 mouse device common for all mice
gpio-keys init
input: gpio-keys as /devices/platform/gpio-keys/input/input0
input: s3c_ts as /devices/virtual/input/input1
S5P Touchscreen driver, (c) 2008 Samsung Electronics
user a70 param
s3c_ts got loaded successfully : 10 bits
input: s3c_ts as /devices/virtual/input/input2
TSSEL : 1
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
using rtc device, s3c, for alarms
s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
i2c /dev entries driver
lirc_dev: IR Remote Control driver registered, major 250
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR LIRC bridge handler initialized
Linux video capture interface: v2.00
gspca: v2.13.0 registered
mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
S3C JPEG Driver, (c) 2007 Samsung Electronics
JPEG driver for S5PV210
i2c i2c-1: attached s5p_ddc into i2c adapter successfully
S5PC11X HPD Driver, (c) 2010 Samsung Electronics
S5PC11X CEC Driver, (c) 2010 Samsung Electronics
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
Bluetooth: Virtual HCI driver ver 1.3
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
Bluetooth: HCIATH3K protocol initialized
Bluetooth: Broadcom Blutonium firmware driver ver 1.2
usbcore: registered new interface driver bcm203x
Bluetooth: Digianswer Bluetooth USB driver ver 0.10
usbcore: registered new interface driver bpa10x
Bluetooth: BlueFRITZ! USB driver ver 1.2
usbcore: registered new interface driver bfusb
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
Bluetooth: Generic Bluetooth SDIO driver ver 0.1
usb 1-1: new high speed USB device number 2 using s5p-ehci
Bluetooth: Atheros AR30xx firmware driver ver 1.0
usbcore: registered new interface driver ath3k
cpuidle: usinGoodix-TS 2-005d: GT811 init info:X_MAX=800,Y_MAX=480,TRIG_MODE=RISING EDGE
usb 1-1.1: new low speed USB device number 3 using s5p-ehci
input: Goodix as /devices/virtual/input/input3
input: Logitech USB Optical Mouse as /devices/platform/s5p-ehci/usb1/1-1/1-1.1/1-1.1:1.0/input/input4
generic-usb 0003:046D:C05A.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-s5p-ehci-1.1/input0
usb 1-1.4: new high speed USB device number 4 using s5p-ehci
Goodix-TS 2-005d: GT811 Verion:0x2010
Goodix-TS 2-005d: Create proc entry success!
Goodix-TS 2-005d: Start Goodix in interrupt mode,Driver Modify Date:2012-01-05
probe_succeed goodix_ts_probe,916,drivers/input/touchscreen/gt811.c
s3c-rtc s3c64xx-rtc: setting system clock to 2000-02-17 17:26:11 UTC (950808371)
FIMC0 registered successfully
FIMC1 registered successfully
FIMC2 registered successfully
S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
s5p-tvout s5p-tvout: hpd status is cable inserted
yaffs: dev is 32505859 name is "mtdblock3" rw
yaffs: yaffs: Attempting MTD mount of 31.3,"mtdblock3"
option 1-1.4:1.0: GSM modem (1-port) converter detected
usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB0
option 1-1.4:1.1: GSM modem (1-port) converter detected
usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB1
option 1-1.4:1.2: GSM modem (1-port) converter detected
usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB2
option 1-1.4:1.3: GSM modem (1-port) converter detected
usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB3
yaffs: yaffs_read_super: is_checkpointed 0
VFS: Mounted root (yaffs2 filesystem) on device 31:3.
Freeing init memory: 168K
init: cannot open '/initlogo.rle'
[init] SMB380 is error!
Acceleration_sensor: probe of Acceleration_sensor failed with error -1
input: Android Temperature Sensor as /devices/virtual/input/input5
rtusb init rt2870 --->
usbcore: registered new interface driver rt2870
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
android_usb: already disabled
/system/bin/sh: No controlling tty (open /dev/tty: No such device or address)
/system/bin/sh: warning: won't have full job control
adb_open
adb_bind_config
android_work: did not send uevent (0 0 (null))
android_work: sent uevent USB_STATE=CONNECTED
android_usb gadget: high speed config #1: android
android_work: sent uevent USB_STATE=CONFIGURED
root@android:/ # warning: `rild' uses 32-bit capabilities (legacy support in use)
asoc: wm8960-hifi <-> samsung-i2s.0 mapping ok
asoc: wm8960-hifi <-> samsung-i2s.0 mapping ok
PVR_KWarning): SysFinalise: Version string: SGX540 S5PC110 [543, drivers/gpu/pvr/s5pc110/sysconfig.c]
win->id=0, pmem_start=0x4f4a0000
s3cfb s3cfb: [fb0] dma: 0x4f4a0000, cpu: 0xf8000000, size: 0x00465000
s3cfb s3cfb: [fb1] dma: 0x4cc00000, cpu: 0xffa00000, size: 0x002ee000
er.ServerThread (2298): /proc/2284/oom_adj is deprecated, please use /proc/2284/oom_score_adj instead.
request_suspend_state: wakeup (3->0) at 66230439460 (2000-02-17 17:27:15.544692593 UTC)
acc_open
acc_release
dm9000 dm9000: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
dm9000 dm9000: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
130|root@android:/ # generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
generic-usb 0003:046D:C05A.0001: can't reset device, s5p-ehci-1.1/input0, status -71
hub 1-1:1.0: port 1 disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 3
usb 1-1.1: new low speed USB device number 5 using s5p-ehci
input: Logitech USB Optical Mouse as /devices/platform/s5p-ehci/usb1/1-1/1-1.1/1-1.1:1.0/input/input6
generic-usb 0003:046D:C05A.0002: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-s5p-ehci-1.1/input0
EPLL Rate changes from 80000000 to 67738000
s3c2410_serial3: 1 input overrun(s) |
|