燒原廠代碼一直重啟

完全按手冊上的做
也可以燒完
但是會一直重啟
log如下 ...

android_work: sent uevent USB_STATE=CONFIGURED
POR ]

*** Warning - bad CRC or MMC, using default environment

烧写了哪些镜像？
串口信息太少看不到原因
把logcat贴上来看下亲！

我燒光盤上的  /出厂烧录镜像合集/Android镜像
另外手冊60頁

[1]ubuntu used emmc //设置默认从EMMC启动Android系统

這樣到底是啟動 ubuntu 還是android阿 ?

logcat 我後來改單屏顯示 CRC 又沒出來了
我再抓過...

update logcat
-------------------------------------------------------------------------------

I/MediaProvider( 2956): Upgrading media database from version 0 to 511, which will destroy all old data
D/        ( 2932): [ApnCusb 2-1: new high speed USB device number 4 using fsl-ehci
ontext:default] set reason as dataEnabled,current state IDLE
D/        ( 2932): [ApnContext:default] setRetryCount: 0
D/        ( 2932): [ApnContext:mms] set reason as dataEnabled,current state IDLE
D/        ( 2932): [ApnContext:mms] setRetryCount: 0
D/        ( 2932): [ApnContext:supl] set reason as dataEnabled,current state IDLE
D/        ( 2932): [ApnContext:supl] setRetryCount: 0
D/        ( 2932): [ApnContext:hipri] set reason as dataEnabled,current state IDLE
D/        ( 2932): [ApnContext:hipri] setRetryCount: 0
D/        ( 2932): [ApnContext:fota] set reason as dataEnabled,current state IDLE
D/        ( 2932): [ApnContext:fota] setRetryCount: 0
D/        ( 2932): [ApnContext:ims] set reason as dataEnabled,current state IDLE
D/        ( 2932): [ApnContext:ims] setRetryCount: 0
D/        ( 2932): [ApnContext:cbs] set reason as dataEnabled,current state IDLE
D/        ( 2932): [ApnContext:cbs] setRetryCount: 0
D/dalvikvm( 2717): GC_CONCURRENT freed 405K, 56% free 4466K/10052K, paused 2ms+5ms, total 49ms
D/TelephonyManager( 2932): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType=''
W/BackupManagerService( 2717): dataChanged but no participant pkg='com.android.providers.settings' uid=10030
D/libEGL  ( 2836): loaded /system/lib/egl/libEGL_VIVANTE.so
D/libEGL  ( 2836): loaded /system/lib/egl/libGLESv1_CM_VIVANTE.so
D/CallManager( 2932): registerPhone(GSM Handler (com.android.internal.telephony.PhoneProxy) {41029ec8})
I/ActivityManager( 2717): START u0 {act=android.intent.action.MAIN cat=[android.intent.category.HOME] flg=0x10000000 cmp=com.android.launcher/com.android.launcher2.Launcher} from pid 0
D/BluetoothManagerService( 2717): Message: 20
D/BluetoothManagerService( 2717): Added callback: android.bluetooth.IBluetoothManagerCallback$Stub$Proxy@4133d758:true
D/libEGL  ( 2836): loaded /system/lib/egl/libGLESv2_VIVANTE.so
I/ActivityManager( 2717): Start proc com.android.launcher for activity com.android.launcher/com.android.launcher2.Launcher: pid=3047 uid=10020 gids={50020, 1028, -1}
E/BufferQueue( 2426): [StatusBar] dequeueBuffer: can't dequeue multiple buffers without setting the buffer count
D/OpenGLRenderer( 2836): Enabling debug mode 0
D/dalvikvm( 2932): GC_CONCURRENT freed 186K, 12% free 2644K/2996K, paused 5ms+6ms, total 41ms
D/BluetoothManagerService( 2717): Message: 30
E/BufferQueue( 2426): [NavigationBar] dequeueBuffer: can't dequeue multiple buffers without setting the buffer count
I/ContactsProviderV1( 2897): Bootstrapping database legacy support
D/MediaProvider( 2956): Adjusting external storage paths to: /storage/emulated/0
D/DebugService( 2932): DebugService DebugService:
D/TelephonyDebugService( 2932): TelephonyDebugService()
D/dalvikvm( 2836): GC_CONCURRENT freed 75K, 6% free 4161K/4400K, paused 3msusb 2-1: new high speed USB device number 5 using fsl-ehci
+3ms, total 49ms
D/BluetoothManagerService( 2717): Message: 30
E/BluetoothPhoneService( 2932): Could not get a handle on Connection object for the call
I/PhoneApp( 2932): Headset phone created, binding local service.
D/dalvikvm( 2836): GC_FOR_ALLOC freed 38K, 5% free 4199K/4404K, paused 21ms, total 21ms
I/dalvikvm-heap( 2836): Grow heap (frag case) to 7.187MB for 3072016-byte allocation
D/dalvikvm( 3047): GC_CONCURRENT freed 170K, 12% free 2642K/2984K, paused 3ms+3ms, total 21ms
D/dalvikvm( 2836): GC_CONCURRENT freed 1K, 3% free 7197K/7408K, paused 4ms+3ms, total 24ms
E/SQLiteLog( 2956): (1) no such table: album_info
I/DownloadManager( 2956): in removeSpuriousFiles
D/dalvikvm( 2836): GC_FOR_ALLOC freed <1K, 3% free 7197K/7408K, paused 18ms, total 18ms
I/dalvikvm-heap( 2836): Grow heap (frag case) to 9.627MB for 2560016-byte allocation
D/dalvikvm( 2956): GC_CONCURRENT freed 225K, 14% free 2592K/2984K, paused 3ms+2ms, total 34ms
D/dalvikvm( 3047): GC_FOR_ALLOC freed 34K, 8% free 2754K/2984K, paused 21ms, total 21ms
I/dalvikvm-heap( 3047): Grow heap (frag case) to 3.460MB for 640016-byte allocation
D/dalvikvm( 2836): GC_CONCURRENT freed 0K, 3% free 9697K/9912K, paused 3ms+3ms, total 25ms
D/dalvikvm( 2836): WAIT_FOR_CONCURRENT_GC blocked 18ms
D/dalvikvm( 3047): GC_FOR_ALLOC freed 2K, 7% free 3376K/3612K, paused 38ms, total 38ms
D/MtpService( 2956): updating state; isCumtp_open
rrentUser=true, mMtpLocked=false
I/DownloadManager( 2956): Upgrading downloads database from version 0 to version 108, which will destroy all old data
D/MtpService( 2956): addStorageLocked 65537 /storage/emulated/0
D/MtpService( 2956): updating state; isCurrentUser=true, mMtpLocked=false
E/BufferQueue( 2426): [com.android.systemui.ImageWallpaper] dequeueBuffer: can't dequeue multiple buffers without setting the buffer count
D/MtpService( 2956): starting MTP server in

