wince 6.0 启动不显示桌面

我自己编译的wince6.0，启动以后，不显示桌面，串口输出如下，大家是否遇到过这样的问题？


WinCE 6.0 Steploader for TQ2416

Microsoft Windows CE Bootloader Common Library Version 1.4 Built Sep 15 2012 15:38:06
Microsoft Windows CE Bootloader for the EmbedSky TQ2416 Version 2.4 Built Sep 15 2012

Press [ENTER] to launch image stored on boot media, or [SPACE] to enter boot monitor.

Initiating image launch in 0 seconds.

Launching image from boot media ...
OEMPlatformInit: IMAGE_TYPE_RAMIMAGE
INFO: Using static IP address 121816.
INFO: Using subnet mask 2525250.
waitforconnect
INFO: using TOC[1] dwJumpAddress: 0x80205ec0
INFO: OEMLaunch: Jumping to Physical Address 0x30205EC0h (Virtual Address 0x80205EC0h)...


Windows CE Kernel for ARM (Thumb Enabled) Built on Sep 14 2011 at 17:32:03
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb
DDRRAM capacity is 64MB
DCache: 128 sets, 4 ways, 32 line size, 16384 size
ICache: 128 sets, 4 ways, 32 line size, 16384 size
FCLK:400000000, HCLK:133333333, PCLK:66666666
Arguments area has some values
-OEMInit
FMD_OEMIoControl: IOCTL_FMD_GET_INTERFACE
FMD_OEMIoControl: unrecognized IOCTL (0x71c24).
OEM: Not clearing storage
OEM: Not cleaning system hive
OEM: Not cleaning user profiles
OEM: Not cleaning system hive
DEBUG: CreateSerialObject 0

启动一半就死了，lz要追查代码找原因吧

问题是我没有改动任何东西，你们光盘里面的代码编译完了 下载好了 就这样  

qidaimengxing 发表于 2013-8-27 15:34
问题是我没有改动任何东西，你们光盘里面的代码编译完了 下载好了 就这样

http://www.armbbs.net/forum.php?mod=viewthread&tid=16445