TQ210,E8 sdio wifi源码更新

2014-02-26更新：        问题描述：        android4 sdio        解决方法：        修改android源码添加sdio支持        下载附件中的sdio.tar.bz2，替换android源码下的目录。重新编绎文件系统        注意事项：               替换后编绎的镜像只支持SDIO wifi，不再支持usb wifi，需要用到usb wifi的客户请不要替换或做好备份工作。        淘宝链接(只适合TQ210)：http://item.taobao.com/item.htm?spm=a1z10.5.w4002-3558571408.11.FGYIVO&id=37025058591        附件下载：

请问有人更新并成功开启wifi模块的么？

我的老是卡在turning Wifi on...

~~~

以下為logcat報錯訊息，有人可以幫忙解惑嗎

1. E/WifiStateMachine( 2360): Failed to reload STA firmware java.lang.IllegalStateException: Error communicating to native daemon
   
2. W/CommandListener( 2145): Failed to retrieve HW addr for wlan0 (No such device)
   
3. D/CommandListener( 2145): Setting iface cfg
   
4. E/WifiStateMachine( 2360): Unable to change interface settings: java.lang.IllegalStateException: Unable to communicate with native daemon to interface setcfg - com.android.server.NativeDaemonConnectorException: Cmd {interface setcfg wlan0 0.0.0.0 0 [down]} failed with code 400 : {Failed to set address (No such device)}
   
5. D/NetworkManagementService( 2360): rsp <213 00:00:00:00:00:00 0.0.0.0 0 [down]>
   
6. D/NetworkManagementService( 2360): flags <[down]>
   
7. E/WifiHW  ( 2360): Unable to open connection to supplicant on "wlan0": No such file or directory
   
8. D/AudioHardware( 2150): AudioHardware pcm playback is going to standby.
   
9. D/AudioHardware( 2150): closePcmOut_l() mPcmOpenCnt: 1
   
10. I/wpa_supplicant( 3358): CTRL-EVENT-STATE-CHANGE id=-1 state=0
    
11. E/wpa_supplicant( 3358): Failed to disable WPA in the driver.
    
12. E/WifiHW  ( 2360): Supplicant not running, cannot connect
    
13. E/WifiHW  ( 2360): Supplicant not running, cannot connect
    
14. E/WifiHW  ( 2360): Supplicant not running, cannot connect
    
15. E/WifiHW  ( 2360): Supplicant not running, cannot connect
    
16. E/WifiHW  ( 2360): Supplicant not running, cannot connect
    
17. E/WifiStateMachine( 2360): Failed to setup control channel, restart supplicant
    
18. E/dhcpcd  ( 2826): timed out
    
19. E/WifiStateMachine( 2360): Failed to reload STA firmware java.lang.IllegalStateException: Error communicating to native daemon
    
20. W/CommandListener( 2145): Failed to retrieve HW addr for wlan0 (No such device)
    
21. D/CommandListener( 2145): Setting iface cfg
    
22. E/WifiStateMachine( 2360): Unable to change interface settings: java.lang.IllegalStateException: Unable to communicate with native daemon to interface setcfg - com.android.server.NativeDaemonConnectorException: Cmd {interface setcfg wlan0 0.0.0.0 0 [down]} failed with code 400 : {Failed to set address (No such device)}
    
23. D/NetworkManagementService( 2360): rsp <213 00:00:00:00:00:00 0.0.0.0 0 [down]>

复制代码

...之後就是不斷重複上面的區塊

還請板大板友幫忙

jkkl 发表于 2014-3-6 10:48
~~~

請問 jkkl 有成功編譯出來嗎～？

請問這對TQ210 coreB有用嗎？我的也是SIDO WIFI，可是更新了也是找不到無線網路，另外也有人更新後也是無法作用( http://www.armbbs.net/forum.php? ... 32&page=1#pid257666 )
還請版大解惑

我的作法是直接將資料夾合併至文件系統的資料夾內，build結束後的rootfs.bin還是不能正常使用wifi功能...

請問版上有人成功讓TQ210上的SIDO WIFI動起來嗎？謝謝好心人回覆。

QT下的驱动什么时候更新啊

我要下来看看