*** Warning - bad CRC or MMC, using default environment

我開始覺得是 板子問題了
Kernel Log
--------------------------------
snvs_rtc snvs_rtc.0: setting system clock to 1970-01-24 23:20:40 UTC (2071240)
^[OFFreeing init memory: 240K
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
camera_subdev: disagrees about version of symbol module_layout
root@android:/ # android_usb: already disabled
android_usb: already disabled
mtp_bind_config
warning: `rild' uses 32-bit capabilities (legacy support in use)
ov3640_write_reg:write reg error:reg=3012,val=80
ov3640_write_reg:write reg error:reg=3012,val=80
ERROR: v4l2 capture: slave not found!
ov3640_write_reg:write reg error:reg=3012,val=80
ERROR: v4l2 capture: slave not found!
ehci_fsl_bus_suspend begins, Host 1
ehci_fsl_bus_suspend ends, Host 1
request_suspend_state: wakeup (3->0) at 16561100338 (1970-01-24 23:20:53.526526003 UTC)
eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:00, irq=-1)
ADDRCONF(NETDEV_UP): eth0: link is not ready
acc_open
acc_release
ehci_fsl_bus_resume begins, Host 1
ehci_fsl_bus_resume ends, Host 1
usb 2-1: USB disconnect, device number 2
usb 2-1: new high speed USB device number 3 using fsl-ehci
hub 2-0:1.0: unable to enumerate USB device on port 1
ehci_fsl_bus_resume begins, DR
POR ]

*** Warning - bad CRC or MMC, using default environment

crazycat 发表于 2014-5-7 12:12
我開始覺得是 板子問題了
Kernel Log
--------------------------------

老兄，请问板子重启这个问题，你是怎么解决的啊？

你是在做什么时板子重启的.板子重启前终端或者界面有没有卡死的现象. 如果可以建议不要用我们发的电源换个好一点的电源(恒压源)看下.