求救

我移植的是2.6.33的内核，并且自己做了根文件系统yaffs2，用的busybox是1.17
结果出现以下的错误，不知道什么原因……
到这一步，是不是说明init进程已经创建成功啊？
希望高人指点一二

TCP cubic registered
NET: Registered protocol family 17
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
yaffs: dev is 32505859 name is "mtdblock3"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.3, "mtdblock3"
yaffs: auto selecting yaffs2
block 349 is bad
usb 1-1: new full speed USB device using s3c2410-ohci and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:3.
Freeing init memory: 140K
request_module: runaway loop modprobe binfmt-464c
request_module: runaway loop modprobe binfmt-464c
request_module: runaway loop modprobe binfmt-464c
request_module: runaway loop modprobe binfmt-464c
request_module: runaway loop modprobe binfmt-464c


INFO: task swapper:1 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
swapper       D c02a78dc     0     1      0 0x00000000
Backtrace:
[<c02a7628>] (schedule+0x0/0x304) from [<c02a7e7c>] (schedule_timeout+0x20/0x184)
[<c02a7e5c>] (schedule_timeout+0x0/0x184) from [<c02a7a28>] (wait_for_common+0xfc/0x1a0)
r6:c381be30 r5:7fffffff r4:c381bde8
[<c02a792c>] (wait_for_common+0x0/0x1a0) from [<c02a7ae4>] (wait_for_completion+0x18/0x1c)
r7:00000000 r6:00000001 r5:c03bc774 r4:c39b1c60
[<c02a7acc>] (wait_for_completion+0x0/0x1c) from [<c005b828>] (call_usermodehelper_exec+0xc8/0x128)
[<c005b760>] (call_usermodehelper_exec+0x0/0x128) from [<c005b9a8>] (__request_module+0x120/0x164)
r8:c0394338 r7:c039101c r6:00000001 r5:c03bc778 r4:00000001
[<c005b888>] (__request_module+0x0/0x164) from [<c00a57d8>] (search_binary_handler+0x214/0x234)
r3:00000076 r2:0000464c r1:c033fbd8
r7:00000000 r6:c381a000 r5:c38961c0 r4:c0394338
[<c00a55c4>] (search_binary_handler+0x0/0x234) from [<c00a596c>] (do_execve+0x174/0x260)

你用你的内核镜像烧写天嵌科技提供的文件系统，能否启动成功。