How to change the WINCE for VGA Output?

dariush_abbasi · 发表于 2014-4-25 21:26:24

Hi.
I want to change the file but i can't find it in "C:\WINCE600\PLATFORM\COMMON\SRC\SOC\S5PV210_SEC_V1\OAL\INC" PATH , i can just find the file "lcd_params.h" in "C:\WINCE600\PLATFORM\E8\SRC\INC" and i changed it to "#define LCD_DEFAULT_MODULE (LCD_MODULE_VGA800600)" but after compilation makes no difference!
Would you please tell me where should be modified?

dariush_abbasi · 发表于 2014-4-25 23:15:59

本帖最后由 dariush_abbasi 于 2014-4-25 23:55 编辑

Is it enough to Change the "NK.bin" or the "bootimage.nb0" Also must be changed in Order to Take Effect When changing the "bootimage.nb0" the following Error happens:? ERROR: OALVAtoPA: invalid virtual address 0x00000000 Thanks.

dariush_abbasi · 发表于 2014-4-26 16:36:59

本帖最后由 dariush_abbasi 于 2014-4-26 19:01 编辑

Is "bootimage.nb0" responsible for display output type OR u-boot_E8_CE_20131228 OR ....?What is the default WINCE ip address?

dariush_abbasi · 发表于 2014-4-28 21:28:18

Hi.
Dose E8 's BSP really support VGA or HDMI???

RTPrope · 发表于 2021-9-14 12:26:00

Hi,

with or without extension card, what should one get to display the video output of a Zero on a VGA display?
I thought of using a jack to female rca cable, but then... I have not found a cable from rca to vga, but found some boxes that seem to be able to convert the signal.

Thanks.

		自动登录	找回密码
密码			注册

How to change the WINCE for VGA Output?

-

i.MX8系列ARM cortex A53 M4 工控板 /1