关于烧写wince6.0镜像到TQ2440开发板的步骤

按照官方给的资料烧写wince镜像一直没有成功每次都是   Don't support raw image
!OEMVERIFYMEMORY: Invalid image
而且都是还没下载之前就打印出这条消息
这说明不是没下载进去的问题
而是前面设置有问题

后面我打电话具体咨询了一下，原来是USB下载的时候，要都选择uboot下载，不管是在uboot模式下还是eboot模式下，按照官方烧写完之后，
接着就会打印出
Addr: 0x30000000 ; Size: 0x1FF49DA
Read Bin Files StartAddr:0x80200000 ; Length: 0x2076CE4

Download BIN file information:
-----------------------------------------------------
[0]: Base Address=0x80200000  Length=0x2076ce4
-----------------------------------------------------
+=OEMVerifyMemory+ dwStartAddr:0x80200000  dwLength:0x2076ce4
RAM image 0xa 0x82276ce3
rom_offset=0x0.
ROMHDR at Address 80200044h
+WriteOSImageToBootMedia: g_dwTocEntry =1, ImageStart: 0x80200000, ImageLength: 0x2076ce4, LaunchAddr:0x80201000
INFO: OEMLaunch: Found chain extenstion: '' @ 0x80200000
Writing single region/multi-region update, dwBINFSPartLength: 34041060
CreatePartition: Enter CreatePartition for 0x21.
LastLogSector: Last log sector is: 0x7eeff.
CreatePartition: Start = 0x1100, Num = 0x10400.
WriteMBR: MBR block = 0x10.
WriteData: Start = 0x0, Length = 0x2076ce4.
Updateded TOC!
然后等大概十几秒后屏幕就会出现wince的画面了

顶一下。