开发板进不了LINUX 已经按教程烧写了U-boot，linux内核，文件系统，开机log

##### SmileTuning BIOS for ST2440 #####
Press Space key to Download Mode !


#####    Boot for Nor Flash Main Menu   #####
[1] Download u-boot or STEPLDR.nb1 or other bootloader to Nand Flash
[2] Download Eboot to Nand Flash
[3] Download Linux Kernel to Nand Flash
[5] Download CRAMFS image to Nand Flash
[6] Download YAFFS image to Nand Flash
[7] Download Program (uCOS-II or ST2440_Test) to SDRAM and Run it
[8] Boot the system
[9] Format the Nand Flash
[0] Set the boot parameters
[a] Download User Program (eg: uCOS-II or ST2440_Test)
Download LOGO Picture (.bin) to Nand  Flash
[l] Set LCD Parameters
[o] Download u-boot to Nor Flash
[r] Reboot u-boot
[t] Test Linux Image (zImage)
[q] quit from menu
Enter your selection: 8
Start Linux ...
Copy linux kernel from 0x00200000 to 0x30008000, size = 0x00200000 ... Copy Kernel to SDRAM done,NOW, Booting Linux......
Undompressing Linux...


ran out of input data


-- System halt

你是用什么方式烧写的，检查内核镜像烧对了吗

wbz073 发表于 2014-9-1 09:17
你是用什么方式烧写的，检查内核镜像烧对了吗

试了一下光盘的其它内核和文件系统 已经能成功启动了