TQ210启动后黑屏

以下是部分信息，全部信息在附件里
##### EmbedSky BIOS for SKY210/TQ210 #####
This Board: SDRAM is 1024MB; LCD display size is: 800X480
Hit any key to stop autoboot:  0
Start Linux ......
NAND read: device 0 offset 0x500000, size 0x500000

5242880 bytes read: OK
Boot with zImage

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Initializing cgroup subsys cpu
Linux version 3.0.8-EmbedSky (root@embedsk-server) (gcc version 4.4.6 (for TQ210 EmbedSky Tech) )  PREEMPT Thu Aug 8 21:45:41 CST 2013
CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: TQ210
Truncating RAM at 40000000-5fffffff to -54ffffff (vmalloc region overlap).

sclk_onenand: source is hclk_dsys (1), rate is 166750000
uclk1: source is mout_mpll (6), rate is 66700000
。。。。。。。。。。。
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 183602
Kernel command line: noinitrd root=/dev/mtdblock3 rootfstype=yaffs2 init=/init console=ttySAC0 lcd=X800Y480
user X800Y480 lcd.
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 458MB 265MB 0MB = 723MB total
Memory: 722724k/849884k available, 18468k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xff000000 - 0xffe00000   (  14 MB)
    vmalloc : 0xf5800000 - 0xfd000000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf5000000   ( 848 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .init : 0xc0008000 - 0xc0033000   ( 172 kB)
      .text : 0xc0033000 - 0xc08f0b48   (8951 kB)
      .data : 0xc08f2000 - 0xc094a380   ( 353 kB)
       .bss : 0xc094a3a4 - 0xc0a89990   (1278 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:208
VIC @fd000000: id 0x00041192, vendor 0x41
VIC @fd010000: id 0x00041192, vendor 0x41
VIC @fd020000: id 0x00041192, vendor 0x41
VIC @fd030000: id 0x00041192, vendor 0x41
mult[140737]
max_delta_ns[2937815369]
min_delta_ns[30517]
rate[32768]
HZ[256]
Console: colour dummy device 80x30
Calibrating delay loop... 994.84 BogoMIPS (lpj=1941504)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys cpuacct
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
print_constraints: dummy:
NET: Registered protocol family 16
ENter s3c_adc_set_platdata,devname(s5pv210-adc)
S3C Power Management, Copyright 2004 Simtec Electronics
invalid media device
invalid media device
invalid media device
invalid media device
user a70 param
smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
S5PV210: Initializing architecture
s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
s3c24xx-pwm s3c24xx-pwm.2: tin at 4168750, tdiv at 4168756000
Back frameBuffer[1].VAddr=f10dc000 PAddr=510dc000 size=1536000
Back frameBuffer[2].VAddr=f1253000 PAddr=51253000 size=1536000
Back frameBuffer[3].VAddr=f13ca000 PAddr=513ca000 size=1536000
brd: module loaded
loop: module loaded
pmem_gpu1: 1 init
S3C NAND Driver, (c) 2008 Samsung Electronics
S3C NAND Driver is using hardware ECC.
NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit)
Creating 4 MTD partitions on "s5pv210-nand":
0x000000000000-0x000000200000 : "Bootloader"
0x000000200000-0x000000500000 : "LOGO"
0x000000500000-0x000000a00000 : "Kernel"
0x000000a00000-0x000040000000 : "ROOTFS"
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
dm9000 Ethernet Driver, V1.31
dm9000_set_io byte_width 1
dm9000_set_io byte_width 2
dm9000 revision 0x1a io_mode 00
eth0: dm9000c at f5830300,f5832304 IRQ 42 MAC: 00:09:c2:ff:ec:68 (platform data)
hso: drivers/net/usb/hso.c: Option Wireless
usbcore: registered new interface driver hso
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
s5p-ehci s5p-ehci: S5P EHCI Host Controller
s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
s5p-ehci s5p-ehci: irq 87, io mem 0xec200000
s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s5p-ohci s5p-ohci: EXYNOS OHCI Host Controller
s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
s5p-ohci s5p-ohci: irq 87, io mem 0xec300000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
s3c-udc : version 15 March 2009 (DMA Mode)
android_usb gadget: Mass Storage Function, version: 2009/09/11
android_usb gadget: Number of LUNs=1
lun0: LUN: removable file: (no medium)
android_usb gadget: android_usb ready
Registered gadget driver 'android_usb'
mousedev: PS/2 mouse device common for all mice
gpio-keys init
input: gpio-keys as /devices/platform/gpio-keys/input/input0
input: tq210_hs0038 as /devicesirtual/input/input1
Input: S3C GPIO  hs0038 Registered
S5P Touchscreen driver, (c) 2008 Samsung Electronics
user a70 param
s3c_ts got loaded successfully : 10 bits
input: s3c_ts as /devicesirtual/input/input2
TSSEL : 1
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
using rtc device, s3c, for alarms
s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
i2c /dev entries driver
lirc_dev: IR Remote Control driver registered, major 250
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR LIRC bridge handler initialized
Linux video capture interface: v2.00
i2c-core: driver [tuner] using legacy suspend method
i2c-core: driver [tuner] using legacy resume method
i2c-core: driver [msp3400] using legacy suspend method
i2c-core: driver [msp3400] using legacy resume method
usbcore: registered new interface driver em28xx
em28xx driver loaded
Em28xx: Initialized (Em28xx Audio Extension) extension
cx231xx v4l2 driver loaded.
usbcore: registered new interface driver cx231xx
cx231xx: Cx231xx Audio Extension initialized
usbcore: registered new interfyaffs: yaffs_read_super: is_checkpointed 0
VFS: Mounted root (yaffs2 filesystem) on device 31:3.
Freeing init memory: 172K
init: cannot open '/initlogo.rle'
[init] SMB380 is error!
Acceleration_sensor: probe of Acceleration_sensor failed with error -1
input: Android Temperature Sensor as /devicesirtual/input/input4
rtusb init rt2870 --->
usbcore: registered new interface driver rt2870
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
android_usb: already disabled
android_work: did not send uevent (0 0   (null))
/system/bin/sh: No controlling tty (open /dev/tty: No such device or address)
/system/bin/sh: warning: won't have full job control
root@android:/ # asoc: wm8960-hifi <-> samsung-i2s.0 mapping ok
asoc: wm8960-hifi <-> samsung-i2s.0 mapping ok
warning: `rild' uses 32-bit capabilities (legacy support in use)
PVR_K:(Warning): SysFinalise: Version string: SGX540 S5PC110 [543, drivers/gpu/pvr/s5pc110/sysconfig.c]
win->id=0, pmem_start=0x50989000
s3cfb s3cfb: [fb0] dma: 0x50989000, cpu: 0xf8800000, size: 0x00465000
s3cfb s3cfb: [fb1] dma: 0x4e000000, cpu: 0xffa00000, size: 0x002ee000
pmem: request for physical address of pmem region from process 2428.

130|oot@android:/ # er.ServerThread (2488): /proc/2474m_adj is deprecated, please use /proc/2474m_score_adj instead.
request_suspend_state: wakeup (3->0) at 65371737960 (2000-01-01 00:01:50.349732731 UTC)
acc_open
acc_release
10|root@android:/ # dm9000 dm9000: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready

130|root@android:/ # binder: release proc 2433, transaction 9872, not freed

我也是这个问题！！会不会是烧写顺序的问题！！或者内核源码有问题，反正教程里面的内核源码和资料包里面的源码！不同！！！！