请问一下，usb-modeswitch 转换过程出现的问题，根据step by step自制文件系统

Reading config file: /usr/sbin/usb_modeswitch.conf

* usb_modeswitch: handle USB devices with multiple modes
* Version 1.1.6 (C) Josua Dietze 2010
* Based on libusb0 (0.1.12 and above)

! PLEASE REPORT NEW CONFIGURATIONS !

DefaultVendor=  0x12d1
DefaultProduct= 0x1505
TargetVendor=   0x12d1
TargetProduct=  0x140c
TargetClass=    not set
TargetProductList=""

DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
GCTMode=0
KobilMode=0
MessageEndpoint=0x01
MessageContent="55534243123456780000000000000011060000000000000000000000000000"
NeedResponse=0
ResponseEndpoint= not set
Interface=0x00

InquireDevice enabled (default)
Success check enabled, max. wait time 20 seconds
System integration mode disabled


Looking for target devices ...
  searching devices, found USB ID 1d6b:0001
  searching devices, found USB ID 12d1:1505
   found matching vendor ID
No devices in target mode or class found
Looking for default devices ...
  searching devices, found USB ID 1d6b:0001
  searching devices, found USB ID 12d1:1505
   found matching vendor ID
   found matching product ID
   adding device
Found devices in default mode, class or configuration (1)
Accessing device 004 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using endpoints 0x01 (out) and 0x87 (in)
Using endpoints 0x01 (out) and 0x87 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
No driver found. Either detached before or never attached
libusb: 0.000000 error [submit_bulk_transfer] submiturb failed error -1 errno=2
Could not send INQUIRY message (error -5)

USB description data (for identification)
-------------------------
Manufacturer: HUA

应该是你的设备描述跟你的设备不匹配