为什么我的WInCE5.0无法启动呢？

Microsoft Windows CE Bootloader for TQ2440/SKY2440 Version 2.4 Built May 13 2010

Press [ENTER] to launch image stored on boot media, or [SPACE] to enter boot monitor.

Initiating image launch in 1 seconds.
然后一直这样！

给的信息没法知道错误。
你烧写我们的镜像看看

2# embedsky_lxt
请问下要是DM9000坏了，会不会照成操作系统不能启动呢？

不会的了！网友

4# embedsky_lxt


版主，我又重新烧写了下，logo、eboot和steplder都下进NANDFLASH，然后按照要求从nandflash启动，并按住空格键，但是还是停留在：
Microsoft Windows CE Bootloader for TQ2440/SKY2440 Version 2.4 Built May 13 2010

Press [ENTER] to launch image stored on boot media, or [SPACE] to enter boot monitor.

Initiating image launch in 1 seconds.

4# embedsky_lxt


我把NANDFLASH格式化了一下，又重新下载了下，现在出现以下信息：
##### Eboot for TQ2440/SKY2440 #####
#####     www.embedsky.net     #####

Microsoft Windows CE Bootloader for TQ2440/SKY2440 Version 2.4 Built May 13 2010

TOC_Read ERROR: INVALID_TOC Signature: 0xFFFFFFFF
TOC_Init: dwEntry:1, dwImageType: 0x2, dwImageStart: 0x0, dwImageLength: 0x0, dwLaunchAddr: 0x0
+BootConfigInit
-BootConfigInit
TOC {
dwSignature: 0x434F544E
BootCfg {
  ConfigFlags: 0x2830
  BootDelay: 0x1
  ImageIndex: 1
  IP: 192.168.1.6
  MAC Address: 10:23:45:67:89:AB
  Port: 0.0.0.0
  SubnetMask: 255.255.255.0
}
ID[0] {
  dwVersion: 0x20004
  dwSignature: 0x45424F54
  String: 'eboot.nb0'
  dwImageType: 0x2
  dwTtlSectors: 0x400
  dwLoadAddress: 0x80038000
  dwJumpAddress: 0x80038000
  dwStoreOffset: 0x0
  sgList[0].dwSector: 0x400
  sgList[0].dwLength: 0x400
}
ID[1] {
  dwVersion: 0x1
  dwSignature: 0x43465348
  String: ''
  dwImageType: 0x2
  dwTtlSectors: 0x0
  dwLoadAddress: 0x0
  dwJumpAddress: 0x0
  dwStoreOffset: 0x0
}
chainInfo.dwLoadAddress: 0X00000000
chainInfo.dwFlashAddress: 0X00000000
chainInfo.dwLength: 0X00000000
}
Press [ENTER] to launch image stored on boot media, or [SPACE] to enter boot monitor.

Initiating image launch in 1 seconds.

你意思是说按住空格键没有任何的反应么？
你留意一下PC的空格键哟！！
如果实在不行，我给你远程看看

7# embedsky_lxt


现在提示这些信息：
Microsoft Windows CE Bootloader for TQ2440/SKY2440 Version 2.4 Built May 13 2010

TOC_Read ERROR: INVALID_TOC Signature: 0xFFFFFFFF
TOC_Init: dwEntry:1, dwImageType: 0x2, dwImageStart: 0x0, dwImageLength: 0x0, dwLaunchAddr: 0x0
+BootConfigInit
-BootConfigInit
TOC {
dwSignature: 0x434F544E
BootCfg {
  ConfigFlags: 0x2830
  BootDelay: 0x1
  ImageIndex: 1
  IP: 192.168.1.6
  MAC Address: 10:23:45:67:89:AB
  Port: 0.0.0.0
  SubnetMask: 255.255.255.0
}
ID[0] {
  dwVersion: 0x20004
  dwSignature: 0x45424F54
  String: 'eboot.nb0'
  dwImageType: 0x2
  dwTtlSectors: 0x400
  dwLoadAddress: 0x80038000
  dwJumpAddress: 0x80038000
  dwStoreOffset: 0x0
  sgList[0].dwSector: 0x400
  sgList[0].dwLength: 0x400
}
ID[1] {
  dwVersion: 0x1
  dwSignature: 0x43465348
  String: ''
  dwImageType: 0x2
  dwTtlSectors: 0x0
  dwLoadAddress: 0x0
  dwJumpAddress: 0x0
  dwStoreOffset: 0x0
}
chainInfo.dwLoadAddress: 0X00000000
chainInfo.dwFlashAddress: 0X00000000
chainInfo.dwLength: 0X00000000
}
Press [ENTER] to launch image stored on boot media, or [SPACE] to enter boot monitor.

Initiating image launch in 1 seconds.

然后就一直在这了。。。。。。。。