|
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Linux version 3.2.0-EmbedSky (root@embedsk-server) (gcc version 4.4.6 (for TQ210 EmbedSky Tech) ) #1 Mon Aug 26 18:52:14 CST 2013
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: tq3358
Memory policy: ECC disabled, Data cache writeback
AM335X ES1.0 (sgx neon )
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: console=ttyO0,115200n8 androidboot.console=ttySAC0 root=/dev/mtdblock8 rootfstype=yaffs2 rw rootwait=1 init=/init ip=off lcd=X800Y480 uart1_d_can=d_can uart2_i2c2=i2c2
user X800Y480 lcd.
uart1_d_can, user select d_can.
uart2_i2c2, user select i2c2.
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512MB = 512MB total
Memory: 509540k/509540k available, 14748k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0814000 (8240 kB)
.init : 0xc0814000 - 0xc0852000 ( 248 kB)
.data : 0xc0852000 - 0xc08b4260 ( 393 kB)
.bss : 0xc08b4284 - 0xc09f8708 (1298 kB)
NR_IRQS:396
IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
Total of 128 interrupts on 1 active controller
OMAP clockevent source: GPTIMER2 at 24000000 Hz
omap_dm_timer_switch_src: Switching to HW default clocksource(sys_clkin_ck) for timer1, this may impact timekeeping in low power state
OMAP clocksource: GPTIMER1 at 24000000 Hz
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
Console: colour dummy device 80x30
Calibrating delay loop... 718.02 BogoMIPS (lpj=3590144)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
omap_hwmod: gfx: failed to hardreset
omap_hwmod: pruss: failed to hardreset
print_constraints: dummy:
NET: Registered protocol family 16
OMAP GPIO hardware version 0.1
omap_mux_init: Add partition: #1: core, flags: 0
da8xx_lcdc.0: alias fck already exists
TSC connected to beta GP EVM
omap_i2c.1: alias fck already exists
omap_i2c.2: alias fck already exists
davinci-mcasp.1: alias fck already exists
omap_hsmmc.0: alias fck already exists
d_can.0: alias fck already exists
d_can.1: alias fck already exists
omap_i2c.3: alias fck already exists
omap2_mcspi.1: alias fck already exists
omap2_mcspi.2: alias fck already exists
edma.0: alias fck already exists
edma.0: alias fck already exists
edma.0: alias fck already exists
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
musb-ti81xx musb-ti81xx: musb0, board_mode=0x13, plat_mode=0x3
musb-ti81xx musb-ti81xx: musb1, board_mode=0x13, plat_mode=0x1
omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 100 kHz
tps65910 1-002d: JTAGREVNUM 0x1
print_constraints: VRTC:
print_constraints: VIO: at 1500 mV
print_constraints: VDD1: 600 <--> 1500 mV at 1262 mV normal
print_constraints: VDD2: 600 <--> 1500 mV at 1137 mV normal
print_constraints: VDD3: 5000 mV
print_constraints: VDIG1: at 1800 mV
print_constraints: VDIG2: at 1800 mV
print_constraints: VPLL: at 1800 mV
print_constraints: VDAC: at 1800 mV
print_constraints: VAUX1: at 1800 mV
print_constraints: VAUX2: at 3300 mV
print_constraints: VAUX33: at 3300 mV
print_constraints: VMMC: at 3300 mV
tps65910 1-002d: No interrupt support, no core IRQ
warn Power up reset detected.
omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 100 kHz
omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz
Advanced Linux Sound Architecture Driver Version 1.0.24.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource gp timer
musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
musb-hdrc musb-hdrc.0: dma type: pio
musb-hdrc musb-hdrc.0: USB OTG mode controller at e081c000 using PIO, IRQ 18
musb-hdrc musb-hdrc.1: dma type: pio
musb-hdrc musb-hdrc.1: MUSB HDRC host driver
musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: MUSB HDRC host driver
usb usb1: Manufacturer: Linux 3.2.0-EmbedSky musb-hcd
usb usb1: SerialNumber: musb-hdrc.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
musb-hdrc musb-hdrc.1: USB Host mode controller at e081e800 using PIO, IRQ 19
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NetWinder Floating Point Emulator V0.97 (double precision)
omap-gpmc omap-gpmc: GPMC revision 6.0
Registering NAND on CS0
ashmem: initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
yaffs: yaffs built Aug 26 2013 18:51:43 Installing.
msgmni has been set to 995
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
da8xx_lcdc da8xx_lcdc.0: GLCD: Found A70_TN92 panel
Console: switching to colour frame buffer device 100x30
omap_uart.0: ttySAC0 at MMIO 0x44e09000 (irq = 72) is a OMAP UART0
console [ttyO0] enabled
omap_uart.1: ttySAC1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1
omap_uart.2: ttySAC2 at MMIO 0x48024000 (irq = 74) is a OMAP UART2
omap_uart.3: ttySAC3 at MMIO 0x481a6000 (irq = 44) is a OMAP UART3
omap_uart.4: ttySAC4 at MMIO 0x481a8000 (irq = 45) is a OMAP UART4
omap_uart.5: ttySAC5 at MMIO 0x481aa000 (irq = 46) is a OMAP UART5
Register led successfully!
Register beep successfully!
brd: module loaded
loop: module loaded
i2c-core: driver [tsl2550] using legacy suspend method
i2c-core: driver [tsl2550] using legacy resume method
mtdoops: mtd device (mtddev=name/number) must be supplied
omap2-nand driver initializing
NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit)
Creating 9 MTD partitions on "omap2-nand.0":
0x000000000000-0x000000020000 : "SPL"
0x000000020000-0x000000040000 : "SPL.backup1"
0x000000040000-0x000000060000 : "SPL.backup2"
0x000000060000-0x000000080000 : "SPL.backup3"
0x000000080000-0x000000260000 : "U-Boot"
0x000000260000-0x000000280000 : "U-Boot Env"
0x000000280000-0x000000580000 : "LOGO"
0x000000580000-0x000000a80000 : "Kernel"
0x000000a80000-0x000040000000 : "File System"
CAN device driver interface
CAN bus driver for Bosch D_CAN controller 1.0
d_can d_can.0: device registered (irq=52, irq_obj=53)
d_can d_can.1: device registered (irq=55, irq_obj=56)
davinci_mdio davinci_mdio.0: davinci mdio revision 1.6
davinci_mdio davinci_mdio.0: detected phy mask ffffffde
davinci_mdio.0: probed
davinci_mdio davinci_mdio.0: phy[0]: device 0:00, driver unknown
davinci_mdio davinci_mdio.0: phy[5]: device 0:05, driver unknown
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
usbcore: registered new interface driver zd1201
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver cdc_eem
usbcore: registered new interface driver dm9601
usbcore: registered new interface driver cdc_subset
cdc_ncm: 04-Aug-2011
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usb 1-1: new high-speed USB device number 2 using musb-hdrc
usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB 2.0 Hub
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
gadget: Mass Storage Function, version: 2009/09/11
gadget: Number of LUNs=1
|
|