yaffs文件系统的问题

自己做文件系统要下载到板子里，我用的是2.6.25.8的内核，配置完成时，用3.4.5编译器编译，
busybox-1.13.0也是用3.4.5编译器编译的，u-boot-1.1.6-dm9000的Makefile里的128行改为3..4.5的编译器了，把他们们下载后出现
s3c2410-wdt s3c2410-wdt: watchdog active, reset abled, irq enabled
s3c2440-sdi s3c2410-sdi: unable to get DMA channel.
s3c2440-sdi s3c2410-sdi: powered down.
s3c2440-sdi s3c2410-sdi: initialisation done.
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
s3c2440-sdi s3c2410-sdi: powered down.
UDA1341 audio driver initialized
TCP cubic registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
s3c2410-rtc s3c2410-rtc: setting system clock to 2009-08-29 15:54:46 UTC (125156
1286)
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
VFS: Mounted root (yaffs filesystem).
Freeing init memory: 188K
Warning: unable to open an initial console.
Failed to execute /linuxrc.  Attempting defaults...
Kernel panic - not syncing: No init found.  Try passing init= option to kernel.

的错误，u-boot，内核，Busybox是不是要用同一编译器啊，我选的是3.4.5编译器？？？？
还有光盘里带的u-boot_ZImage_W35.bin使用说明编译器编的？？
在dev目录下已经建立了 console null这两个设备
chmod 600 console
chmod 666 null 也已经做过

我也遇到相同问题，关注中，关注中！

文件系统也要用3.4.5的编译器来制作。

uboot 内核 以及文件系统都用同一个编译器。。。