|
在TQ210的开发板上使用Nand Flash启动,能正常进入系统界面,但换到USB启动模式时,能够传输uboot到内存中,读取nand flash中的内核镜像文件,但解压完内核后就停在那里,什么都做不了,究竟是什么原因?
以下是启动时的串口输出信息:
准备下载210固件
下载属性:
文件大小 : 11168 (0MB)
起始地址 : 0xd0020010
结束地址 : 0xd0022bb0
开始下载...
210固件下载完成
准备下载文件: D:\tftpboot\u-boot.bin
下载属性:
文件大小 : 409600 (0MB)
起始地址 : 0x23e00000
结束地址 : 0x23e64000
开始下载...
下载完成
OK
##### EmbedSky BIOS for SKY210/TQ210 #####
This Board: SDRAM is 1024MB; LCD display size is: 800X480
Hit any key to stop autoboot: 0
SD Read NG
Fat32 file system initialzation failed!
Start Linux ......
NAND read: device 0 offset 0x500000, size 0x500000
5242880 bytes read: OK
Boot with zImage
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
|
|